This book presents the architecture of two networks that make up the backbone of the telephone service VoLTE and video service ViLTE. The 4G mobile network makes it possible to construct bearers through which IP packets, containing either telephone signals (SIP, SDP) or voice or video media (RTP stream), are transported. The IMS network performs the processing of the telephone signal to provide VoLTE and ViLTE services, including call routing and the provision of additional services. Different procedures are described: the set-up and termination of a session, interconnection with third-party networks, roaming and intra-system handover. The inter-system handover PS-CS is a special case that occurs when the mobile loses 4G network coverage over the course of a session. The e-SRVCC mechanism enables continuity of the service during the switch of the telephone communication to the 2G or 3G networks. The SMS service for short messages, which is a special telephone service in itself, is provided by two structures, one relying on the IMS network, and a second on the CSFB functionality.

Essential reference providing best practice of LTE-A, VoLTE, and IoT Design/deployment/Performance and evolution towards 5G This book is a practical guide to the design, deployment, and performance of LTE-A, VoLTE/IMS and IoT. A comprehensive practical performance analysis for VoLTE is conducted based on field measurement results from live LTE networks. Also, it provides a comprehensive introduction to IoT and 5G evolutions. Practical aspects and best practice of LTE-A/IMS/VoLTE/IoT are presented. Practical aspects of LTE-Advanced features are presented. In addition, LTE/LTE-A network capacity dimensioning and analysis are demonstrated based on live LTE/LTE-A networks KPIs. A comprehensive foundation for 5G technologies is provided including massive MIMO, eMBB, URLLC, mMTC, NGCN and network slicing, cloudification, virtualization and SDN. Practical Guide to LTE-A, VoLTE and IoT: Paving the Way Towards 5G can be used as a practical comprehensive guide for best practices in LTE/LTE-A/VoLTE/IoT design, deployment, performance analysis and network architecture and dimensioning. It offers tutorial introduction on LTE-A/IoT/5G networks, enabling the reader to use this advanced book without the need to refer to more introductory texts. Offers a complete overview of LTE and LTE-A, IMS, VoLTE and IoT and 5G Introduces readers to IP Multimedia Subsystems (IMS)Performs a comprehensive evaluation of VoLTE/CSFB Provides LTE/LTE-A network capacity and dimensioning Examines IoT and 5G evolutions towards a super connected world Introduce 3GPP NB-IoT evolution for low power wide area (LPWA) network Provide a comprehensive introduction for 5G evolution including eMBB, URLLC, mMTC, network slicing, cloudification, virtualization, SDN and orchestration Practical Guide to LTE-A, VoLTE and IoT will appeal to all deployment and service engineers, network designers, and planning and optimization engineers working in mobile communications. Also, it is a practical guide for R&D and standardization experts to evolve the LTE/LTE-A, VoLTE and IoT towards 5G evolution.

This book presents LTE evolution towards 5G mobile communication and the emergence of new requirements for MBB, MTC and LLC services. As LTE technologies evolve, LTE Advanced Pro dramatically increases cell capacity and user data rates for the MBB unicast service. Such requirements are obtained using full-dimension MIMO, carrier aggregation (on either licensed or unlicensed frequency bands) and dual connectivity. To improve the efficiency of same-content delivery to multiple users, 3GPP proposes a group communications service over LTE and defines mission critical push-to-talk (MCPTT) for dedicated public safety services. Complementary low-cost and low-power modems with enhanced coverage and massive connectivity are emerging. Thus, this book also discusses the need for LTE to support low-rate transmission and high-latency communication for MTC services.

A comprehensive resource containing the operating principles and key insights of LTE networks performance optimization LTE Optimization Engineering Handbook is a comprehensive reference that describes the most current technologies and optimization principles for LTE networks. The text offers an introduction to the basics of LTE architecture, services and technologies and includes details on the key principles and methods of LTE optimization and its parameters. In addition, the author clarifies different optimization aspects such as wireless channel optimization, data optimization, CSFB, VoLTE, and video optimization. With the ubiquitous usage and increased development of mobile networks and smart devices, LTE is the 4G network that will be the only mainstream technology in the current mobile communication system and in the near future. Designed for use by researchers, engineers and operators working in the field of mobile communications and written by a noted engineer and experienced researcher, the LTE Optimization Engineering Handbook provides an essential guide that: Discusses the latest optimization engineering technologies of LTE networks and explores their implementation Features the latest and most industrially relevant applications, such as VoLTE and HetNets Includes a wealth of detailed scenarios and optimization real-world case studies Professionals in the field will find the LTE Optimization Engineering Handbook to be their go-to reference that includes a thorough and complete examination of LTE networks, their operating principles, and the most current information to performance optimization.

