This project was carried out by the Society of Fire Protection Engineers (SFPE) and was supported by the Department of Homeland Security's (DHS's) Science and Technology Directorate and the United States Fire Administration (USFA). SFPE is an engineering association for advancing the science and practice of fire protection engineering. Water supply is an important subject to the fire service, fire protection engineers, and city managers. These manuals (volumes I & II) are intended to provide a reference for concepts and terminology to facilitate communication and understanding among these organizations.

This project was performed by the Society of Fire Protection Engineers (SFPE) and was supported by the Department of Homeland Security's Science and Technology Directorate and the U.S. Fire Administration (USFA). SFPE is an engineering association for advancing the science and practice of fire protection engineering. Water supply is an important subject to the fire service, fire protection engineers, and city managers. These manuals (Volume 1: Water Supply System Concepts and Volume II: Water Supply Evaluation Methods) are intended to provide a reference for concepts and terminology to facilitate communication and understanding between these organizations.

Guidance for Professional Development in Drinking Water and Wastewater Industry recognises the water practitioners journey from the novice student phase all the way to an established expert position, both on technological and professional fronts. This book reviews various career phases and helps realise purpose, motivation, responsibilities and milestones for each professional stage. Since professional journeys are significantly different for individuals and designations, titles vary widely from organization to organization, general terminologies are used for describing career phases, mainly Student Phase, Entry-Level Professional, Mid-Level Professional and Established Practitioner. This guide helps the reader to understand a step-by-step professional development process in the industry and at the same time receive key inputs to minimise or avoid common mistakes related to the drinking water or wastewater occupations. The book provides an overview of common educational options available for students including short-term courses, diploma and certificates, associate degrees, bachelor degree, masters degree, doctorate degree, post-doctoral fellowship and continued education. With respect to job profiles, the guide covers different professional avenues such as consultant, engineer, designer, researcher, academic faculty member, sales and marketing, permitting authority staff, laboratory professionals, system operators, construction management staff, manufacturing and industry staff. In terms of technological knowledge, both drinking water and wastewater infrastructure systems are reviewed in the book. Discussions on drinking water systems mainly include intake structures, treatment systems, distributions network components whereas wastewater systems include collection and conveyance systems, treatment options and sludge management systems. Guidance for Professional Development in Drinking Water and Wastewater Industryis useful for every professional in the industry and particularly prospective students. It can be used by mentors and established practitioners as a guidance tool for training newcomers. Author: Archis Ambulkar, Harrisburg, PA, USA

Small communities violate federal requirements for safe drinking water as much as three times more often than cities. Yet these communities often cannot afford to improve their water service. Safe Water From Every Tap reviews the risks of violating drinking water standards and discusses options for improving water service in small communities. Included are detailed reviews of a wide range of technologies appropriate for treating drinking water in small communities. The book also presents a variety of institutional options for improving the management efficiency and financial stability of water systems.

Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.

Water utilities worldwide lose 128 billion cubic meters annually, causing annual monetary losses estimated at USD 40 billion. Most of these losses occur in developing countries (74%). This calls for rethinking the challenges facing water utilities in developing countries, foremost of which is the assessment of water losses in intermittent supply networks. Water loss assessment methods were originally developed in continuous supply systems, and their application in intermittently operated networks (in developing countries) is hindered by the widespread use of household water tanks and unauthorised consumption. This study provides an extensive review of existing methods and (software) tools for water loss assessment. In addition, several new methods were developed, which offer improved water loss assessment in intermittent supply. As the volume of water loss varies monthly and annually according to the amount of supplied water, this study proposes procedures to normalise the volume of water loss in order to enable water utilities to monitor and benchmark their performance on water loss management. The study also developed a novel method of estimating apparent losses using routine data of WWTP inflows, enabling future real-time monitoring of losses in networks. Different methods have also been suggested to estimate the unauthorised consumption in networks. This study found that minimum night flow analysis can still be applied in intermittent supply if an area of the network is supplied for several days. Furthermore, this study concluded that water meter performance is enhanced in intermittent supply conditions. However, continuous supply in the presence of float-valves significantly reduces the accuracy of water meters. Finally, this study provides guidance and highlights several knowledge gaps in order to improve the accuracy of water loss assessment in intermittent supply. Accurate assessment of water loss is a prerequisite for reliable leakage modelling and minimisation as well as planning for, and monitoring of water loss management in distribution networks.