This book describes improvements in the iron and steel making process in the past few decades. It also presents new and improved solutions to producing high quality products with low greenhouse emissions. In addition, it examines legislative regulations regarding greenhouse emissions all around the world and how to control these dangerous emissions in iron and steel making plants.

Steel is a critical material in our societies and will remain an important one for a long time into the future. In the last two decades, the world steel industry has gone through drastic changes and this is predicted to continue in the future. The Asian countries (e.g. China, India) have been dominant in the production of steel creating global over-capacity, while the steel industry in the developed countries have made tremendous efforts to reinforce its global leadership in process technology and product development, and remain sustainable and competitive. The global steel industry is also facing various grand challenges in strict environmental regulation, new energy and materials sources, and ever-increasing customer requirements for high quality steel products, which has been addressed accordingly by the global iron and steel community. This Special Issue, “Ironmaking and Steelmaking”, released by the journal Metals, published 33 high quality articles from the international iron and steel community, covering the state-of-the-art of the ironmaking and steelmaking processes. This includes fundamental understanding, experimental investigation, pilot plant trials, industrial applications and big data utilization in the improvement and optimization of existing processes, and research and development in transformative technologies. It is hoped that the creation of this special issue as a scientific platform will help drive the iron and steel community to build a sustainable steel industry.

This book presents the fundamentals of iron and steel making, including the physical chemistry, thermodynamics and key concepts, while also discussing associated problems and solutions. It guides the reader through the production process from start to finish, covers the raw materials, and addresses the types of processes and reactions involved in both conventional and alternative methods. Though primarily intended as a textbook for students of metallurgical engineering, the book will also prove a useful reference for professionals and researchers working in this area.

​This book describes the available technologies that can be employed to reduce energy consumption and greenhouse emissions in the steel- and ironmaking industries. Ironmaking and steelmaking are some of the largest emitters of carbon dioxide (over 2Gt per year) and have some of the highest energy demand (25 EJ per year) among all industries; to help mitigate this problem, the book examines how changes can be made in energy efficiency, including energy consumption optimization, online monitoring, and energy audits. Due to negligible regulations and unparalleled growth in these industries during the past 15-20 years, knowledge of best practices and innovative technologies for greenhouse gas remediation is paramount, and something this book addresses. Presents the most recent technological solutions in productivity analyses and dangerous emissions control and reduction in steelmaking plants; Examines the energy saving and emissions abatement efficiency for potential solutions to emission control and reduction in steelmaking plants; Discusses the application of the results of research conducted over the last ten years at universities, research centers, and industrial institutions.

This authoritative account covers the entire spectrum from iron ore to finished steel. It begins by tracing the history of iron and steel production, right from the earlier days to today’s world of oxygen steelmaking, electric steelmaking, secondary steelmaking and continuous casting. The physicochemical fundamental concepts of chemical equilibrium, activity-composition relationships, and structure-properties of molten metals are introduced before going into details of transport phenomena, i.e. kinetics, mixing and mass transfer in ironmaking and steelmaking pro-cesses. Particular emphasis is laid on the understanding of the fundamental principles of the processes and their application to the optimisation of actual processes. Modern developments in blast furnaces, including modelling and process control are discussed along with an introduction to the alternative methods of ironmaking. In the area of steelmaking, BOF plant practice including pre-treatment of hot metal, metallurgical features of oxygen steelmaking processes, and their control form part of the book. It also covers basic open hearth, electric arc furnace and stainless steelmaking, before discussing the area of casting of liquid steel—ingot casting, continuous casting and near net shape casting. The book concludes with a chapter on the status of the ironmaking and steelmaking in India. In line with the application of theoretical principles, several worked-out examples dealing with fundamental principles as applied to actual plant situations are presented. The book is primarily intended for undergraduate and postgraduate students of metallurgical engineering. It would also be immensely useful to researchers in the area of iron and steel.

