Wood as Raw Material: Source, Structure, Chemical Composition, Growth, Degradation and Identification focuses on the scientific advancements in general forestry. This book discusses the value of wood as a raw material as looked upon from biological, botanical, and technical perspective. Organized into 12 chapters, this book starts with an overview of the importance of forest trees as sources of wood. This text then examines the chemical composition and ultrastructure of wood. Other chapters explain the biological mechanisms of wood and bark formation by forest trees. This book discusses as well the certain fundamental relationships between tree growth and wood structure. The final chapter deals with wood identification in North America and European forest tree species. This book is a valuable resource for students engaged in the study of forest management, wood science and technology, tree physiology, silviculture, forest soils, forest genetics, forest engineering, pulp and paper technology, forest and wood pathology, and other specialized areas. Foresters and technologists will also find this book useful.

The United States produces 25% of the world's wood output, and wood supports a major segment of the U.S. industrial base. Trees provide fiber, resins, oils, pulp, food, paper, pharmaceuticals, fuel, many products used in home construction, and numerous other products. The use of wood as a raw material must consider production efficiencies and natural resource conservation as well as efficient, profitable use of solid wood, its residues, and by-products. To better assess the use of wood as a raw material, the U.S. Department of Agriculture's Forest Service asked the National Research Council's Board on Agriculture to bring together experts to review the analytical techniques used to follow the life-cycle of wood productionâ€"from tree to productâ€"and assess the environmental impacts. This resulting book provides a base of current knowledge, identifying what data are lacking, where future efforts should be focused, and what is known about the methodologies used to assess environmental impacts. The book also focuses on national and international efforts to develop integrated environmental, economic, and energy accounting methologies.

Trees are a major component of the biosphere and have played an important part in the world's history and culture. With the modern challenges of global warming and dwindling fossil fuel reserves, trees, and in particular their wood, can provide solutions. Unfortunately, too little is known about the biology of these plants, due largely to a lack of

Petroleum-based industrial products have gradually replaced products derived from biological materials. However, biologically based products are making a comebackâ€"because of a threefold increase in farm productivity and new technologies. Biobased Industrial Products envisions a biobased industrial future, where starch will be used to make biopolymers and vegetable oils will become a routine component in lubricants and detergents. Biobased Industrial Products overviews the U.S. land resources available for agricultural production, summarizes plant materials currently produced, and describes prospects for increasing varieties and yields. The committee discusses the concept of the biorefinery and outlines proven and potential thermal, mechanical, and chemical technologies for conversion of natural resources to industrial applications. The committee also illustrates the developmental dynamics of biobased products through existing examples, as well as products still on the drawing board, and it identifies priorities for research and development.

Results are reported of a preliminary investigation of feasibility of using wood residue to meet energy and raw material needs in the Pacific Coast States. Magnitude of needs was examined and volume of logging-residue and unused mill residue was estimated. Costs of obtaining and preprocessing logging residue for energy and pulp and particle board raw material were estimated and compared with selling values of mill residue fuel, pulp chips, and particle board. Marginally feasible energy use seemed best suited for inplant steam and power production by the wood industry, Although raw material selling values make wood residue use for products more attractive than for electric power generation, even these returns are seldom sufficient to meet the high costs of delivering logging residue for such use alone. Production of higher valued products or public absorption of extra costs of utilization can make these residue management alternatives more feasible.

Ötzi the iceman could not do without wood when he was climbing his Alpine glacier, nor could medieval cathedral-builders or today's construction companies. From time immemorial, the skill of the human hand has developed by working wood, so much so that we might say that the handling of wood is a basic element in the history of the human body. The fear of a future wood famine became a panic in the 18th century and sparked the beginnings of modern environmentalism. This book traces the cultural history of wood and offers a highly original account of the connection between the raw material and the human beings who benefit from it. Even more, it shows that wood can provide a key for a better understanding of history, of the pecularities as well as the varieties of cultures, of a co-evolution of nature and culture, and even of the rise and fall of great powers. Beginning with Stone Age hunters, it follows the twists and turns of the story through the Middle Ages and the Industrial Revolution to the global society of the twenty-first century, in which wood is undergoing a varied and unexpected renaissance. Radkau is sceptical of claims that wood is about to disappear, arguing that such claims are self-serving arguments promoted by interest groups to secure cheaper access to, and control over, wood resources. The whole forest and timber industry often strikes the outsider as a world unto itself, a hermetically sealed black box, but when we lift the lid on this box, as Radkau does here, we will be surprised by what we find within. Wide-ranging and accessible, this rich historical analysis of one of our most cherished natural resources will find a wide readership.

