Essential reference providing best practice of LTE-A, VoLTE, and IoT Design/deployment/Performance and evolution towards 5G This book is a practical guide to the design, deployment, and performance of LTE-A, VoLTE/IMS and IoT. A comprehensive practical performance analysis for VoLTE is conducted based on field measurement results from live LTE networks. Also, it provides a comprehensive introduction to IoT and 5G evolutions. Practical aspects and best practice of LTE-A/IMS/VoLTE/IoT are presented. Practical aspects of LTE-Advanced features are presented. In addition, LTE/LTE-A network capacity dimensioning and analysis are demonstrated based on live LTE/LTE-A networks KPIs. A comprehensive foundation for 5G technologies is provided including massive MIMO, eMBB, URLLC, mMTC, NGCN and network slicing, cloudification, virtualization and SDN. Practical Guide to LTE-A, VoLTE and IoT: Paving the Way Towards 5G can be used as a practical comprehensive guide for best practices in LTE/LTE-A/VoLTE/IoT design, deployment, performance analysis and network architecture and dimensioning. It offers tutorial introduction on LTE-A/IoT/5G networks, enabling the reader to use this advanced book without the need to refer to more introductory texts. Offers a complete overview of LTE and LTE-A, IMS, VoLTE and IoT and 5G Introduces readers to IP Multimedia Subsystems (IMS)Performs a comprehensive evaluation of VoLTE/CSFB Provides LTE/LTE-A network capacity and dimensioning Examines IoT and 5G evolutions towards a super connected world Introduce 3GPP NB-IoT evolution for low power wide area (LPWA) network Provide a comprehensive introduction for 5G evolution including eMBB, URLLC, mMTC, network slicing, cloudification, virtualization, SDN and orchestration Practical Guide to LTE-A, VoLTE and IoT will appeal to all deployment and service engineers, network designers, and planning and optimization engineers working in mobile communications. Also, it is a practical guide for R&D and standardization experts to evolve the LTE/LTE-A, VoLTE and IoT towards 5G evolution.

Essential reference providing best practice of LTE-A, VoLTE, and IoT Design/deployment/Performance and evolution towards 5G This book is a practical guide to the design, deployment, and performance of LTE-A, VoLTE/IMS and IoT. A comprehensive practical performance analysis for VoLTE is conducted based on field measurement results from live LTE networks. Also, it provides a comprehensive introduction to IoT and 5G evolutions. Practical aspects and best practice of LTE-A/IMS/VoLTE/IoT are presented. Practical aspects of LTE-Advanced features are presented. In addition, LTE/LTE-A network capacity dimensioning and analysis are demonstrated based on live LTE/LTE-A networks KPIs. A comprehensive foundation for 5G technologies is provided including massive MIMO, eMBB, URLLC, mMTC, NGCN and network slicing, cloudification, virtualization and SDN. Practical Guide to LTE-A, VoLTE and IoT: Paving the Way Towards 5G can be used as a practical comprehensive guide for best practices in LTE/LTE-A/VoLTE/IoT design, deployment, performance analysis and network architecture and dimensioning. It offers tutorial introduction on LTE-A/IoT/5G networks, enabling the reader to use this advanced book without the need to refer to more introductory texts. Offers a complete overview of LTE and LTE-A, IMS, VoLTE and IoT and 5G Introduces readers to IP Multimedia Subsystems (IMS)Performs a comprehensive evaluation of VoLTE/CSFB Provides LTE/LTE-A network capacity and dimensioning Examines IoT and 5G evolutions towards a super connected world Introduce 3GPP NB-IoT evolution for low power wide area (LPWA) network Provide a comprehensive introduction for 5G evolution including eMBB, URLLC, mMTC, network slicing, cloudification, virtualization, SDN and orchestration Practical Guide to LTE-A, VoLTE and IoT will appeal to all deployment and service engineers, network designers, and planning and optimization engineers working in mobile communications. Also, it is a practical guide for R&D and standardization experts to evolve the LTE/LTE-A, VoLTE and IoT towards 5G evolution.

Understand a world transformed by wireless communication with this groundbreaking guide Since the advent of the internet, few technologies have proven more transformative than wireless communication. Never have we lived in a more comprehensively connected world, with the cloud and the coming sixth generation (6G) of wireless technology creating a vast and interconnected communications infrastructure. Global citizens of this newly interconnected reality are grappling like never before with its many challenges. Evolution of Wireless Communication Ecosystems from 1G to 6G provides readers with a history of wireless communication and a thorough overview of emerging frontiers. It traces wireless communication from the first generation through to the current fifth before surveying the current state of wireless technology and the ongoing research into 6G. The result is a book that understands wireless communication for the first time as an ecosystem, endlessly interconnected, growing, and boundlessly complex, but made intelligible by this highly readable introduction. Readers will also find: Detailed explanations of the journey starting from 1G to 6G Descriptions the infrastructure of 4G, 5G, and 6G systems, this all-connected communication ecosystem, the sub-components of this ecosystem, and the relationship among them Depictions of events seen in the capillaries of the communication echo system that show switching techniques, modulation, and multiplexing techniques Coverage of access techniques, protocols, the methods used in M2M and IoT connections at the endpoints, and security issues that show how they are an integral part of wireless communication infrastructure Evolution of Wireless Communication Ecosystems from 1G to 6G is an essential reference for wireless and telecommunications professionals, as well as researchers interested in 6G or other emerging wireless technologies.

