This volume contains results gained from the EU-funded 6th Framework project ADIGMA (Adaptive Higher-order Variational Methods for Aerodynamic Applications in Industry). The goal of ADIGMA was the development and utilization of innovative adaptive higher-order methods for the compressible flow equations enabling reliable, mesh independent numerical solutions for large-scale aerodynamic applications in aircraft industry. The ADIGMA consortium was comprised of 22 organizations which included the main European aircraft manufacturers, the major European research establishments and several universities, all with well proven expertise in Computational Fluid Dynamics (CFD). The book presents an introduction to the project, exhibits partners’ methods and approaches and provides a critical assessment of the newly developed methods for industrial aerodynamic applications. The best numerical strategies for integration as major building blocks for the next generation of industrial flow solvers are identified.

This book consists of important contributions by world-renowned experts on adaptive high-order methods in computational fluid dynamics (CFD). It covers several widely used, and still intensively researched methods, including the discontinuous Galerkin, residual distribution, finite volume, differential quadrature, spectral volume, spectral difference, PNPM, and correction procedure via reconstruction methods. The main focus is applications in aerospace engineering, but the book should also be useful in many other engineering disciplines including mechanical, chemical and electrical engineering. Since many of these methods are still evolving, the book will be an excellent reference for researchers and graduate students to gain an understanding of the state of the art and remaining challenges in high-order CFD methods.

The book describes the main findings of the EU-funded project IDIHOM (Industrialization of High-Order Methods – A Top-Down Approach). The goal of this project was the improvement, utilization and demonstration of innovative higher-order simulation capabilities for large-scale aerodynamic application challenges in the aircraft industry. The IDIHOM consortium consisted of 21 organizations, including aircraft manufacturers, software vendors, as well as the major European research establishments and several universities, all of them with proven expertise in the field of computational fluid dynamics. After a general introduction to the project, the book reports on new approaches for curved boundary-grid generation, high-order solution methods and visualization techniques. It summarizes the achievements, weaknesses and perspectives of the new simulation capabilities developed by the project partners for various industrial applications, and includes internal- and external-aerodynamic as well as multidisciplinary test cases.

The book contains a selection of high quality papers, chosen among the best presentations during the International Conference on Spectral and High-Order Methods (2012), and provides an overview of the depth and breath of the activities within this important research area. The carefully reviewed selection of the papers will provide the reader with a snapshot of state-of-the-art and help initiate new research directions through the extensive bibliography. ​

The main objective of this work is the practical development of the discontinuous Galerkin method, arguably the most mature high-order discretisation, for the scale resolving simulations of turbomachinery flows.

The book introduces modern high-order methods for computational fluid dynamics. As compared to low order finite volumes predominant in today's production codes, higher order discretizations significantly reduce dispersion errors, the main source of error in long-time simulations of flow at higher Reynolds numbers. A major goal of this book is to teach the basics of the discontinuous Galerkin (DG) method in terms of its finite volume and finite element ingredients. It also discusses the computational efficiency of high-order methods versus state-of-the-art low order methods in the finite difference context, given that accuracy requirements in engineering are often not overly strict. The book mainly addresses researchers and doctoral students in engineering, applied mathematics, physics and high-performance computing with a strong interest in the interdisciplinary aspects of computational fluid dynamics. It is also well-suited for practicing computational engineers who would like to gain an overview of discontinuous Galerkin methods, modern algorithmic realizations, and high-performance implementations.

Um die komplexe Physik in kompressiblen Strömungen genauer zu verstehen, kommen vermehrt Simulationen zum Einsatz. Jedoch können weit verbreitete kommerzielle Softwarepakete die Physik aufgrund ihrer niedrigen Genauigkeit oft nicht korrekt erfassen. In dieser Arbeit wird eine diskontinuierliche Galerkin Methode mit hoher Ordnung entwickelt, welche eine hohe Genauigkeit erzielt. Dabei werden insbesondere zwei Probleme, die im Kontext von Verfahren mit hoher Ordnung auftreten, behandelt. Zum einen wird die Gittergenerierung durch das Verwenden einer Immersed Boundary Methode deutlich vereinfacht. Dies bedeutet, dass die Problemgeometrie aus einem deutlich einfacheren Hintergrundgitter herausgeschnitten wird. Die Geometrie wird mit Hilfe einer Level-Set Funktion dargestellt, und die Integration auf den entstehenden geschnittenen Zellen wird mittels einer hierarchischen Moment-Fitting Quadratur durchgeführt. Das Problem der sehr kleinen oder stark gekrümmten Zellen wird durch Zellagglomeration gelöst. Zum zweiten wird die starke Zeitschrittbeschränkung durch anisotrope Gitter mit Hilfe eines lokalen Zeitschrittverfahrens behoben. Diverse numerische Experimente bestätigen die hohe Genauigkeit, Effizienz und geometrische Flexibilität der vorgestellten Methode.

This book constitutes the thoroughly refereed post-conference proceedings of the 6th International Conference on Finite Difference Methods, FDM 2014, held in Lozenetz, Bulgaria, in June 2014. The 36 revised full papers were carefully reviewed and selected from 62 submissions. These papers together with 12 invited papers cover topics such as finite difference and combined finite difference methods as well as finite element methods and their various applications in physics, chemistry, biology and finance.

The differential quadrature hierarchical finite element method (DQHFEM) was proposed by Bo Liu. This method incorporated the advantages and the latest research achievements of the hierarchical finite element method (HFEM), the differential quadrature method (DQM) and the isogeometric analysis (IGA). The DQHFEM also overcame many limitations or difficulties of the three methods.This unique compendium systemically introduces the construction of various DQHFEM elements of commonly used geometric shapes like triangle, tetrahedrons, pyramids, etc. Abundant examples are also included such as statics and dynamics, isotropic materials and composites, linear and nonlinear problems, plates as well as shells and solid structures.This useful reference text focuses largely on numerical algorithms, but also introduces some latest advances on high order mesh generation, which often has been regarded as the major bottle neck for the wide application of high order FEM.

This book offers detailed insights into new methods for high-fidelity CFD, and their industrially relevant applications in aeronautics. It reports on the H2020 TILDA project, funded by the European Union in 2015-2018. The respective chapters demonstrate the potential of high-order methods for enabling more accurate predictions of non-linear, unsteady flows, ensuring enhanced reliability in CFD predictions. The book highlights industrially relevant findings and representative test cases on the development of high-order methods for unsteady turbulence simulations on unstructured grids; on the development of the LES/DNS methodology by means of multilevel, adaptive, fractal and similar approaches for applications on unstructured grids; and on leveraging existent large-scale HPC networks to facilitate the industrial applications of LES/DNS in daily practice. Furthermore, the book discusses multidisciplinary applications of high-order methods in the area of aero-acoustics. All in all, it offers timely insights into the application and performance of high-order methods for CFD, and an extensive reference guide for researchers, graduate students, and industrial engineers whose work involves CFD and turbulence modeling.