The first version of this book, Packaging Materials and Containers was published in 1967 and was revised extensively ten years later under the title The Packaging Media. Some thirty or so authors were involved in producing the initial texts for these books, and I must acknowledge their material, much of which is still valid. It is now thirteen years since The Packaging Media-high time to take stock and incorporate the considerable advances in materials, forms, techniques and machinery that have taken place. In 1977, wherever possible, we asked the original authors to carry out the revisions, but retirements and job changes have now eliminated over twenty of the original authors. We have therefore appointed an Editorial Board to advise on this more extensive revision, and I wish to thank them for their detailed and helpful assistance: Dr C. J. Mackson and Professor Y. Dagel for general comments and guidance on the overall plan and, in particular, the Introduction (chapter 1); Graham Gordon and Harri Mostyn for assistance with much of Part D on Distribution Packages, and Dennis Hine and Susan Selke for their work in respect of paperboard and plastics retail packaging, respectively. A major contribution was made by the seventh member of the Editorial Board, David Osborne, who advised in the area of glass.

The definitive industry reference on the paper and paperboard packaging sector. Now in a fully revised and updated second edition, this book discusses all the main types of packaging based on paper and paperboard. It considers the raw materials, the manufacture of paper and paperboard, and the basic properties and features on which packaging made from these materials depends for its appearance and performance. The manufacture of twelve types of paper- and paperboard-based packaging is described, together with their end-use applications and the packaging machinery involved. The importance of pack design is stressed, as well as how these materials offer packaging designers opportunities for imaginative and innovative design solutions. Environmental factors, including resource sustainability, societal and waste management issues are addressed in a dedicated chapter. The book is directed at readers based in companies which manufacture packaging grades of paper and paperboard, companies involved in the design, printing and production of packaging, and companies which manufacture inks, coatings, adhesives and packaging machinery. It will be essential reading for students of packaging technology and technologists working in food manufacturing who are users of paper and paperboard packaging products. Praise for the First Edition ‘This book is a valuable addition to the library of any forward-looking company by providing in-depth coverage of all aspects of packaging which involve the most ecologically acceptable material, namely paper and paperboard.’—International Journal of Dairy Technology ‘...a welcome contribution to a field where coverage was previously limited to subject-specific books... or to single chapters in textbooks on broader aspects of packaging technology.’—Packaging Technology and Science

This is the second edition of a successful title first published in 1983 and now therefore a decade out of date. The authors consider the development of the right package for a particular food in a particular market, from the point of view of the food technologist, the packaging engineer and those concerned with marketing. While the original format has been retained, the contents have been thoroughly revised to take account of the considerable advances made in recent years in the techniques of food processing, packaging and distribution. While efficient packaging is even more a necessity for every kind of food, whether fresh or processed, and is an essential link between the food producer and the consumer, the emphasis on its several functions has changed. Its basic function is to identify the product and ensure that it travels safely through the distribution system to the consumer. Packaging designed and constructed solely for this purpose adds little or nothing to the value of the product, merely preserving farm or processor freshness or preventing physical damage, and cost effectiveness is the sole criterion for success. If, however, the packaging facilitates the use of the product, is reusable or has an after-use, some extra value can be added to justify the extra cost and promote sales. Many examples of packaging providing such extra value can be cited over the last decade.

This thoroughly revised and updated three volume set continues to be the standard reference in the field, providing the latest in microelectronics design methods, modeling tools, simulation techniques, and manufacturing procedures. Unlike reference books that focus only on a few aspects of microelectronics packaging, these outstanding volumes discuss state-of-the-art packages that meet the power, cooling, protection, and interconnection requirements of increasingly dense and fast microcircuitry. Providing an excellent balance of theory and practical applications, this dynamic compilation features step-by-step examples and vital technical data, simplifying each phase of package design and production. In addition, the volumes contain over 2000 references, 900 figures, and 250 tables. Part I: Technology Drivers covers the driving force of microelectronics packaging - electrical, thermal, and reliability. It introduces the technology developer to aspects of manufacturing that must be considered during product development. Part II: Semiconductor Packaging discusses the interconnection of the IC chip to the first level of packaging and all first level packages. Electrical test, sealing, and encapsulation technologies are also covered in detail. Part III: Subsystem Packaging explores board level packaging as well as connectors, cables, and optical packaging.

The essential packaging design resource, now with more patterns than ever! For more than two decades, The Packaging Designer's Book of Patterns has served as an indispensable source of ideas and practical solutions for a wide range of packaging design challenges. This Fourth Edition offers more than 600 patterns and structural designs—more than any other book—all drawn to scale and ready to be traced, scanned, or photocopied. Online access to the patterns in digital format allows readers to immediately use any pattern in the most common software programs, including Adobe Photoshop and Illustrator. Every pattern has been test-constructed to verify dimensional accuracy. The patterns can be scaled to suit particular specifications—many are easily converted to alternate uses—and most details are easily customizable. Features of this Fourth Edition include: More than 55 new patterns added to this edition—over 600 patterns in all A broad array of patterns for folding cartons, trays, tubes, sleeves, wraps, folders, rigid boxes, corrugated containers, and point-of-purchase displays Proven, scalable patterns that save hours of research and trial-and-error design Packaging patterns that are based on the use of 100% recyclable materials Includes access to a password protected website that contains all 600+ patterns in digital form for immediate use Comprehensive and up to date, The Packaging Designer's Book of Patterns, Fourth Edition enables packaging, display, and graphic designers and students to achieve project-specific design objectives with precision and confidence.

