Zero Emission Buildings shows what can be achieved when researchers and practitioners work together to develop the building performance level of tomorrow that is needed today. This book is based on the research and development activities performed in the Research Centre on Zero Emission Buildings (the ZEB Centre) from 2009 to 2017. Emissions of CO2 and other greenhouse gases must be reduced to limit global warming. Thus, the goal of the ZEB Centre has been to develop knowledge, competitive products, and solutions for existing and new buildings whose production, operation, and demolition give zero emissions of greenhouse gases, while also considering the users' needs for comfort and flexibility. The results presented here are based on research, as well as experience, from the development of nine real demonstration buildings. The key knowledge areas needed when designing, building, and operating zero emission buildings is discussed in detail. This book should be read by students of architecture and engineering, as well as practitioners looking for ways to contribute to a sustainable future. [Subject: Architecture, Environmental Studies, Sustainability & Green Design]

The building industry is one of the largest energy consumers and countries all over the world are striving to design buildings that satisfy the user’s expectations while containing their energy consumption. In this context, zero-energy buildings have emerged as a technological paradigm that can solve this global issue, but its implementation in different contexts has brought a profound debate about its technical, social, and environmental limitations. Thanks to contributions from a variety of scholars from different countries, this book explores different aspects of the zero-energy buildings and gives the reader a broad view of the feasibility of implementation in different contexts.

"Net zero energy buildings, equilibrium buildings or carbon neutral cities – depending on location and the reasons for making the calculation, the numbers are run differently. The variety of terms in use indicates that a scientific method is still lacking – which is a problem not just in regard to international communication, but also with respect to planning processes as a response to energy challenges. The clarification and meaning of the most important terms in use is extremely important for their implementation. Since October 2008, a panel of experts from an international energy agency has concerned itself with these topics as part of a project entitled “Towards Net Zero Energy Solar Buildings”. The objective is to analyse exemplary buildings that are near a zero-energy balance in order to develop methods and tools for the planning, design and operation of such buildings. The results are documented in this publication: In addition to the presentation of selected projects, it is not just architectural showcase projects that are shown – the focus is on relaying knowledge and experience gained by planners and builders. Even if many questions remain unanswered: Project examples that have already been implemented prove on a practical basis that the objective of a zero energy balance is already possible today."

Imagine fuel without fear. No climate change. No oil spills, no dead coalminers, no dirty air, no devastated lands, no lost wildlife. No energy poverty. No oil-fed wars, tyrannies, or terrorists. No leaking nuclear wastes or spreading nuclear weapons. Nothing to run out. Nothing to cut off. Nothing to worry about. Just energy abundance, benign and affordable, for all, forever. That richer, fairer, cooler, safer world is possible, practical, even profitable-because saving and replacing fossil fuels now works better and costs no more than buying and burning them. Reinventing Fire shows how business-motivated by profit, supported by civil society, sped by smart policy-can get the US completely off oil and coal by 2050, and later beyond natural gas as well. Authored by a world leader on energy and innovation, the book maps a robust path for integrating real, here-and-now, comprehensive energy solutions in four industries-transportation, buildings, electricity, and manufacturing-melding radically efficient energy use with reliable, secure, renewable energy supplies.Popular in tone and rooted in applied hope, Reinventing Fire shows how smart businesses are creating a potent, global, market-driven, and explosively growing movement to defossilize fuels. It points readers to trillions in savings over the next 40 years, and trillions more in new business opportunities.Whether you care most about national security, or jobs and competitive advantage, or climate and environment, this major contribution by world leaders in energy innovation offers startling innovations will support your values, inspire your support, and transform your sense of possibility.Pragmatic citizens today are more interested in outcomes than motives. Reinventing Fire answers this trans-ideological call. Whether you care most about national security, or jobs and competitive advantage, or climate and environment, its startling innovations will support your values, inspire your support, and transform your sense of possibility.

Net Zero Energy Buildings (NZEB): Concepts, Frameworks and Roadmap for Project Analysis and Implementation provides readers with the elements they need to understand, combine and contextualize design decisions on Net Zero Energy Buildings. The book is based on learned lessons from NZEB design, construction, operation that are integrated to bring the most relevant topics, such as multidisciplinarity, climate sensitivity, comfort requirements, carbon footprints, construction quality and evidence-based design. Chapters introduce the context of high performance buildings, present overviews of NZEB, cover the performance thresholds for efficient buildings, cover materials, micro-grid and smart grids, construction quality, performance monitoring, post occupancy evaluation, and more. - Offers a roadmap for engaging in energy efficiency in high performance buildings projects - Combines solid grounding in core concepts, such as energy efficiency, with a wider context that includes the technical, socio-cultural and environmental dimensions - Covers key areas for decision-making - Provides a logical framework to analyze projects in the context of environmental change - Presents worldwide examples and cases for different climates and societies