Modern forest products research had its start hardly fifty years ago. Today we are in a position to apply the title "wood science" to the field of wood technology that is based on scientific investigation, theoretical as well as experimental. It is this research that fosters new uses for wood as a raw material and that creates the foundation for new industries for the manufacture of wood-base materials such as plywood, laminated products, particle and fiber board and sand wich construction. Wood technology in its broadest sense combines the disciplines of wood anatomy, biology, chemistry, physics and mechanical technology. It is through this interdisciplinary approach that progress has been made in wood seasoning, wood preservation methods, wood machining, surfacing and gluing, and in the many other processes applied in its utilization. In 1936 the senior author published a book entitled, "Technologie des Holzes", which was a first approach to a universal reference book on wood technology. The first edition of Volume I of the Textbook of Wood Technology, co-authored by H. P. BROWN, A. J. P AN SHIN , and C. C. FORSAITH, was published in 1948. An indication of the rapid development of this field can be gained from the fact that the second edition of "Technologie des Holzes und der Holzwerkstoffe", completely revised, was needed by 1951. It contains 2233 pages compared with the 764 pages of the 1936 edition.

Wood Coatings addresses the factors responsible for the performance of wood coatings in both domestic and industrial situations. The term 'wood coatings' covers a broad range of products including stains, varnishes, paints and supporting ancillary products that may be used indoors or outdoors. Techniques for coating wood go back many centuries but in recent decades there has been a move towards more environmentally-friendly materials, for example, the use of water-borne rather than solvent-borne chemicals. A major objective of Wood Coatings is to explain the underlying factors that influence selection, application and general operational issues. Basic information on the chemistry and technology of coatings is included for the benefit of students and laboratory technicians. Additionally, the book includes individual chapters of interest to architects, specifiers, and industrial users. - Offers up-to-date guidance on current availability and usage of wood coatings - Provides the reader with a basic understanding of both coating and substrate interactions - Covers both architectural (trade and DIY) and industrial sectors

The updated seventh edition of the classic text on wood science and forestry The seventh edition of Forest Products and Wood Science: An Introduction offers a fully revised and updated review of the forest products industry. This classic text contains a comprehensive review of the subject and presents a thorough understanding of the anatomical and physical nature of wood. The authors emphasize its use as an industrial raw material. Forest Products and Wood Science provides thorough coverage of all aspects of wood science and industry, ranging from tree growth and wood anatomy to a variety of economically important wood products, along with their applications and performance. The text explores global raw materials, the increasing use of wood as a source of energy and chemicals and environmental implications of the use of wood. This edition features new material on structural composites, non-structural composites, durability and protection, pulp and paper, energy and chemicals, and global raw materials. This seventh edition of the classic work: Contains new information on a variety of topics including: structural composites, non-structural composites, durability and protection, pulp and paper, energy and chemicals and global raw materials Includes a fully revised text that meets the changing needs of the forestry, engineering, and wood science academics and professionals Presents material written by authors with broad experience in both the private and academic sectors Written for undergraduate students in forestry, natural resources, engineering, and wood science, as well as forest industry personnel, engineers, wood-based manufacturing and using professionals, the seventh edition of Forest Products and Wood Science updates the classic text that has become an indispensable resource.

Nonwood Plant Fibers for Pulp and Paper examines the use of nonwood plant fibers for pulp and paper, worldwide pulping capacity of nonwood fibers, categories of non-wood raw materials, problems associated with the utilization of non-wood fibers, pulping, bleaching, chemical recovery and papermaking of nonwood raw materials, the use of nonwood plant fibers in specific paper and paperboard grades, and the advantages and drawbacks of using nonwood fiber for papermaking and future prospects. This book gives professionals in the field the most up-to-date and comprehensive information on the state-of- the-art techniques and aspects involved in pulp and paper making from nonwood plant fibers. Provides comprehensive coverage on all aspects of pulping and papermaking of non-wood fibers Covers the latest science and technology in pulping and papermaking of non-wood fibers Focuses on biotechnological methods, a distinguishing feature of this book and its main attraction Presents valuable references related to the pulp and papermaking industry