This book provides basic information covering every aspect of iron and steel production and was originally a textbook for Soviet vocational schools, as well as a practical aid for workers engaged in the field.

This book promotes understanding of the raw material selection, refractory design, tailor-made refractory developments, refractory properties, and methods of application. It provides a complete analysis of modern iron and steel refractories. It describes the daily demands on modern refractories and describes how these needs can be addressed or improved upon to help achieve the cleanest and largest yields of iron and steel. The text contains end-of-chapter summaries to help reinforce difficult concepts. It also includes problems at the end of chapters to confirm the reader's understanding of topics such as hoop stress modeling in steel ladle and vessels, establishment of thermal gradient modeling , refractory corrosion dynamics, calculation of Blast furnace trough dimension based on thermal modeling, to name a few. Led by editors with backgrounds in both academia and industry, this book can be used in college courses, as a reference for industry professionals, and as an introduction to the technology for those making the transition to industry. Stands as a comprehensive introduction to the science and technology of modern steel and iron-making refractories that examines the processes, construction, and potential improvement of refractory performance and sustainability; Serves as a versatile resource appropriate for all levels, from the student to industry novices to professionals; Reinforces difficult-to-grasp concepts with end-of-chapter summaries; Maximizes reader understanding of key topics, such as refractory selection for steel ladle and vessels, and their corrosion dynamics, with real life problems.

Steel Making is designed to give students a strong grounding in the theory and state-of-the-art practice of production of steels. The book is primarily focused to meet the needs of undergraduate metallurgical students and candidates for associate membership examinations of professional bodies (AMIIM, AMIE). Besides, for all engineering professionals working in steel plants who need to understand the basic principles of steel making, the text provides a sound introduction to the subject. Beginning with a brief introduction to the historical perspective and current status of steel making together with the reasons for obsolescence of Bessemer converter and open hearth processes, the book moves on to : • elaborate the physicochemical principles involved in steel making • explain the operational principles and practices of the modern processes of primary steel making (LD converter, Q-BOP process, and electric furnace process) • provide a summary of the developments in secondary refining of steels • discuss principles and practices of ingot casting and continuous casting of steels • emphasize an increasing need to protect our environment and utilize waste energy • explain transport processes, simulation, and modelling relevant to the developments in steel technology. The book provides considerable information in an easily assimilable form and makes an ideal introduction to the complex subject of steel technology.

The Iron Blast Furnace: Theory and Practice presents theoretical, experimental, and operational evidence about the iron blast furnace as well as a mathematical description of its operation. This book includes a set of equations that accurately describe stoichiometric and enthalpy balances for the process and which are consistent with observed temperatures and compositions in the furnace stack. These equations, which have been devised on the basis of the Rist approach, show the effects of altering any blast-furnace variable on the other operating requirements of the process. This monograph is comprised of 14 chapters and begins with a brief description of the blast-furnace process. The next chapter takes a look inside the furnace, paying particular attention to its behavior in front of the tuyères and the kinetics of the coke gasification reaction. The reader is then introduced to the thermodynamics and stoichiometry of the blast-furnace process; enthalpy balance for the bottom segment of the furnace; the effects of tuyères injectants on blast-furnace operations; and blast-furnace optimization by linear programming. A number of important variables covered by the equations are discussed, including hydrocarbon injection at the tuyères, oxygen enrichment of the blast, moisture, limestone decomposition, coke reactivity, and metalloid reduction. The effects of many of these variables are illustrated numerically in the text while others are demonstrated in sets of problems that follow each chapter. This text will be a valuable resource for metallurgists and materials scientists.

This book covers various metallurgical topics, viz. roasting of sulfide minerals, matte smelting, slag, reduction of oxides and reduction smelting, interfacial phenomena, steelmaking, secondary steelmaking, role of halides in extraction of metals, refining, hydrometallurgy and electrometallurgy. Each chapter is illustrated with appropriate examples of applications of the technique in extraction of some common, reactive, rare or refractory metal together with worked out problems explaining the principle of the operation.