This book examines the operation of biological wastewater treatment plants (WWTPs), with a focus on maintaining effluent water quality while keeping operational costs within constrained limits. It includes control operation and decision schemes and is based on the use of benchmarking scenarios that yield easily reproducible results that readers can implement for their own solutions. The final criterion is the effect of the applied control strategy on plant performance – specifically, improving effluent quality, reducing costs and avoiding violations of established effluent limits. The evaluation of the different control strategies is achieved with the help of two Benchmark Simulation Models (BSM1, BSM2). Given the complexity of the biological and biochemical processes involved and the major fluctuations in the influent flow rate, controlling WWTPs poses a serious challenge. Further, the importance of control goal formulation and control structure design in relation to WWTP process control is widely recognized. Of particular interest are the regulations governing the compliance with effluent criteria. Authorities measure compliance with these criteria on the basis of long or short timeframes, and the legal constraints imposed on effluent pollutant concentrations are among the most essential aspects of control structures for WWTPs. This book explores all these facets in detail.

Wastewater treatment plants are large non-linear systems subject to large perturbations in wastewater flow rate, load and composition. Nevertheless these plants have to be operated continuously, meeting stricter and stricter regulations. Many control strategies have been proposed in the literature for improved and more efficient operation of wastewater treatment plants. Unfortunately, their evaluation and comparison – either practical or based on simulation – is difficult. This is partly due to the variability of the influent, to the complexity of the biological and biochemical phenomena and to the large range of time constants (from a few minutes to several days). The lack of standard evaluation criteria is also a tremendous disadvantage. To really enhance the acceptance of innovative control strategies, such an evaluation needs to be based on a rigorous methodology including a simulation model, plant layout, controllers, sensors, performance criteria and test procedures, i.e. a complete benchmarking protocol. This book is a Scientific and Technical Report produced by the IWA Task Group on Benchmarking of Control Strategies for Wastewater Treatment Plants. The goal of the Task Group includes developing models and simulation tools that encompass the most typical unit processes within a wastewater treatment system (primary treatment, activated sludge, sludge treatment, etc.), as well as tools that will enable the evaluation of long-term control strategies and monitoring tasks (i.e. automatic detection of sensor and process faults). Work on these extensions has been carried out by the Task Group during the past five years, and the main results are summarized in Benchmarking of Control Strategies for Wastewater Treatment Plants. Besides a description of the final version of the already well-known Benchmark Simulation Model no. 1 (BSM1), the book includes the Benchmark Simulation Model no. 1 Long-Term (BSM1_LT) – with focus on benchmarking of process monitoring tasks – and the plant-wide Benchmark Simulation Model no. 2 (BSM2). Authors: Krist V. Gernaey, Technical University of Denmark, Lyngby, Denmark, Ulf Jeppsson, Lund University, Sweden, Peter A. Vanrolleghem, Université Laval, Quebec, Canada and John B. Copp, Primodal Inc., Hamilton, Ontario, Canada

Close to one-half of all Americans live in coastal counties. The resulting flood of wastewater, stormwater, and pollutants discharged into coastal waters is a major concern. This book offers a well-delineated approach to integrated coastal management beginning with wastewater and stormwater control. The committee presents an overview of current management practices and problems. The core of the volume is a detailed model for integrated coastal management, offering basic principles and methods, a direction for moving from general concerns to day-to-day activities, specific steps from goal setting through monitoring performance, and a base of scientific and technical information. Success stories from the Chesapeake and Santa Monica bays are included. The volume discusses potential barriers to integrated coastal management and how they may be overcome and suggests steps for introducing this concept into current programs and legislation. This practical volume will be important to anyone concerned about management of coastal waters: policymakers, resource and municipal managers, environmental professionals, concerned community groups, and researchers, as well as faculty and students in environmental studies.

The city of Pittsburgh and surrounding area of southwestern Pennsylvania face complex water quality problems, due in large part to aging wastewater infrastructures that cannot handle sewer overflows and stormwater runoff, especially during wet weather. Other problems such as acid mine drainage are a legacy of the region's past coal mining, heavy industry, and manufacturing economy. Currently, water planning and management in southwestern Pennsylvania is highly fragmented; federal and state governments, 11 counties, hundreds of municipalities, and other entities all play roles, but with little coordination or cooperation. The report finds that a comprehensive, watershed-based approach is needed to effectively meet water quality standards throughout the region in the most cost-effective manner. The report outlines both technical and institutional alternatives to consider in the development and implementation of such an approach.

FROM THE PREFACE In this time of dwindling budgets, increasing service needs, and increasing regulatory requirements, wastewater treatment professionals are continually called upon to upgrade their wastewater treatment plants. To do so efficiently and effectively, one must develop a clear approach to use in upgrading a plant and have the proper tools available to implement that approach. This book is meant to assist readers in developing and implementing their upgrading projects. First, Chapter 1 details the upgrading approach. The tools to be used are presented in Chapters 2 through 6. Finally, in Chapter 7, six case histories are presented to illustrate the plant upgrading techniques presented in the previous chapters. Through this book, the authors hope to assist readers in meeting their upgrade requirements, while making the most efficient use of the resources at hand.

This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.