Net Zero-Energy Buildings have been the object of numerous studies in recent years as various countries have set this performance level as a long-term goal of their energy policies. This book presents a unique study of 30 NZEBs that have been constructed and have had their performance measured for at least 12 months. The study is based upon an international collaborative research initiated by the International Energy Agency - the Solar Heating and Cooling Programme (SHC). It is the first book to evaluate building strategies in houses, educational buildings and offices that have been demonstrated to work in practice. It examines how the design challenges of climate and building type have been addressed, and to what extent the various design approaches have been successful. This book presents convincing evidence that a careful re-thinking of conventional design norms can achieve a far greater performance benefit than is normally feasible. It identifies `solution sets? that work at the whole building level and at the individual building design challenge level for each climate and building type. In doing so, the book provides guidance as to how to improve the design by learning from these cases. Unusually for a book of this type it has examples of buildings in what are conventionally labeled "hot" and "cold" climates. A simple process is proposed for the reader to commission the analysis of their own climate to assess not only the conventional measure of how hot or cold or humid it is, but also to assess its suitability to support other NZEB technical challenge solutions sets such as Daylight or Natural Ventilation or comfort based climate conditioning.

This supporting document to Budget 2011 (HC 836, ISBN 9780102971033) sets out the Government's plan for sustainable, long-term economic growth for the UK economy. It sets out four ambitions that underpin this objective, these are: to create the most competitive tax system in the G20; to make the UK one of the best places in Europe to start, finance and grow a business; to encourage investment and exports as a route to a more balanced economy and to create a more educated workforce that is the most flexible in Europe. Growth review measures outlined in Chapter 2 cover these priority areas: planning; regulation; trade and inward investment; access to finance; competition; corporate governance; low carbon. The first phase of the review also examined eight sectors of the economy to remove the barriers to growth that affect them: advanced manufacturing; healthcare and life sciences; digital and creative industries; professional and business services; retail; construction; space; tourism.

Industrial internet of things (IIoT) is changing the face of industry by completely redefining the way stakeholders, enterprises, and machines connect and interact with each other in the industrial digital ecosystem. Smart and connected factories, in which all the machinery transmits real-time data, enable industrial data analytics for improving operational efficiency, productivity, and industrial processes, thus creating new business opportunities, asset utilization, and connected services. IIoT leads factories to step out of legacy environments and arcane processes towards open digital industrial ecosystems. Innovations in the Industrial Internet of Things (IIoT) and Smart Factory is a pivotal reference source that discusses the development of models and algorithms for predictive control of industrial operations and focuses on optimization of industrial operational efficiency, rationalization, automation, and maintenance. While highlighting topics such as artificial intelligence, cyber security, and data collection, this book is ideally designed for engineers, manufacturers, industrialists, managers, IT consultants, practitioners, students, researchers, and industrial industry professionals.

The papers presented in this volume address diverse challenges in energy systems, ranging from operational to investment planning problems, from market economics to technical and environmental considerations, from distribution grids to transmission grids and from theoretical considerations to data provision concerns and applied case studies. The International Symposium on Energy System Optimization (ISESO) was held on November 9th and 10th 2015 at the Heidelberg Institute for Theoretical Studies (HITS) and was organized by HITS, Heidelberg University and Karlsruhe Institute of Technology.

Building energy design is currently going through a period of major changes. One key factor of this is the adoption of net-zero energy as a long term goal for new buildings in most developed countries. To achieve this goal a lot of research is needed to accumulate knowledge and to utilize it in practical applications. In this book, accomplished international experts present advanced modeling techniques as well as in-depth case studies in order to aid designers in optimally using simulation tools for net-zero energy building design. The strategies and technologies discussed in this book are, however, also applicable for the design of energy-plus buildings. This book was facilitated by International Energy Agency's Solar Heating and Cooling (SHC) Programs and the Energy in Buildings and Communities (EBC) Programs through the joint SHC Task 40/EBC Annex 52: Towards Net Zero Energy Solar Buildings R&D collaboration. After presenting the fundamental concepts, design strategies, and technologies required to achieve net-zero energy in buildings, the book discusses different design processes and tools to support the design of net-zero energy buildings (NZEBs). A substantial chapter reports on four diverse NZEBs that have been operating for at least two years. These case studies are extremely high quality because they all have high resolution measured data and the authors were intimately involved in all of them from conception to operating. By comparing the projections made using the respective design tools with the actual performance data, successful (and unsuccessful) design techniques and processes, design and simulation tools, and technologies are identified. Written by both academics and practitioners (building designers) and by North Americans as well as Europeans, this book provides a very broad perspective. It includes a detailed description of design processes and a list of appropriate tools for each design phase, plus methods for parametric analysis and mathematical optimization. It is a guideline for building designers that draws from both the profound theoretical background and the vast practical experience of the authors.