This introductory text provides coverage of both static and dynamic fields. There are references to computer visualisation (Mathcad) and computation throughout the text, and there are Mathcad electronic books available free on the Internet to help students visualise electromagnetic fields. Important equations are highlighted in the text, and there are examples and problems throughout, with answers to the problems at the back of the book.

A Landmark text thoroughly updated, including a new CD As digital devices continue to be produced at increasingly lowercosts and with higher speeds, the need for effectiveelectromagnetic compatibility (EMC) design practices has becomemore critical than ever to avoid unnecessary costs in bringingproducts into compliance with governmental regulations. The SecondEdition of this landmark text has been thoroughly updated andrevised to reflect these major developments that affect bothacademia and the electronics industry. Readers familiar with theFirst Edition will find much new material, including: * Latest U.S. and international regulatory requirements * PSpice used throughout the textbook to simulate EMC analysissolutions * Methods of designing for Signal Integrity * Fortran programs for the simulation of Crosstalk supplied on aCD * OrCAD(r) PSpice(r) Release 10.0 and Version 8 Demo Editionsoftware supplied on a CD * The final chapter on System Design for EMC completelyrewritten * The chapter on Crosstalk rewritten to simplify themathematics Detailed, worked-out examples are now included throughout the text.In addition, review exercises are now included following thediscussion of each important topic to help readers assess theirgrasp of the material. Several appendices are new to this editionincluding Phasor Analysis of Electric Circuits, The ElectromagneticField Equations and Waves, Computer Codes for Calculating thePer-Unit-Length Parameters and Crosstalk of MulticonductorTransmission Lines, and a SPICE (PSPICE) tutorial. Now thoroughly updated, the Second Edition of Introduction toElectromagnetic Compatibility remains the textbook of choice foruniversity/college EMC courses as well as a reference for EMCdesign engineers. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment.

Praise for Noise Reduction Techniques IN electronic systems "Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others." —EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications to the design of analog and digital circuits in computer, home entertainment, medical, telecom, industrial process control, and automotive equipment, as well as military and aerospace systems. While maintaining and updating the core information—such as cabling, grounding, filtering, shielding, digital circuit grounding and layout, and ESD—that made the previous book such a wide success, this new book includes additional coverage of: Equipment/systems grounding Switching power supplies and variable-speed motor drives Digital circuit power distribution and decoupling PCB layout and stack-up Mixed-signal PCB layout RF and transient immunity Power line disturbances Precompliance EMC measurements New appendices on dipole antennae, the theory of partial inductance, and the ten most common EMC problems The concepts presented are applicable to analog and digital circuits operating from below audio frequencies to those in the GHz range. Throughout the book, an emphasis is placed on cost-effective EMC designs, with the amount and complexity of mathematics kept to the strictest minimum. Complemented with over 250 problems with answers, Electromagnetic Compatibility Engineering equips readers with the knowledge needed to design electronic equipment that is compatible with the electromagnetic environment and compliant with national and international EMC regulations. It is an essential resource for practicing engineers who face EMC and regulatory compliance issues and an ideal textbook for EE courses at the advanced undergraduate and graduate levels.

There is currently no single book that covers the mathematics, circuits, and electromagnetics backgrounds needed for the study of electromagnetic compatibility (EMC). This book aims to redress the balance by focusing on EMC and providing the background in all three disciplines. This background is necessary for many EMC practitioners who have been out of study for some time and who are attempting to follow and confidently utilize more advanced EMC texts. The book is split into three parts: Part 1 is the refresher course in the underlying mathematics; Part 2 is the foundational chapters in electrical circuit theory; Part 3 is the heart of the book: electric and magnetic fields, waves, transmission lines and antennas. Each part of the book provides an independent area of study, yet each is the logical step to the next area, providing a comprehensive course through each topic. Practical EMC applications at the end of each chapter illustrate the applicability of the chapter topics. The Appendix reviews the fundamentals of EMC testing and measurements.

This"know-how"book gives readers a concise understanding of the fundamentals of EMC, from basic mathematical and physical concepts through present, computer-age methods used in analysis, design, and tests. With contributions from leading experts in their fields, the text provides a comprehensive overview. Fortified with information on how to solve potential electromagnetic interference (EMI) problems that may arise in electronic design, practitioners will be betterable to grasp the latest techniques, trends, and applications of this increasingly important engineering discipline. Handbook of Electromagnetic Compatibility contains extensive treatment of EMC applications to radio and wireless communications, fiber optics communications, and plasma effects. Coverage of EMC-related issues includes lightning, electromagnetic pulse, biological effects, and electrostatic discharge. Practical examples are used to illustrate the material, and all information is presented in an accessible and organized format. The text is intended primarily for those practicing engineers who need agood foundation in EMC, but it will also interest faculty and students, since a good portion of the material covered can find use in the classroom or as a springboard for further research. - The chapters are written by experts in the field - Details the fundamental principles, then moves to more advanced topics - Covers computational electromagnetics applied to EMC problems - Presents an extensive treatment of EMC applications to: Radio and wireless communications, Fiber optic communications, Plasma effects, Wired circuits, Microchips, Includes practical examples, Fiber optic, Communications, Plasma effects, Wired circuits, Microchips, Includes practical examples