This book presents an alternative and simplified approaches for the robust adaptive detection and beamforming in wireless communications. It adopts several systems models including DS/CDMA, OFDM/MIMO with antenna array, and general antenna arrays beamforming model. It presents and analyzes recently developed detection and beamforming algorithms with an emphasis on robustness. In addition, simplified and efficient robust adaptive detection and beamforming techniques are presented and compared with exiting techniques. Practical examples based on the above systems models are provided to exemplify the developed detectors and beamforming algorithms. Moreover, the developed techniques are implemented using MATLAB—and the relevant MATLAB scripts are provided to help the readers to develop and analyze the presented algorithms. em style="mso-bidi-font-style: normal;"Simplified Robust Adaptive Detection and Beamforming for Wireless Communications starts by introducing readers to adaptive signal processing and robust adaptive detection. It then goes on to cover Wireless Systems Models. The robust adaptive detectors and beamformers are implemented using the well-known algorithms including LMS, RLS, IQRD-RLS, RSD, BSCMA, CG, and SD. The robust detection and beamforming are derived based on the existing detectors/beamformers including MOE, PLIC, LCCMA, LCMV, MVDR, BSCMA, and MBER. The adopted cost functions include MSE, BER, CM, MV, and SINR/SNR.

In the post-COVID-19 healthcare landscape, the demand for smart healthcare solutions and precision medicine systems has grown significantly. To address these challenges, the book AI and IoT-Based Technologies for Precision Medicine provides a comprehensive resource for doctors, researchers, engineers, and students. By leveraging AI and IoT technologies, the book equips healthcare professionals with advanced tools and methodologies for predictive disease analysis, informed decision-making, and other aspects of precision medicine. This resource bridges the gap between theory and practice, exploring concepts like machine learning, deep learning, computer vision, AI-integrated applications, IoT-based technologies, healthcare data analytics, and biotechnology applications. Through this, the book empowers healthcare practitioners to pioneer innovative solutions that enhance efficiency, accuracy, and security in medical practices. AI and IoT-Based Technologies for Precision Medicine not only offer insights into the potential of AI-powered applications and IoT-equipped techniques in smart healthcare but also foster collaboration among healthcare scholars and professionals. This authoritative guide encourages knowledge sharing and collaboration to harness the transformative potential of AI and IoT, leading to revolutionary advancements in medical practices and healthcare services. With this book as a guide, readers can navigate the evolving landscape of high-tech medicine, taking confident steps toward a cutting-edge and precise medical ecosystem.

This first volume in the Mosharaka for Research and Studies International Conference Proceedings series (P-MIC) contains peer-reviewed papers presented at the 1st International Congress on Engineering Technologies (EngiTek 2020). This event was held remotely on 16-18 June 2020, and hosted by the Faculty of Engineering, Jordan University of Science & Technology (Irbid, Jordan). The conference represented a major forum for professors, students, and professionals from all over the world to present their latest research results, and to exchange new ideas and practical experiences in the most cutting-edge areas of the field of engineering technologies. Topics covered include electrical engineering, computer science and electronics.

Voice over LTE (Long Term Evolution) presents the mechanisms put in place in 4G mobile networks for the transportation of IP packets containing voice data and telephone signaling, as well as the technologies used to provide a telephone service in the IMS (IP Multimedia Sub-system) network. Despite the difficulty connected to the handover of the 4G network to the 2G/3G network, a telephone communication will not be established on the 4G network. This book analyzes the technologies that have been put in place, such as CSFB (Circuit Service FallBack), an interim solution that enables a mobile connected to the 4G network to receive an alert transmitted by the 2G/3G network. The book also goes on to develop the SIP (Session Information Protocol) on which the telephone signaling transferred by the 4G network is based, the IMS network that provides the service and defines the routing, the SRVCC (Single Radio Voice Call Continuity) mechanism that maintains communication and the TAS (Telephony Application Server) that supplies supplementary services. Contents 1. The EPS Network. 2. The LTE Interface. 3. The CSFB Function. 4. SIP and SDP Protocols. 5. The IMS Network. 6. Telephone Services. 7. The SRVCC Function. About the Authors André Perez is a consultant and teacher in networks and telecommunications. He works with industrialists and operators regarding architecture studies and leads training on the 4G and IMS networks for NEXCOM.