Electronics has become the largest industry, surpassing agriculture, auto, and heavy metal industries. It has become the industry of choice for a country to prosper, already having given rise to the phenomenal prosperity of Japan, Korea, Singapore, Hong Kong, and Ireland among others. At the current growth rate, total worldwide semiconductor sales will reach $300B by the year 2000. The key electronic technologies responsible for the growth of the industry include semiconductors, the packaging of semiconductors for systems use in auto, telecom, computer, consumer, aerospace, and medical industries, displays, magnetic, and optical storage as well as software and system technologies. There has been a paradigm shift, however, in these technologies, from mainframe and supercomputer applications at any cost, to consumer applications at approximately one-tenth the cost and size. Personal computers are a good example, going from $500IMIP when products were first introduced in 1981, to a projected $IIMIP within 10 years. Thin, light portable, user friendly and very low-cost are, therefore, the attributes of tomorrow's computing and communications systems. Electronic packaging is defined as interconnection, powering, cool ing, and protecting semiconductor chips for reliable systems. It is a key enabling technology achieving the requirements for reducing the size and cost at the system and product level.

As was the case with Charles Ross's Packaging of Pharmaceuticals published by the UK Institute of Packaging in 1975 it is assumed that the reader of this book already has a broad understanding of the basics of packaging. If not the Packaging Users Handbook and the Handbook of Food Packaging are recommended. The packaging needs of pharmaceuticals are different in degree only from those of other perishable products such as processed foods. Because the required action of a medication can be nullified by any deterioration in its active principles the protection required from its packaging is at least an order of magnitude greater than that needed by foods for example. Functional efficiency is therefore of prime importance. Conversely the need for the packaging to 'sell' the medication is much less, hence the graphics required need only provide the right 'image' for the product when presented for use in hospital or surgery. Even when on sale at the pharmacy the 'appeal' required is that of providing hygiene and confidence more than anything else. Thus, the textual requirements are paramount including traceability (batch numbers, date-coding etc) in case of recall; while striking appearance to attract customer attention is in lower key. And with the increase in malicious tampering nowadays recall is more frequent.

Now in a fully revised and updated second edition, this volume provides a contemporary overview of food processing/packaging technologies. It acquaints the reader with food preservation processes, shelf life and logistical considerations, as well as packaging materials, machines and processes necessary for a wide range of packaging presentations. The new edition addresses environmental and sustainability concerns, and also examines applications of emerging technologies such as RFID and nanotechnology. It is directed at packaging technologists, those involved in the design and development of packaging, users of packaging in food companies and those who specify or purchase packaging. Key Features: An up-to-date and comprehensive handbook on the most important sector of packaging technology Links methods of food preservation to the packaging requirements of the common types of food and the available food packages Covers all the key packaging materials - glass, plastics and paperboard Fully revised second edition now covers sustainability, nanotechnology and RFID

Electronics has become the largest industry, surpassing agriCUlture, auto. and heavy metal industries. It has become the industry of choice for a country to prosper, already having given rise to the phenomenal prosperity of Japan. Korea. Singapore. Hong Kong. and Ireland among others. At the current growth rate, total worldwide semiconductor sales will reach $300B by the year 2000. The key electronic technologies responsible for the growth of the industry include semiconductors. the packaging of semiconductors for systems use in auto, telecom, computer, consumer, aerospace, and medical industries. displays. magnetic, and optical storage as well as software and system technologies. There has been a paradigm shift, however, in these technologies. from mainframe and supercomputer applications at any cost. to consumer applications at approximately one-tenth the cost and size. Personal computers are a good example. going from $500IMIP when products were first introduced in 1981, to a projected $lIMIP within 10 years. Thin. light portable. user friendly and very low-cost are. therefore. the attributes of tomorrow's computing and communications systems. Electronic packaging is defined as interconnection. powering, cool ing, and protecting semiconductor chips for reliable systems. It is a key enabling technology achieving the requirements for reducing the size and cost at the system and product level.

Finally, a comprehensive book about packaging machinery. The Packaging Machinery Handbook is the first book covering the range of packaging machinery in common use. It includes chapters on filling, capping, labeling, cartoning, inspecting and more. The chapter on packaging line design provides a framework for developing a new packaging line from initial idea to production. More than 120 illustrations allow readers to see inside the machines and what makes them tick. A companion website at www.packmachbook.com includes links to hundreds of videos of these machines in action. The book is designed for the newcomer who wants to learn about machinery, for the package designer who needs to understand how their package will be produced and for the seasoned professional who wants a handy reference. What the experts are saying: Experience is the best teacher. But if you can't wait 10 years and don't want to learn the hard way, read John Henry's Packaging Machinery Handbook Through a fast-moving conversational writing style - from big-picture "here's why it's done" to nitty-gritty "here's how it's done" - John transfers his extensive packaging knowledge nearly as effortlessly as a Vulcan mind-meld. Lisa McTigue Pierce, packaging journalist since 1982 From his wealth of practical experience, John has put together a great resource for anyone who is thinking about buying a piece of packaging machinery or who is engaged in putting together a packaging operation. It will help even the most seasoned veterans avoid some common pitfalls. Larry Luciano, President, Luciano Packaging Technology John Henry's Packaging Machinery Handbook will be the definitive work he day it is published. This is the book we in the field will reach for when we need insight into packaging machinery. His technical integrity gives us a book of great utility.This book is first rate and badly needed. Bravo to John Henry! Iver Phallen, President, Oden Corporation