Plates are integral parts of most engineering structures and their vibration analysis is required for safe design. Vibration of Plates provides a comprehensive, self-contained introduction to vibration theory and analysis of two-dimensional plates. Reflecting the author's more than 15 years of original research on plate vibration, this book present

This book is based on my experiences as a teacher and as a researcher for more than four decades. When I started teaching in the early 1950s, I became interested in the vibrations of plates and shells. Soon after I joined the Polytechnic Institute of Brooklyn as a professor, I began working busily on my research in vibrations of sandwich and layered plates and shells, and then teaching a graduate course on the same subject. Although I tried to put together my lecture notes into a book, I never finished it. Many years later, I came to the New Jersey Institute of Technology as the dean of engineering. When I went back to teaching and looked for some research areas to work on, I came upon laminated composites and piezoelectric layers, which appeared to be natural extensions of sandwiches. Working on these for the last several years has brought me a great deal of joy, since I still am able to find my work relevant. At least I can claim that I still am pursuing life-long learning as it is advocated by educators all over the country. This book is based on the research results I accumulated during these two periods of my work, the first on vibrations and dynamical model ing of sandwiches, and the second on laminated composites and piezoelec tric layers.

Vibrations drive many engineering designs in today's engineering environment. There has been an enormous amount of research into this area of research over the last decade. This book documents some of the latest research in the field of vibration of composite shells and plates filling a much-needed gap in the market. Laminated composite shells have many engineering applications including aerospace, mechanical, marine and automotive engineering. This book makes an ideal reference for researchers and practicing engineers alike. - The first book of its kind - Documents 10 years of research in the field of composite shells - Many Engineering applications

Over the last several years, the four authors have jointly conducted research into the analysis of vibrating Mindlin plates as a collaborative project between Nanyang Technological University, The National University of Singapore, and The University of Queensland. The research was prompted by the fact that there is a dearth of vibration results for Mindlin plates when compared to classical thin plate solutions. To generate the vibration results, the authors have successfully employed the Ritz method for general plate shapes and boundary conditions. The Ritz method, once thought to be awkward for general plate analysis, can be automated through suitable trial functions (for displacements) that satisfy the geometric plate boundary conditions a priori. This work has been well-received by academics and researchers, as indicated by the continual requests for the authors' papers and the Ritz software codes. This monograph is written with the view to share this so-called p-Ritz method for the vibration analysis of Mindlin plates and its software codes with the research community. To the authors' knowledge, the monograph contains the first published Ritz plate software codes of its kind.

With Over 60 tables, most with graphic illustration, and over 1000 formulas, Formulas for Dynamics, Acoustics, and Vibration will provide an invaluable time-saving source of concise solutions for mechanical, civil, nuclear, petrochemical and aerospace engineers and designers. Marine engineers and service engineers will also find it useful for diagnosing their machines that can slosh, rattle, whistle, vibrate, and crack under dynamic loads.

With increasingly sophisticated structures involved in modern engineering, knowledge of the complex vibration behavior of plates, shells, curved membranes, rings, and other complex structures is essential for today‘s engineering students, since the behavior is fundamentally different than that of simple structures such as rods and beams. Now in its

Vibration of Functionally Graded Beams and Plates uses numerically efficient computational techniques to analyze vibration problems associated with FG beams and plates. Introductory material on FG materials and structural members, as well as a range of vibration and shear deformation theories are discussed, providing a valuable summary of these broader themes. The latest research and analysis of vibration in FG materials is presented in an application-oriented manner, linking the research to its importance in fields such as aerospace, nuclear power, and automotive engineering. The book also features research on the complicating effects of thermal environments, piezoelectricity, and elastic foundations. The innovative computational procedures and simulation results are shown in full throughout, providing a uniquely valuable resource for users of numerical modeling software. This book is essential reading for any researcher or practitioner interested in FG materials, or the design of technology for the nuclear power, aerospace, and automotive industries. - Defines the basic preliminaries of vibration and FG materials - Introduces historical background and recent developments in functionally graded materials with references for further reading - Shows computational procedures with simulation results - Includes many easy to understand example problems - Presents various analytical and numerical procedures for each solution

The elegance and logic of the superposition method have made it a highly attractive analytical procedure for obtaining accurate mathematical solutions to plate vibration problems. Its applicability to vast families of these problems, ranging from the dynamic behaviour of isotropic and orthotropic plates to laminated plate behaviour, is well demonstrated in the technical literature.Now, at last, a comprehensive book is made available to those who wish to use this powerful analytical technique. Beginning with a thorough and lucid introduction to the superposition method as it applies to free vibration of thin isotropic rectangular plates, with all combinations of classical boundary conditions, the book describes procedures for handling vast families of realistic practical plate vibration problems. These include orthotropic plates, point-supported plates, plates resting on elastic edge supports, plates with in-plane forces, buckling of plates, etc. The reader is subsequently introduced to utilization of the superposition method for the analysis of thick Mindlin plates as well as transverse-shear-deformable laminated plates. Particular emphasis is placed on plate free vibration analysis, with a list of pertinent publications attached to each chapter.The superposition method is unique in that all solutions obtained satisfy the governing differential equations exactly throughout the entire domain of the plate. The boundary conditions are satisfied to any desired degree of accuracy.Despite the attractive features of this analytical method, many researchers and designers have access only to published papers related to particular problems. With this new book, they have for the first time a comprehensive, illustrated description of the means of exploiting the superposition method. They will be able to prepare their own computer schemes and analyse any plate vibration problem of interest.

This book is written primarily for professional engineers interested in designing plate and shell structures. It covers basic aspects of theories and gives examples for the design of components due to internal and external loads as well as other loads, such as wind and dead loads. Various derivations are kept relatively simple and the resultant equations are simplified to a level where the engineer can apply them directly to design problems. More elaborate derivations and more general equations can be found in the literature for those interested in a more in-depth knowledge of the theories of plates and shells. The examples given throughout this book are intended to show the engineer the level of analysis needed to achieve a safe design based on a given required degree of accuracy. This book is also appropriate for advanced engineering courses.

The first contemporary text specializing on the dynamic problems of piezoelectric crystal plates for resonant acoustic wave devices (such as resonators, filters, and sensors) since H F Tiersten''s publication in 1969. This book provides an up-to-date, systematic and comprehensive presentation of theoretical results on waves and vibrations in quartz crystal plates. It expounds on the application of the theories of elasticity and piezoelectricity in acoustic wave devices made from crystal plates through a coverage spanning from classical results on acoustic wave resonators, up to present-day applications in acoustic wave sensors.This text begins with the exposition of the simplest thickness modes and various frequency effects in them due to electrodes, mass loading, contact with fluids, air gaps, etc., and continues on to the more complicated shear-horizontal modes, as well as straight-crested modes varying along the digonal axis of rotated Y-cut quartz. Modes varying in both of the in-plane directions of crystal plates are also addressed.The analysis within are based on the three-dimensional theories of piezoelectricity and anisotropic elasticity with various approximations when needed. Both free vibration modes (stationary waves) and propagating waves are studied in this text. Forced vibration is also treated in a few places.This book is intended to serve as an informative reference to personnel who employ piezoelectric crystal plates in the course of their profession.