A practical introduction to techniques for the design of electronic products from the Electromagnetic compatibility (EMC) perspective Introduces techniques for the design of electronic products from the EMC aspects Covers normalized EMC requirements and design principles to assure product compatibility Describes the main topics for the control of electromagnetic interferences and recommends design improvements to meet international standards requirements (FCC, EU EMC directive, Radio acts, etc.) Well organized in a logical sequence which starts from basic knowledge and continues through the various aspects required for compliance with EMC requirements Includes practical examples and case studies to illustrate design features and troubleshooting Author is the founder of the EMC design risk evaluation approach and this book presents many years’ experience in teaching and researching the topic

A large amount of natural or artificially produced physical phenomena are exploited for practical applications, even though several of them give rise to unpleasant consequences. These ultimately manifest themselves under form of malfunction or definitive failure of components and systems, or environmental hazard. So far, manifold categories of inadvertent or deliberate sources have been discovered to simultaneously produce useful effects in some ways but adverse ones in others. In particular, responsible for the growing interest in the last decades for Electromagnetic Compatibility (EMC) has been the progressive miniaturisation and sensitivity of electronic components and circuits, often operating in close proximity to relatively powerful sources of electromagnetic interference. Potential authors of books on the subject-matter are fully aware of the fact that planning production of manageable handbooks capable to treat all the EMC case studies of practical and long-lasting interest could result in a questionable and difficult undertaking. Therefore, in addition to textbooks providing a thorough background on basic aspects, thus being well-tailored for students and those which want to get in contact with this discipline, the most can be made to jointly sustain a helpful and practicable publishing activity is to supply specialised monographs or miscellanies of selected topics. Such resources are preferentially addressed to post-graduate students, researchers and designers, often employed in the forefront of research or engaged for remodelling design paradigms. Hence, the prerequisite for such a class of publications should consist in arousing critical sense and promoting new ideas. This is the object of Electromagnetic Compatibility in Power Systems, which tries to rather discuss special subjects, or throw out suggestions for reformulating conventional approaches, than to appear as a reference text. A common motivation encouraged the contributors to bringing together a number of accounts of the research that they have undertaken over the late years: willing to fill the important need of covering EMC topics rather proper to transmission and distribution of electric power than, more usually, to Electronics and Telecommunication Systems. - EMC topics for Power Systems, at last! - Investigating EMC features of distributed and/or complex systems - A broad body of knowledge for specific applications - A stimulating support for those which are engaged in the forefront of research and design - An example of how breaking ideas should be encouraged and proudly applied - A fruitful critique to overcomplicated and unpractical models - A comprehensive resource to estimate the important role of EMC at lower frequencies

Circuits are faster and more tightly packed than ever, wireless technologies increase the electromagnetic (EM) noise environment, new materials entail entirely new immunity issues, and new standards govern the field of electromagnetic compatibility (EMC). Maintaining the practical and comprehensive approach of its predecessor, Principles and Techniques of Electromagnetic Compatibility, Second Edition reflects these emerging challenges and new technologies introduced throughout the decade since the first edition appeared. What's new in the Second Edition? Characterization and testing for high-speed design of clock frequencies up to and above 6 GHz Updates to the regulatory framework governing EM compliance Additional coverage of the printed circuit board (PCB) environment as well as additional numerical tools An entirely new section devoted to new applications, including signal integrity, wireless and broadband technologies, EMC safety, and statistical EMC Added coverage of new materials such as nanomaterials, band gap devices, and composites Along with new and updated content, this edition also includes additional worked examples that demonstrate how estimates can guide the early stages of design. The focus remains on building a sound foundation on the fundamental concepts and linking this to practical applications, rather than supplying application-specific fixes that do not easily generalize to other areas.

INTRODUCTION TO ELECTROMAGNETIC COMPATIBILITY The revised new edition of the classic textbook is an essential resource for anyone working with today’s advancements in both digital and analog devices, communications systems, as well as power/energy generation and distribution. Introduction to Electromagnetic Compatibility provides thorough coverage of the techniques and methodologies used to design and analyze electronic systems that function acceptably in their electromagnetic environment. Assuming no prior familiarity with electromagnetic compatibility, this user-friendly textbook first explains fundamental EMC concepts and technologies before moving on to more advanced topics in EMC system design. This third edition reflects the results of an extensive detailed review of the entire second edition, embracing and maintaining the content that has “stood the test of time”, such as from the theory of electromagnetic phenomena and associated mathematics, to the practical background information on U.S. and international regulatory requirements. In addition to converting Dr. Paul’s original SPICE exercises to contemporary utilization of LTSPICE, there is new chapter material on antenna modeling and simulation. This edition will continue to provide invaluable information on computer modeling for EMC, circuit board and system-level EMC design, EMC test practices, EMC measurement procedures and equipment, and more such as: Features fully-worked examples, topic reviews, self-assessment questions, end-of-chapter exercises, and numerous high-quality images and illustrations Contains useful appendices of phasor analysis methods, electromagnetic field equations and waves. The ideal textbook for university courses on EMC, Introduction to Electromagnetic Compatibility, Third Edition is also an invaluable reference for practicing electrical engineers dealing with interference issues or those wanting to learn more about electromagnetic compatibility to become better product designers.