Practical production of ordinary and special, high performance concretes and their behaviour and properties when fresh are the main themes of this book. It derives from the International RILEM Conference held in Paisley, Scotland in June 1996, and represents the culmination of the work of two RILEM Technical Committees (145 WSM Workability of Special Mixes, and 150 ECM Efficiency of Concrete Mixers). Very significant advances have been made recently in the development of concrete with outstanding properties. Such advances in research must be matched by progress in the technology of concrete production. This book focuses on production methods and on workability and handling, two fundamental and closely linked stages of the concrete construction process. It has a strongly practical emphasis, with many contributions showing how to build effectively using the many high performance concretes which have progressed from research into construction in recent years. The main themes covered are: production mixers and mixing processes; production methods; sprayed and very dry precasting mixes; fibre reinforced concrete; flowing and superfluid mixes; rheology; test methods; mix design and models; special cements and concretes.

Fresh concrete is generally featured in publications on concrete technology where the focus is often on fundamental rheology or diverse research methods, or the standards describe the tests but do not provide practical advice on interpretation of the results. This book aims to fill the gap between highly scientific and fundamental works and the many fragmented test specifications. It summarises the existing knowledge on the properties of fresh concrete in a form accessible to practicing engineers and concrete technologists. It includes a manual of practical tests which cover both the standard tests in major countries and new tests specifically applicable to site testing. The testing equipment required and the procedures are described in sufficient detail for the tests to be carried out, with references to selected national standards when compliance with specific conditions applicable in those countries is required. Particular attention is paid to properties of special fresh concrete mixes which are increasingly used in practical construction. The work will be of interest to engineers and others involved in the research, development, design and execution of concrete construction, including those working in EEC countries.

On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on "The Relation Between Theory and Practice it). Metal Forming" at the Sheraton-Cleveland Hotel during the Fall Meeting of AIME in Cleveland, Ohio. This conference was devoted to recent applications of theory to metal forming to establish a milestone in the current ability to predict phenomena during deformation processing and, thereby, demonstrate the utility of theory for process design. The papers were selected by first requesting presentations of relevant recent work from 68 recognized authorities in metal forming which resulted in 17 papers. A sub sequent call for papers resulted in the submission of 19 abstracts from which 4 papers were selected. The selection criteria required that the paper coupled theory with practice, and that the work was recent, unpublished and worthy of permanent record. The selection was performed by the Conference Chairman. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. e. , circa 1970, A, L. Hoffmanner Conference Chairman May, 1970 vii LIST OF CONTRIBUTORS Taylan Altan, Metalworking Division, Columbus Laboratories, Battelle Memorial Institute, Columbus, Ohio W. A.

This book introduces fundamentals, measurements, and applications of rheology of fresh cement-based materials. The rheology of a fresh cement-based material is one of its most important aspects, characterizing its flow and deformation, and governing the mixing, placement, and casting quality of a concrete. This is the first book to bring the field together on an increasingly important topic, as new types of cement-based materials and new concrete technologies are developed. It describes measurement equipment, procedures, and data interpretation of the rheology of cement paste and concrete, as well as applications such as self-compacting concrete, pumping, and 3D printing. A range of other cement-based materials such as fiber-reinforced concrete, cemented paste backfills, and alkali-activated cement are also examined. Rheology of Fresh Cement-Based Materials serves as a reference book for researchers and engineers, and a textbook for advanced undergraduate and graduate students.

Wire Technology: Process Engineering and Metallurgy, Second Edition, covers new developments in high-speed equipment and the drawing of ultra-high strength steels, along with new computer-based design and analysis software and techniques, including Finite Element Analysis. In addition, the author shares his design and risk prediction calculations, as well as several new case studies. New and extended sections cover measurement and instrumentation, die temperature and cooling, multiwire drawing, and high strength steel wire. Coverage of process economics has been greatly enhanced, including an exploration of product yields and cost analysis, as has the coverage of sustainability aspects such as energy use and recycling. As with the first edition, questions and problems are included at the end of each chapter to reinforce key concepts. Written by an internationally-recognized specialist in wire drawing with extensive academic and industry experience Provides real-world examples, problems, and case studies that allow engineers to easily apply the theory to their workplace, thus improving productivity and process efficiency Covers both ferrous and non-ferrous metals in one volume

Provides a clear, comprehensive introduction to the subject. Different problems of optimization are considered and illustrated with examples. Large sets of new experimental data are presented and discussed.