A comprehensive resource containing the operating principles and key insights of LTE networks performance optimization LTE Optimization Engineering Handbook is a comprehensive reference that describes the most current technologies and optimization principles for LTE networks. The text offers an introduction to the basics of LTE architecture, services and technologies and includes details on the key principles and methods of LTE optimization and its parameters. In addition, the author clarifies different optimization aspects such as wireless channel optimization, data optimization, CSFB, VoLTE, and video optimization. With the ubiquitous usage and increased development of mobile networks and smart devices, LTE is the 4G network that will be the only mainstream technology in the current mobile communication system and in the near future. Designed for use by researchers, engineers and operators working in the field of mobile communications and written by a noted engineer and experienced researcher, the LTE Optimization Engineering Handbook provides an essential guide that: Discusses the latest optimization engineering technologies of LTE networks and explores their implementation Features the latest and most industrially relevant applications, such as VoLTE and HetNets Includes a wealth of detailed scenarios and optimization real-world case studies Professionals in the field will find the LTE Optimization Engineering Handbook to be their go-to reference that includes a thorough and complete examination of LTE networks, their operating principles, and the most current information to performance optimization.

This book provides an insight into the key practical aspects and best practice of 4G-LTE network design, performance, and deployment Design, Deployment and Performance of 4G-LTE Networks addresses the key practical aspects and best practice of 4G networks design, performance, and deployment. In addition, the book focuses on the end-to-end aspects of the LTE network architecture and different deployment scenarios of commercial LTE networks. It describes the air interface of LTE focusing on the access stratum protocol layers: PDCP, RLC, MAC, and Physical Layer. The air interface described in this book covers the concepts of LTE frame structure, downlink and uplink scheduling, and detailed illustrations of the data flow across the protocol layers. It describes the details of the optimization process including performance measurements and troubleshooting mechanisms in addition to demonstrating common issues and case studies based on actual field results. The book provides detailed performance analysis of key features/enhancements such as C-DRX for Smartphones battery saving, CSFB solution to support voice calls with LTE, and MIMO techniques. The book presents analysis of LTE coverage and link budgets alongside a detailed comparative analysis with HSPA+. Practical link budget examples are provided for data and VoLTE scenarios. Furthermore, the reader is provided with a detailed explanation of capacity dimensioning of the LTE systems. The LTE capacity analysis in this book is presented in a comparative manner with reference to the HSPA+ network to benchmark the LTE network capacity. The book describes the voice options for LTE including VoIP protocol stack, IMS Single Radio Voice Call Continuity (SRVCC). In addition, key VoLTE features are presented: Semi-persistent scheduling (SPS), TTI bundling, Quality of Service (QoS), VoIP with C-DRX, Robust Header Compression (RoHC), and VoLTE Vocoders and De-Jitter buffer. The book describes several LTE and LTE-A advanced features in the evolution from Release 8 to 10 including SON, eICIC, CA, CoMP, HetNet, Enhanced MIMO, Relays, and LBS. This book can be used as a reference for best practices in LTE networks design and deployment, performance analysis, and evolution strategy. Conveys the theoretical background of 4G-LTE networks Presents key aspects and best practice of 4G-LTE networks design and deployment Includes a realistic roadmap for evolution of deployed 3G/4G networks Addresses the practical aspects for designing and deploying commercial LTE networks. Analyzes LTE coverage and link budgets, including a detailed comparative analysis with HSPA+. References the best practices in LTE networks design and deployment, performance analysis, and evolution strategy Covers infrastructure-sharing scenarios for CAPEX and OPEX saving. Provides key practical aspects for supporting voice services over LTE, Written for all 4G engineers/designers working in networks design for operators, network deployment engineers, R&D engineers, telecom consulting firms, measurement/performance tools firms, deployment subcontractors, senior undergraduate students and graduate students interested in understanding the practical aspects of 4G-LTE networks as part of their classes, research, or projects.

A comprehensive resource to the latest developments of system enhancement techniques of Femtocells, power management, interference mitigation and antenna design LTE Communications and Networks fills a gap in the literature to offer a comprehensive review of the most current developments of LTE Femtocells and antennas and explores their future growth. With contributions from a group of experts that represent the fields of wireless communications and mobile communications, signal processing and antenna design, this text identifies technical challenges and presents recent results related to the development, integration and enhancement of LTE systems in portable devices. The authors examine topics such as application of cognitive radio with efficient sensing mechanisms, interference mitigation and power management schemes for the LTE systems. They also provide a comprehensive account of design challenges and approaches, performance enhancement techniques and effects of user’s presence on the LTE antennas. LTE Communications and Networks also highlights the promising technologies of multiband, multimode and reconfigurable antennas for efficient design of portable LTE devices. Designed to be a practical resource, this text: Explores the interference mitigation, power control and spectrum management in LTE Femtocells and related issues Contains information on the design challenges, different approaches, performance enhancement and application case scenarios for the LTE antennas Covers the most recent developments of system enhancement techniques in terms of Femtocells, power management, interference mitigation and antenna design Includes contributions from leading experts in the field Written for industry professionals and researchers, LTE Communications and Networks is a groundbreaking book that presents a comprehensive treatment to the LTE systems in the context of Femtocells and antenna design and covers the wide range of issues related to the topic.