Discover the latest GM swap technology in this all-new, comprehensive LT swapper's guide. The GM LS engine has dominated the crate and engine-swap market for the past 20 years, and now the new LT engine has become a popular crate engine for swap projects as well. As essentially the next-generation LS, the LT features a compact footprint, lightweight design, and traditional V-8 pushrod architecture similar to its predecessor, so it swaps easily into many classic cars, hot rods, and even foreign sports cars.The new LT1/LT4 takes a bold step forward in technology, using active fuel management, direct injection, an upgraded ignition system, continuous variable valve timing, and a wet- or dry-sump oiling system. With this advanced technology and higher performance, more engine swappers are using the LT platform. Swapping expert and longtime author Jefferson Bryant presents thorough instruction for each crucial step in the LT swap process.Although the new LT shares the same basic engine design with the LS, almost all of the LT engine parts have been revised and updated. As a result, the mounting process has changed substantially, including motor-mount location, K-member mounting process, and component clearance; all these aspects of the swap are comprehensively covered. The high-compression direct-injected engines require higher-pressure fuel systems, so the fuel pump and fuel lines must be compatible with the system. LTs also feature revised bellhousing bolt patterns, so they require different adapter plates. The oil pan profile and oiling systems are unique, and this can present crossmember clearance problems. All other important aspects of the swap process are covered, including accessory drives and cooling systems, engine management systems, tuning software, controllers, and exhaust, so you can install the LT in popular GM A- and F-Body platforms as well as almost any other chassis. Solutions for the major swapping challenges, parts compatibility, and clearance issues are provided.Muscle car, hot rod, truck, and sports car owners have embraced the new LT platform and the aftermarket has followed suit with a wide range of products to facilitate swap projects. This book affords comprehensive guidance so you can complete a swap with confidence. If you have a project in the works, are planning a project in the near future, or if you simply want to learn how the swap process takes place, this book is for you.

Discover the latest GM swap technology in this all-new, comprehensive LT swapper’s guide. The GM LS engine has dominated the crate and engine-swap market for the past 20 years, and now the new LT engine has become a popular crate engine for swap projects as well. As essentially the next-generation LS, the LT features a compact footprint, lightweight design, and traditional V-8 pushrod architecture similar to its predecessor, so it swaps easily into many classic cars, hot rods, and even foreign sports cars. The new LT1/LT4 takes a bold step forward in technology, using active fuel management, direct injection, an upgraded ignition system, continuous variable valve timing, and a wet- or dry-sump oiling system. With this advanced technology and higher performance, more engine swappers are using the LT platform. Swapping expert and longtime author Jefferson Bryant presents thorough instruction for each crucial step in the LT swap process. Although the new LT shares the same basic engine design with the LS, almost all of the LT engine parts have been revised and updated. As a result, the mounting process has changed substantially, including motor-mount location, K-member mounting process, and component clearance; all these aspects of the swap are comprehensively covered. The high-compression direct-injected engines require higher-pressure fuel systems, so the fuel pump and fuel lines must be compatible with the system. LTs also feature revised bellhousing bolt patterns, so they require different adapter plates. The oil pan profile and oiling systems are unique, and this can present crossmember clearance problems. All other important aspects of the swap process are covered, including accessory drives and cooling systems, engine management systems, tuning software, controllers, and exhaust, so you can install the LT in popular GM A- and F-Body platforms as well as almost any other chassis. Solutions for the major swapping challenges, parts compatibility, and clearance issues are provided. Muscle car, hot rod, truck, and sports car owners have embraced the new LT platform and the aftermarket has followed suit with a wide range of products to facilitate swap projects. This book affords comprehensive guidance so you can complete a swap with confidence. If you have a project in the works, are planning a project in the near future, or if you simply want to learn how the swap process takes place, this book is for you.

