This highly detailed handbook is a resource for those entering the field of stress analysis and instrumentation. The authors were brought together to provide their expert experience and have presented many practical solutions.

Starts with a history of generic pipeline coating types and technical information about use. Practical information about selection and evaluation for each type of coating system is provided. Discussion of how coatings work with cathodic protection, CP shielding by coatings and other related issues with the various coating systems related to CP.

Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over

The first version of this book, Packaging Materials and Containers was published in 1967 and was revised extensively ten years later under the title The Packaging Media. Some thirty or so authors were involved in producing the initial texts for these books, and I must acknowledge their material, much of which is still valid. It is now thirteen years since The Packaging Media-high time to take stock and incorporate the considerable advances in materials, forms, techniques and machinery that have taken place. In 1977, wherever possible, we asked the original authors to carry out the revisions, but retirements and job changes have now eliminated over twenty of the original authors. We have therefore appointed an Editorial Board to advise on this more extensive revision, and I wish to thank them for their detailed and helpful assistance: Dr C. J. Mackson and Professor Y. Dagel for general comments and guidance on the overall plan and, in particular, the Introduction (chapter 1); Graham Gordon and Harri Mostyn for assistance with much of Part D on Distribution Packages, and Dennis Hine and Susan Selke for their work in respect of paperboard and plastics retail packaging, respectively. A major contribution was made by the seventh member of the Editorial Board, David Osborne, who advised in the area of glass.

Fluorinated Coatings and Finishes Handbook: The Definitive User's Guide, Second Edition, addresses important, frequently posed questions by end-user design engineers, coaters, and coatings suppliers on fluorinated coatings and finishes, thus enabling them to achieve superior product qualities and shorter product and process development times. The book provides broad coverage of these fluorinated polymer coatings, including the best known PTFE, polytetrafluoroethylene, first trademarked as Teflon® and ePTFE (GoreTex®). Their inherent qualities of low surface tension, non-stick, low friction, high melting point, and chemical inertness make fluoropolymer coatings widely desirable across thousands of industrial and consumer applications, but these properties also make it difficult to convert fluoropolymers to coatings that have sufficient adhesion to the substrate to be protected. In this book, readers learn how fluoropolymer coatings are used and made, about their pigments and fillers, binders, dispersion processes, additives, and solvents. The book includes substrate preparation, coating properties, baking and curing processes, performance tests, applications, and health and safety. Provides a practical handbook that covers the theory and practice of fluorinated coatings, including the structure and properties of binders and how to get a non-stick coating to stick to the substrate Covers liquid and power fluorocoatings, their applications methods, curing and baking processes, and their commercial end uses Presents detailed discussions of testing methods related to fluorocoatings, common coating defects, how they form, how to eliminate them, and the health and safety aspects of using and applying fluorocoatings Includes substrate preparation, coating properties, baking and curing processes, performance tests, applications, and health and safety

Electrocorrosion and Protection of Metals, Second Edition, compiles theoretical and practical information, outlines the specific problem, and presents the available solutions related to corrosion by external currents. Basic data on the behavior of different metals under the attack of anodic, cathodic, direct and alternating currents is considered, as are the problems of electrocorrosion—from the identification of corrosion damage and detection of the external current sources, to the selection of optimal means and methods of mitigation, monitoring and protection of different metallic structures and structures of reinforced concrete. This book includes comprehensive information and provides necessary links to more detailed, original sources, thus enabling users to solve either general or particular problems of electrocorrosion and protection of metals. - Provides a comprehensive listing of all possible sources of external currents which attack metallic equipment, piping and other metallic structures - Outlines the sources of corrosion damage for fast and reliable analysis - Provides technical examples and case studies related to electrocorrosion - Presents new data and methods of electrocorrosion control and monitoring using computerized techniques and technologies - Includes original methods—only considered in this publication—of metals protection against electrocorrosion