Concise, visual explanations of code provisions that apply to wind loads This practical guide provides engineers with a visual overview of the code provisions pertinent to wind loads. Free of complicated and confusing explanations, the book includes numerous design aids, figures, and flowcharts that clearly demonstrate the code provisions. Written by a recognized expert in the field, Wind Loads: Time-Saving Methods Using the 2018 IBC and ASCE/SEI 7-16 contains simplified, step-by-step procedures that can be applied to main wind force resisting systems and components and cladding of building and nonbuilding structures. Examples and companion online Excel spreadsheets can be used to accurately and efficiently calculate wind loads. Coverage includes wind load requirements for: Wind velocity pressure Gust effects on rigid and flexible buildings and other structures Main wind force resisting systems of buildings and other structures Components and cladding of buildings and other structures Enclosed, partially enclosed, partially open, and open buildings of all heights Low-rise buildings Roof overhangs and parapets Building appurtenances and other structures Solid freestanding walls and signs Chimneys, tanks, open signs, single-plane open frames, and trussed towers Rooftop structures and equipment Circular bins, silos, and tanks Rooftop solar panels

Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Concise, visual explanations of code provisions that apply to rain, snow, and ice loads This practical guide provides engineers with a visual overview of the code provisions pertinent to rain, snow, and ice loads. Rain, Snow, and Ice Loads: Time-Saving Methods Using the 2018 IBC and ASCE/SEI 7-16 contains simplified, step-by-step procedures that can be applied to determine each load. Included are design aids, figures, flowcharts, and examples that clearly demonstrate each procedure. Companion online Excel spreadsheets can be used in practice to calculate loads accurately and efficiently. Contains step-by-step procedures for: Design rain loads Ponding instability and ponding loads Flat roof snow loads Sloped roof snow loads Partial snow loads Unbalanced roof snow loads Drift loads on lower roofs and adjacent structures Drift loads adjacent to roof projections and parapets Sliding snow loads Rain-on-snow surcharge loads Snow loads on open-frame equipment structures Ice loads due to freezing rain

Authors Coulbourne and Stafford provide a comprehensive overview of the wind load provisions in Minimum Design Loads and Associated Criteria for Buildings and Other Structures, ASCE/SEI 7-16, focusing on the provisions that affect the planning, design, and construction of buildings for residential and commercial purposes.

Calculate structural loads in compliance with the 2018 IBC® and ASCE/SEI 7-16This practical guide shows, step by step, how to interpret and apply the load provisions contained in the 2018 IBC® and ASCE/SEI 7-16. You will learn how to accurately determine structural loads including dead loads, live loads, and environmental loads. Throughout the book, detailed design examples, unique flowcharts, and design aids illustrate the proper usage of the code within the scope of everyday practice. Coverage includes:•Structural load fundamentals•IBC® and ASCE 7 explanations•Load combinations•Dead, live, rain, and soil lateral loads•Snow and ice loads•Wind loads•Earthquake loads•Flood and tsunami loads•Load paths

Authors Charney, Heausler, and Marshall provide clear, authoritative explanations of the seismic design provisions contained in Minimum Design Loads and Associated Criteria for Buildings and Other Structures, Standard ASCE/SEI 7-16.

* Reflects recent changes in the model building codes and in the MBMA (Metal Building Manual Association) manual * New review questions after each chapter * Revised data on insulation necessary to meet the new energy codes * New material on renovations of primary frames, secondary members, roofing, and walls

MEET THE COMPLEX CHALLENGES OF METAL BUILDING SYSTEMS FOUNDATION DESIGN Expand your professional design skills and engineer safe, reliable foundations and anchors for metal building systems. Written by a practicing structural engineer, Foundation and Anchor Design Guide for Metal Building Systems thoroughly covers the entire process--from initial soil investigation through final design and construction. The design of different types of foundations is explained and illustrated with step-by-step examples. The nuts-and-bolts discussion covers the best design and construction practices. This detailed reference book explains how the design of metal building foundations differs from the design of conventional foundations and how to comply with applicable building codes while avoiding common pitfalls. COVERAGE INCLUDES: Metal building and foundation design fundamentals Soil types, properties, and investigation Unique aspects of foundation design for metal building systems Design of isolated column footings Foundation walls and wall footings Tie rods, hairpins, and slab ties Moment-resisting foundations Slab with haunch, trench footings, and mats Deep foundations Anchors in metal building systems Concrete embedments in metal building systems

A PRACTICAL GUIDE TO REINFORCED CONCRETE STRUCTURE ANALYSIS AND DESIGN Reinforced Concrete Structures explains the underlying principles of reinforced concrete design and covers the analysis, design, and detailing requirements in the 2008 American Concrete Institute (ACI) Building Code Requirements for Structural Concrete and Commentary and the 2009 International Code Council (ICC) International Building Code (IBC). This authoritative resource discusses reinforced concrete members and provides techniques for sizing the cross section, calculating the required amount of reinforcement, and detailing the reinforcement. Design procedures and flowcharts guide you through code requirements, and worked-out examples demonstrate the proper application of the design provisions. COVERAGE INCLUDES: Mechanics of reinforced concrete Material properties of concrete and reinforcing steel Considerations for analysis and design of reinforced concrete structures Requirements for strength and serviceability Principles of the strength design method Design and detailing requirements for beams, one-way slabs, two-way slabs, columns, walls, and foundations

This Task Committee report provides standardized equations for calculating reference evapotranspiration (ET) from weather data and procedures for quality assessment and control of weather data. The purpose of the standardized reference ET equation and calculation procedures is to bring commonality to the calculation of reference ET and to provide a standardized basis for determining or transferring crop coefficients for agriculture and landscape use. The basis of the standardized reference ET equation is the ASCE Penman-Monteith (ASCE-PM) method Manual 70. Along with applications for the ASCE-PM method, this report includes recommended calculations for vapor pressure, net radiation and wind speed adjustment, and guidelines on assessing weather data integrity and estimating values for missing data. The development of this standardized report by the Environmental and Water Resources Committee (EWRI) of ASCE, was made at the request of, and has been endorsed by, the Irrigation Association.

Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The industry-standard guide to structural engineering—fully updated for the latest advances and regulations For 50 years, this internationally renowned handbook has been the go-to reference for structural engineering specifications, codes, technologies, and procedures. Featuring contributions from a variety of experts, the book has been revised to align with the codes that govern structural design and materials, including IBC, ASCE 7, ASCE 37, ACI, AISC, AASHTO, NDS, and TMS. Concise, practical, and user-friendly, this one-of-a-kind resource contains real-world examples and detailed descriptions of today’s design methods. Structural Engineering Handbook, Fifth Edition, covers: • Computer applications in structural engineering • Earthquake engineering • Fatigue, brittle fracture, and lamellar tearing • Soil mechanics and foundations • Design of steel structural and composite members • Plastic design of steel frames • Design of cold-formed steel structural members • Design of aluminum structural members • Design of reinforced- and prestressed-concrete structural members • Masonry construction and timber structures • Arches and rigid frames • Bridges and girder boxes • Building design and considerations • Industrial and tall buildings • Thin-shell concrete structures • Special structures and nonbuilding structures