Introduced in 1997, the GM LS engine has become the dominant V-8 engine in GM vehicles and a top-selling high-performance crate engine. GM has released a wide range of Gen III and IV LS engines that deliver spectacular efficiency and performance. These compact, lightweight, cutting-edge pushrod V-8 engines have become affordable and readily obtainable from a variety of sources. In the process, the LS engine has become the most popular V-8 engine to swap into many American and foreign muscle cars, sports cars, trucks, and passenger cars. To select the best engine for an LS engine swap, you need to carefully consider the application. Veteran author and LS engine swap master Jefferson Bryant reveals all the criteria to consider when choosing an LS engine for a swap project. You are guided through selecting or fabricating motor mounts for the project. Positioning the LS engine in the engine compartment and packaging its equipment is a crucial part of the swap process, which is comprehensively covered. As part of the installation, you need to choose a transmission crossmember that fits the engine and vehicle as well as selecting an oil pan that has the correct profile for the crossmember with adequate ground clearance. Often the brake booster, steering shaft, accessory pulleys, and the exhaust system present clearance challenges, so this book offers you the best options and solutions. In addition, adapting the computer-control system to the wiring harness and vehicle is a crucial aspect for completing the installation, which is thoroughly detailed. As an all-new edition of the original top-selling title, LS Swaps: How to Swap GM LS Engines into Almost Anything covers the right way to do a spectrum of swaps. So, pick up this guide, select your ride, and get started on your next exciting project.

GM's LT1/LT4 engines represented the highest level of small-block V-8 develop-ment for the period between the legendary small-block Chevrolet and the introduction of the LS-series V-8. They powered all of the hottest production vehicles of the 1990s, including the Corvette, Camaro/Firebird, and Caprice/Impala SS. These enhanced small-blocks were reliable and strong, and can be built to impressive performance levels on a relatively small budget, with the right upgrades. This book guides you through the factory and aftermarket components of the LT1/LT4 engines, offering sound performance advice and recommendations. Additionally, complete engine buildup recipes are provided, along with their respective horsepower and torque levels. You can follow the advice of experts and achieve targeted results for your own project.

How to Swap GM LS-Series Engines into (Almost) Anything shows how to fit these powerhouse engines into popular GM F-Body cars, such as the Camaro and Firebird, but also how install these powerplants non-GM muscle cars, sports cars, trucks, and of course, hot rods. This book includes a historical review, complete specs and detailed information, so you can select and fit the best LS engine for a particular vehicle and application. A section on mounting kits explains how to install these engines into a variety of cars using readily available motor mount kits, universal engine mounts, or fabricated mounts. In addition, the book shows you how to perform necessary oil pan modifications and adapt accessory drivers as well as choose the most suitable fuel pump, exhaust system, wiring harness, and electronic control module.

In this illustrated guide, an LS-series expert takes you step-by-step through the process of installing GM’s high-power engines in any automobile. First underhood in the 1997 Corvette, GM’s LS engines have proven powerful, reliable, and amazingly fuel efficient. Since that time, more than a dozen variants have been produced, ranging from bulletproof, iron-block 4.8-liter workhorses to the supercharged 7.0-liter LS7. Among performance enthusiasts, these remarkable V-8 engines have become a favorite for engine swaps, owing to their fantastic power, compact design, and modification possibilities. In GM LS-Series Engines: The Complete Swap Manual, professional LS-series engine specialist and technician Joseph Potak details all the considerations involved in performing this swap into any vehicle. With clear instructions, color photos, diagrams, and specification tables, Potak guides you through: Mounting your new engine Configuring the EFI system Designing fuel and exhaust systems Sourcing the correct accessories for your application Transmission, torque converters, and clutches Performance upgrades and power-adders Troubleshooting, should problems arise

The General Motors G-Body is one of the manufacturer's most popular chassis, and includes cars such as Chevrolet Malibu, Monte Carlo, and El Camino; the Buick Regal, Grand National, and GNX; the Oldsmobile Cutlass Supreme; the Pontiac Grand Prix, and more. This traditional and affordable front engine/rear-wheel-drive design lends itself to common upgrades and modifications for a wide range of high-performance applications, from drag racing to road racing. Many of the vehicles GM produced using this chassis were powered by V-8 engines, and others had popular turbocharged V-6 configurations. Some of the special-edition vehicles were outfitted with exclusive performance upgrades, which can be easily adapted to other G-Body vehicles. Knowing which vehicles were equipped with which options, and how to best incorporate all the best-possible equipment is thoroughly covered in this book. A solid collection of upgrades including brakes, suspension, and the installation of GMs most popular modern engine-the LS-Series V-8-are all covered in great detail. The aftermarket support for this chassis is huge, and the interchangeability and affordability are a big reason for its popularity. It's the last mass-produced V-8/rear-drive chassis that enthusiasts can afford and readily modify. There is also great information for use when shopping for a G-Body, including what areas to be aware of or check for possible corrosion, what options to look for and what should be avoided. No other book on the performance aspects of a GM G-Body has been published until now, and this book will serve as the bible to G-Body enthusiasts for years to come.

