* Reflects recent changes in the model building codes and in the MBMA (Metal Building Manual Association) manual * New review questions after each chapter * Revised data on insulation necessary to meet the new energy codes * New material on renovations of primary frames, secondary members, roofing, and walls

MEET THE COMPLEX CHALLENGES OF METAL BUILDING SYSTEMS FOUNDATION DESIGN Expand your professional design skills and engineer safe, reliable foundations and anchors for metal building systems. Written by a practicing structural engineer, Foundation and Anchor Design Guide for Metal Building Systems thoroughly covers the entire process--from initial soil investigation through final design and construction. The design of different types of foundations is explained and illustrated with step-by-step examples. The nuts-and-bolts discussion covers the best design and construction practices. This detailed reference book explains how the design of metal building foundations differs from the design of conventional foundations and how to comply with applicable building codes while avoiding common pitfalls. COVERAGE INCLUDES: Metal building and foundation design fundamentals Soil types, properties, and investigation Unique aspects of foundation design for metal building systems Design of isolated column footings Foundation walls and wall footings Tie rods, hairpins, and slab ties Moment-resisting foundations Slab with haunch, trench footings, and mats Deep foundations Anchors in metal building systems Concrete embedments in metal building systems

This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.

This book provides the means for a better control and purposeful consideration of the design of Architecturally Exposed Structural Steel (AESS). It deploys a detailed categorization of AESS and its uses according to design context, building typology and visual exposure. In a rare combination, this approach makes high quality benchmarks compatible with economies in terms of material use, fabrication methods, workforce and cost. Building with exposed steel has become more and more popular worldwide, also as advances in fire safety technology have permitted its use for building tasks under stringent fire regulations. On her background of long standing as a teacher in architectural steel design affiliated with many institutions, the author ranks among the world‘s best scholars on this topic. Among the fields covered by the extensive approach of this book are the characteristics of the various categories of AESS, the interrelatedness of design, fabrication and erection of the steel structures, issues of coating and protection (including corrosion and fire protection), special materials like weathering steel and stainless steel, the member choices and a connection design checklist. The description draws on many international examples from advanced contemporary architecture, all visited and photographed by the author, among which figure buildings like the Amgen Helix Bridge in Seattle, the Shard Observation Level in London, the New York Times Building and the Arganquela Footbridge.

Provides updated, comprehensive, and practical information and guidelines on aspects of building design and construction, including materials, methods, structural types, components, and costs, and management techniques.

A concise guide to the structural design of low-rise buildings in cold-formed steel, reinforced masonry, and structural timber This practical reference discusses the types of low-rise building structural systems, outlines the design process, and explains how to determine structural loadings and load paths pertinent to low-rise buildings. Characteristics and properties of materials used in the construction of cold-formed steel, reinforced masonry, and structural timber buildings are described along with design requirements. The book also provides an overview of noncomposite and composite open-web joist floor systems. Design code requirements referenced by the 2009 International Building Code are used throughout. This is an ideal resource for structural engineering students, professionals, and those preparing for licensing examinations. Structural Design of Low-Rise Buildings in Cold-Formed Steel, Reinforced Masonry, and Structural Timber covers: Low-rise building systems Loads and load paths in low-rise buildings Design of cold-formed steel structures Structural design of reinforced masonry Design of structural timber Structural design with open-web joists

First course for the learners of steel structural design at UG level, this book is based on limit state design as per the Indian Code of Practice – General construction in steel – IS 800-2007. It explains theoretical concepts which form the basis of codal provisions. Emphasis lies on principal axes based compression members, peripheral load distribution for base plates, limit state design of base plate bearing column with moment, unsymmetrically loaded beam design, tension field web design in plate girders, section and member design for bi-axially loaded beam columns which are unique to the book. Practical insight provided in chapters of applied design.

A Thoroughly Updated Guide to the Design of Steel Structures This comprehensive resource offers practical coverage of steel structures design and clearly explains the provisions of the 2015 International Building Code, the American Society of Civil Engineers ASCE 7-10, and the American Institute of Steel Construction AISC 360-10 and AISC 341-10. Steel Structures Design for Lateral and Vertical Forces, Second Edition, features start-to-finish engineering strategies that encompass the entire range of steel building materials, members, and loads. All techniques strictly conform to the latest codes and specifications. A brand new chapter on the design of steel structures for lateral loads explains design techniques and innovations in concentrically and eccentrically braced frames and moment frames. Throughout, design examples, including step-by-step solutions, and end-of-chapter problems using both ASD and LRFD methods demonstrate real-world applications and illustrate how code requirements apply to both lateral and vertical forces. This up-to-date Second Edition covers: · Steel Buildings and Design Criteria · Design Loads · Behavior of Steel Structures under Design Loads · Design of Steel Beams in Flexure · Design of Steel Beams for Shear and Torsion · Design of Compression Members · Stability of Frames · Design by Inelastic Analysis · Design of Tension Members · Design of Bolted and Welded Connections · Plate Girders and Composite Members · Design of Steel Structures for Lateral Loads