This book constitutes the refereed proceedings of the IFIP WG 8.6 International Working Conference on Transfer and Diffusion of IT, TDIT 2023, which took place in Nagpur, India, in December 2023. The 87 full papers and 23 short papers presented in these proceedings were carefully reviewed and selected from 209 submissions. The papers are organized in the following topical sections: Volume I: Digital technologies (artificial intelligence) adoption; digital platforms and applications; digital technologies in e-governance; metaverse and marketing. Volume II: Emerging technologies adoption; general IT adoption; healthcare IT adoption. Volume III: Industry 4.0; transfer, diffusion and adoption of next-generation digital technologies; diffusion and adoption of information technology.

The adoption of smartphones has had as a corollary the use of services that require streaming, such as video streaming, which is a constraint for the 4G mobile network. The integration of the network of Wi-Fi hotspots deployed by the operators adds capacity to the 4G mobile network. The use of Wi-Fi technology in carrier networks is the result of developments coordinated by the IEEE, WFA and WBA standardization bodies. For its part, the 3GPP standardization body has been working to integrate Wi-Fi technology into the 4G mobile network. The first part of this book presents the characteristics of the Wi-Fi radio interface. The different IEEE 802.11b / g / n / ac physical layers characterize the implementation in the 2.4 GHz ISM frequency bands and U- NII at 5 GHz. The MAC layer defines a number of media access procedures such as scanning, associating, or transferring data. The second part of this book deals with the architecture of the 4G network based on the Wi-Fi interface. This architecture defines several models corresponding, on the one hand, to Wi-Fi access controlled or not, On the other hand, to a handover controlled by the network or by the mobile. The integration of Wi-Fi technology resulted in a redefinition of attachment and session set-up procedures. Smartphones have the ability to activate simultaneously the two radio interfaces, LTE and Wi-Fi, which allows to direct certain services to one and / or the other of the interfaces. The ANDSF and HotSpot 2.0 functions provide the mobile with rules for network selection and traffic control to determine which traffic is to be routed to what type of interface.

There have been considerable developments in information and communication technology. This has led to an increase in the number of applications available, as well as an increase in their variability. As such, it has become important to understand and master problems related to establishing radio links, the layout and flow of source data, the power available from antennas, the selectivity and sensitivity of receivers, etc. This book discusses digital modulations, their extensions and environment, as well as a few basic mathematical tools. An understanding of degree level mathematics or its equivalent is a prerequisite to reading this book. Digital Communication Techniques is aimed at licensed professionals, engineers, Masters students and researchers whose field is in related areas such as hardware, phase-locked loops, voltage-controlled oscillators or phase noise.

This book reviews the concept of Software-Defined Networking (SDN) by studying the SDN architecture. It provides a detailed analysis of state-of-the-art distributed SDN controller platforms by assessing their advantages and drawbacks and classifying them in novel ways according to various criteria. Additionally, a thorough examination of the major challenges of existing distributed SDN controllers is provided along with insights into emerging and future trends in that area. Decentralization challenges in large-scale networks are tackled using three novel approaches, applied to the SDN control plane presented in the book. The first approach addresses the SDN controller placement optimization problem in large-scale IoT-like networks by proposing novel scalability and reliability aware controller placement strategies. The second and third approaches tackle the knowledge sharing problem between the distributed controllers by suggesting adaptive multilevel consistency models following the concept of continuous Quorum-based consistency. These approaches have been validated using different SDN applications, developed from real-world SDN controllers.

This book studies the simulation of wireless networking in the domain of Intelligent Transportation Systems (ITS) involving aircraft, railway and vehicular communication. On this subject, particular focus is placed on effective communication channels, mobility modeling, multi-technology simulation and global ITS simulation frameworks. Networking Simulation for Intelligent Transportation Systems addresses the mixing of IEEE802.11p and LTE into a dedicated simulation environment as well as the links between ITS and IoT; aeronautical mobility and VHD Data Link (VDL) simulation; virtual co-simulation for railway communication and control-command; realistic channel simulation, mobility modeling and autonomic simulation for VANET and quality metrics for VANET. The authors intend for this book to be as useful as possible to the reader as they provide examples of methods and tools for running realistic and reliable simulations in the domain of communications for ITS.

Cyber threats are ever increasing. Adversaries are getting more sophisticated and cyber criminals are infiltrating companies in a variety of sectors. In today’s landscape, organizations need to acquire and develop effective security tools and mechanisms – not only to keep up with cyber criminals, but also to stay one step ahead. Cyber-Vigilance and Digital Trust develops cyber security disciplines that serve this double objective, dealing with cyber security threats in a unique way. Specifically, the book reviews recent advances in cyber threat intelligence, trust management and risk analysis, and gives a formal and technical approach based on a data tainting mechanism to avoid data leakage in Android systems