In the last few years of the automotive collector market, light trucks have become a hot commodity—especially Chevy trucks. Unlike in the past, heavily modified vehicles command a premium over stock restorations. Owners of these trucks, which were often fairly crude and not much fun to drive, are demanding modern performance and technology in each system. The brakes, suspension, steering, air conditioning, and electronics can be upgraded to make your old truck drive like new. Of course, the drivetrain is arguably the most important part of that equation, and that means swapping an LS or LT engine and a modern transmission into your classic Chevy truck. To perform a successful LS or LT engine swap into an older Chevy truck, proper planning, the right combination of parts, and the correct information is required to complete the project. How to Swap LS & LT Engines into Chevy & GMC Trucks: 1960–1998 provides instruction and guidance for selecting the best engine for your budget, choosing the adapter plates and engine mounts, dropping the engine into the truck, selecting the ideal transmission and drivelines, and completing all facets of the swap. You must ensure that all of the other components on the car are compatible with the engine, so author Bryant instructs you how to integrate the electronic engine control system; select and install the exhaust, intake, and fuel pumps; and upgrade the cooling system for the high-performance LS and LT. While the swapping process is covered in detail, the author also provides a helpful LS and LT engine guide. This helps you find the best option for your application and understand the different considerations for these two engines. Whether you are ready to get started right now or want to use this book to determine whether you want to tackle this project, this book is essential to making informed decisions along the way.

Have you made plans for a new Hemi swap into your classic car? Maybe you’re just curious about the process and want to know how much work is involved. Either way, New Hemi Engine Swaps: How to Swap 5.7L, 6.1L, 6.4L, and Hellcat Engines into Almost Anything has you covered! Even casual enthusiasts are aware of how many people are swapping modern technology into vintage chassis. Successful LS swaps have been common for more than a decade. They seem to be everywhere among GM enthusiasts. On the Mopar side, the new Hemi platform is now 20 years old, so plenty of salvage-yard cores are available. With the introduction of the new Hellcat in 2015 (as well as a more robust crate-engine program in recent years directly from Mopar), aftermarket manufacturers have recently seen the wisdom of making peripherals and parts to simplify the process of this swap. Suddenly, swapping a crate Hemi seems as achievable as an LS swap. In New Hemi Engine Swaps: How to Swap 5.7L, 6.1L, 6.4L, and Hellcat Engines into Almost Anything, expert Joseph Hinds guides you through the process of turning your vintage ride into a modern street machine. The essentials are covered, including engine mounts, transmission crossmembers, headers that actually fit, and solutions for other common issues. Also covered are fuel-supply items (pumps and tanks) and engine-compatibility concerns (oil filter locations and oil-pan accommodations). Finally, the biggest concerns for most are the wiring, modern powertrain control modules (PCMs), computer controls, and fuel injection, all of which are covered here as well. There are even step-by-step instructions to fit a modern Hemi into an early-1970s-era Duster as well as a feature about programming aftermarket electronic fuel-injection (EFI) systems. Now that the degree of difficulty in performing these swaps no longer requires a degree in computer science with welding certifications on the side, many are looking at their vintage Mopars in a new light. Whether you want to do this yourself, farm it out to a professional, or if you are just curious about how it is done, this is the guide for you.

For gearheads who want to build or modify popular LS engines, How to Build and Modify GM LS-Series Engines provides the most detailed and extensive instructions ever offered for those modding LS engines through the Gen IV models. The LS1 engine shook the performance world when introduced in the 1997 Corvette. Today the LS9 version far eclipses even the mightiest big-blocks from the muscle car era, and it does so while meeting modern emissions requirements and delivering respectable fuel economy. Premier LS engine technician Joseph Potak addresses every question that might come up: Block selection and modifications Crankshaft and piston assemblies Cylinder heads, camshafts, and valvetrain Intake manifolds and fuel system Header selection Setting up ring and bearing clearances for specific uses Potak also guides readers through forced induction and nitrous oxide applications. In addition, the book is fully illustrated with color photography and detailed captions to further guide readers through the mods described, from initial steps to final assembly. Whatever the reader’s performance goals,How to Build and Modify GM LS-Series Engines will guide readers through the necessary modifications and how to make them. It’s the ultimate resource for building the ultimate LS-series engine! The Motorbooks Workshop series covers topics that engage and interest car and motorcycle enthusiasts. Written by subject-matter experts and illustrated with step-by-step and how-it’s-done reference images, Motorbooks Workshop is the ultimate resource for how-to know-how.