Wood products used in exterior applications must be protected against biodeterioration. Traditionally, wood products used CCA or the older inexpensive organic biocides, but environmental, disposal and governmental regulations have resulted in a rapid and dramatic worldwide shift. This book covers the many steps involved in developing a wood preservative and gives overviews on modified wood, wood deterioration, worldwide trends in wood protections, and mold in homes.

The Nordic Council of Ministers, the BAT Group under the Working Group for Sustainable Consumption and Production, has requested the consultant to prepare a report on Best Available Techniques (BAT) in wood preservation with chemicals in the Nordic countries. The Nordic wood preserving industry produces around 2.1 million m³ of impregnated wood per year, which is about one third of the total supply of pressure-treated wood in Europe. This report describes the present status of the used technologies, their emissions and impacts on the environment and technologies that can be considered BAT. The report will also be used as an input from the Nordic countries to the EU process under the Industrial Emissions Directive (IED) for preparation of the BAT Reference Document for preservation of wood and wood products with chemicals (WPC BREF) which is foreseen to start in 2014.

For decades chromated copper arsenate (CCA) was the primary preservative for treated wood used in residential construction. However, recent label changes submitted by CCA registrants will withdraw CCA from most residential applications. This action has increased interest in arsenic free preservative systems that have been standardized by the American Wood Preservers? Association. These include acid copper chromate (ACC), alkaline copper quat (ACQ), copper azole (CBA-A and CA-B), copper citrate (CC), copper dimethyldithio-carbamate (CDDC), and copper HDO (CX-A). All of these CCA alternatives rely on copper as their primary biocide, although some have co-biocides to help prevent attack by copper-tolerant fungi. These alternative treatments have appearance and handling properties‍?similar to those of CCA and are likely to be readily accepted by consumers. Prior studies indicate that these treatments release preservative components into the environment at a rate greater than or equal to that of CCA, but because their components have lower mammalian toxicity they are less likely to cause concern in residential applications. As the treated wood industry evolves, it is probable that a wider range of types and retentions of wood preservatives will become available, with the treatment more closely tailored to a specific type of construction application.

In recent years considerable progress has been made in elucidating wood decay mechanisms. This basic knowledge not only has the potential to develop alternative environmentally-benign wood preservatives, but may also impact other areas such as bioremediation and pulp and paper. This book will summarize the latest knowledge of the developments, potential impacts, and applications from some of the world's leading experts.

Wood Deterioration, Protection and Maintenance provides an up to date discussion of the natural durability of wood, wood degradation processes, and methods of structural and chemical protection of wood. Modern active substances in wood preservatives and the relationships between preservative properties, the anatomical structure and moisture content of wood and protective processes involving pressure and/or diffusion driving forces are fully illustrated.

An in-depth examination of deterioration caused by fungi and other microorganisms, Wood Microbiology explores the major damages to wood and wood products during growth, harvesting, storage, and conversion to finished lumber. The characteristics, causes, detection, effects, and control measures for wood damage are stressed. - Reviews characteristics, classification, and metabolism of fungi responsible for wood deterioration and discoloration - Examines the anatomical, structural, and chemical features of decay - Covers effects of decay on physical and structural properties of wood - Presents methods for preventing biodegradation and for preserving wood - Extensively classroom tested--suitable for a two-quarter or one-semester course - Each chapter contains a summary and detailed references

On cover: IPCS International Programme on Chemical Safety. Published under the joint sponsorship of the United Nations Environment Programme, the International Labour Organization and the World Health Organization, and produced within the framework of the Inter-organization Programme for the Sound Management of Chemicals (IOMC)

This book is exclusively concerned with wood modification, although many of these processes are generic and can be applied to other lignocellulosic materials. There have been many rapid developments in wood modification over the past decade and, in particular, there has been considerable progress made in the commercialisation of technologies. Topics covered include: The use of timber in the 21st century Modifying the properties of wood Chemical modification of wood: Acetic Anhydride Modification and reaction with other chemicals Thermal modification of wood Surface modification Impregnation modification Commercialisation of wood modification Environmental consideration and future developments This is the first time that a book has covered all wood modification technologies in one text. Although the book covers the main research developments in wood modification, it also puts wood modification into context and additionally deals with aspects of commercialisation and environmental impact. This book is very timely, because wood modification is undergoing huge developments at the present time, driven in part by environmental concerns regarding the use of wood treated with certain preservatives. There has been considerable commercial interest shown in wood modification over the past decade, with products based upon thermal modification, and furfurylation now being actively being marketed. The next few years will see the commercialisation of acetylation and impregnation modification. This is a new industry, but one that has enormous potential. This book will prove useful to all those with an interest in wood modification including researchers, technologists and professionals working in wood science and timber engineering, wood preservation, and well as professionals in the paper and pulp industries, and those with an interest in the development of renewable materials.

This book contains a collection of different biodegradation research activities where biological processes take place. The book has two main sections: A) Polymers and Surfactants Biodegradation and B) Biodegradation: Microbial Behaviour.