This book describes and explains the many features of ground engineering that require special design attention to ensure safety and adequate performance. It is useful for civil and structural engineers code-drafting committees; clients; structural-design students and public authorities.

The purpose of this book is to explain the philosophy set out in Eurocode 7, the new European code of practice for geotechnical design, and, by means of series of typical examples, to show how this philosophy is used in practice. This book is aimed at: • practising engineers, to assist them to carry out geotechnical designs to Eurocode 7 using the limit state design method and partial factors; • lecturers and students on courses where design to Eurocode 7 is being taught. It is envisaged that practising engineers, using this book to assist them carry out geotechnical designs to Eurocode 7, will have access to the prestandard version of Eurocode 7, ENV 1997 -I, so the authors have concentrated on the main principles and have not provided a commentary on all the clauses. However sufficient detail has been included in the book to enable it to be used on its own by those learning the design principles who may not have access to Eurocode 7. For example, the values of the partial factors and the principal equations given in Eurocode 7 have been included and these are used in the design examples in this book. To assist the reader, the numbering, layout and titles of the chapters closely follow those presented in Eurocode 7.

This book describes and explains the many features of ground engineering that require special design attention to ensure safety and adequate performance. It is useful for civil and structural engineers code-drafting committees; clients; structural-design students and public authorities.

This book describes and explains the many features of ground engineering that require special design attention to ensure safety and adequate performance. It is useful for civil and structural engineers code-drafting committees; clients; structural-design students and public authorities.

Decoding Eurocode 7 provides a detailed examination of Eurocode 7 Parts 1 and 2 and an overview of the associated European and International standards. The detail of the code is set out in summary tables and diagrams, with extensive. Fully annotated worked examples demonstrate how to apply it to real designs. Flow diagrams explain how reliability is introduced into design and mind maps gather related information into a coherent framework. Written by authors who specialise in lecturing on the subject, Decoding Eurocode 7 explains the key principles and application rules of Eurocode 7 in a logical and simple manner. Invaluable for practitioners, as well as for high-level students and researchers working in geotechnical fields.

Annotation - Basis of design - Materials - Durability - Structural analysis - Ultimate limit states - Serviceability limit states - Detailing of reinforcement and prestressing tendons - Detailing for members and particular rules - Additional rules for precast concrete structures - Design for the execution stages.

EN 1994-2 is one standard of the Eurocode suite & describes the principles & requirements for safety, serviceability & durability of composite steel & concrete bridges. This guide provides the user with guidance on the interpretation & use of EN 1994-2 through worked examples in relation to the general rules & the rules for bridges.

The ground is one of the most highly variable of engineering materials. It is therefore not surprising that geotechnical designs depend on local site conditions and local engineering experience. Engineering practices, relating to investigation and design methods site understanding and to safety levels acceptable to society, will therefore vary between different regions.The challenge in geotechnical engineering is to make use of worldwide geotechnical experience, established over many years, to aid in the development and harmonization of geotechnical design codes. Given the significant uncertainties involved, empiricism and engineering

- General - Requirements - Principles of limit state design - Basic variables - Structural analysis and design assisted by testing - Verification by the partial factor method - Annex A1 (normative) - Application for buildings - Management of structural reliability for construction works - Basis for partial factor design and reliability analysis - Design assisted by testing - Appendix A: The Construction Products Directive (89/106/EEC) - Appendix B: The Eurocode Suite - Appendix C: Basic statistical terms and techniques - Appendix D: National standard organizations