This text provides a comprehensive introduction to infrared-transparent materials for windows and domes that must withstand harsh environmental conditions, such as high-speed flight or high temperature process monitoring. Introductory material in each section makes the book suitable for anyone with a background in science or engineering.

This text provides a comprehensive introduction to infrared-transparent materials for windows and domes that must withstand harsh environmental conditions, such as high-speed flight or high temperature process monitoring. Introductory material in each section makes the book readable by anyone with a background in science or engineering. The current volume builds on its predecessor, Infrared Window and Dome Materials, published in 1992 as part of the SPIE Tutorial Texts series. The new monograph incorporates seven years of practical and theoretical developments in the field of infrared windows, along with additional reference information.

This book is a comprehensive introduction on infrared anti-transparent materials and their applications in anti-reflective and protective coatings. Optical, mechanical and thermal properties and preparations of various kinds of films, such as amorphous diamond films, germanium carbide films, boron phosphide films, alumina films and yttrium oxide film are discussed in detail making it suitable for material scientists and industrial engineers.

Opto-Mechanical Systems Design, Fourth Edition is different in many ways from its three earlier editions: coauthor Daniel Vukobratovich has brought his broad expertise in materials, opto-mechanical design, analysis of optical instruments, large mirrors, and structures to bear throughout the book; Jan Nijenhuis has contributed a comprehensive new chapter on kinematics and applications of flexures; and several other experts in special aspects of opto-mechanics have contributed portions of other chapters. An expanded feature—a total of 110 worked-out design examples—has been added to several chapters to show how the theory, equations, and analytical methods can be applied by the reader. Finally, the extended text, new illustrations, new tables of data, and new references have warranted publication of this work in the form of two separate but closely entwined volumes. The first volume, Design and Analysis of Opto-Mechanical Assemblies, addresses topics pertaining primarily to optics smaller than 50 cm aperture. It summarizes the opto-mechanical design process, considers pertinent environmental influences, lists and updates key parameters for materials, illustrates numerous ways for mounting individual and multiple lenses, shows typical ways to design and mount windows and similar components, details designs for many types of prisms and techniques for mounting them, suggests designs and mounting techniques for small mirrors, explains the benefits of kinematic design and uses of flexures, describes how to analyze various types of opto-mechanical interfaces, demonstrates how the strength of glass can be determined and how to estimate stress generated in optics, and explains how changing temperature affects opto-mechanical assemblies. The second volume, Design and Analysis of Large Mirrors and Structures, concentrates on the design and mounting of significantly larger optics and their structures, including a new and important topic: detailed consideration of factors affecting large mirror performance. The book details how to design and fabricate very large single-substrate, segmented, and lightweight mirrors; describes mountings for large mirrors with their optical axes in vertical, horizontal, and variable orientations; indicates how metal and composite mirrors differ from ones made of glass; explains key design aspects of optical instrument structural design; and takes a look at an emerging technology—the evolution and applications of silicon and silicon carbide in mirrors and other types of components for optical applications.

Entirely updated to cover the latest technology, this Second Edition gives optical designers and optomechanical engineers a thorough understanding of the principal ways in which optical components - lenses, windows, filters, shells, domes, prisms, and mirrors of all sizes - are mounted in optical instruments.Along with new information on tolerancing, sealing considerations, elastomeric mountings, alignment, stress estimation, and temperature control, two new chapters address the mounting of metallic mirrors and the alignment of reflective and catadioptric systems.The updated accompanying CD-ROM offers a convenient spreadsheet of the many equations that are helpful in solving problems encountered when mounting optics in instruments.

This is the only global roadmap that identifies the technical and manufacturing challenges associated with the development and expansion of commercial markets for ceramics and glass. Featuring presentations by industry leaders at the 1st International Congress on Ceramics (ICC) held in 2006, it suggests positive, proactive ways to address these challenges. The ICC Global Roadmap contains the following content: 1) Summary papers prepared by the invited speakers before the meeting 2) A detailed account of the presentation of each invited speaker written by an editor who attends the presentation 3) A summary account and future recommendations for the industry on each topic covered written by the board and the president of this meeting, Dr. Stephen Freiman (National Institutes of Standards and Technology) 4) The CDRom accompanying the book contains all of the above as well as pdfs of the presentations for non-invited speakers, including posters presented and discussed.

A typical optical system is composed of three basic components: a source, a detector, and a medium in which the optical energy propagates. Many textbooks cover sources and detectors, but very few cover propagation in a comprehensive way, incorporating the latest progress in theory and experiment concerning the propagating medium. This book fulfills that need. It is the first comprehensive and self-contained book on this topic. It is useful reference book for researchers, and a textbook for courses like Laser Light Propagation, Solid State Optics, and Optical Propagation in the Atmosphere.

Opto-Mechanical Systems Design, Fourth Edition is different in many ways from its three earlier editions: coauthor Daniel Vukobratovich has brought his broad expertise in materials, opto-mechanical design, analysis of optical instruments, large mirrors, and structures to bear throughout the book; Jan Nijenhuis has contributed a comprehensive new chapter on kinematics and applications of flexures; and several other experts in special aspects of opto-mechanics have contributed portions of other chapters. An expanded feature—a total of 110 worked-out design examples—has been added to several chapters to show how the theory, equations, and analytical methods can be applied by the reader. Finally, the extended text, new illustrations, new tables of data, and new references have warranted publication of this work in the form of two separate but closely entwined volumes. This first volume, Design and Analysis of Opto-Mechanical Assemblies, addresses topics pertaining primarily to optics smaller than 50 cm aperture. It summarizes the opto-mechanical design process, considers pertinent environmental influences, lists and updates key parameters for materials, illustrates numerous ways for mounting individual and multiple lenses, shows typical ways to design and mount windows and similar components, details designs for many types of prisms and techniques for mounting them, suggests designs and mounting techniques for small mirrors, explains the benefits of kinematic design and uses of flexures, describes how to analyze various types of opto-mechanical interfaces, demonstrates how the strength of glass can be determined and how to estimate stress generated in optics, and explains how changing temperature affects opto-mechanical assemblies.

This book provides a complete overview of the theory, design, and applications of unmanned aerial vehicles. It covers the basics, including definitions, attributes, manned vs. unmanned, design considerations, life cycle costs, architecture, components, air vehicle, payload, communications, data link, and ground control stations. Chapters cover types and civilian roles, sensors and characteristics, alternative power, communications and data links, conceptual design, human machine interface, sense and avoid systems, civil airspace issues and integration efforts, navigation, autonomous control, swarming, and future capabilities.