model. They conclude that the models using three fitting parameters provide the best fit over a wide range of suctions. Models for soil-water characteristic curves are only useful if we have experimental data on which to base them. Agus, Leong and Rahardjo (Singapore) present a large number of experimental soil-water characteristic curves determined for two types of residual soil from Sigapore. They present data for eight different sites. This data set allows them to relate the parameters of the soil-water characteristic curves to index properties. They conclude that the relationships derived are suitable to pro vide a quick preliminary estimate of a soil-water characteristic curve. The importance of soil-water characteristic curves is emphasized by another con tribution dealing with this topic. Aung, Rahardjo, Leong and Toll (Singapore) inves tigate the relationship between mercury intrusion porosimetry measurements and soil-water characteristic curves. The porosimetry measurements are presented as soil-air characteristic curves. The slopes of the soil-air characteristic curves are found to be similar to the slopes of the soil-water characteristic curves. The equiv alent pore diameters calculated from the mercury entry value and the air entry value appear to be related. Therefore, it is suggested that porosimetry data can be used to construct an estimate of the soil-water characteristic curve.

The definitive guide to unsaturated soil— from the world's experts on the subject This book builds upon and substantially updates Fredlund and Rahardjo's publication, Soil Mechanics for Unsaturated Soils, the current standard in the field of unsaturated soils. It provides readers with more thorough coverage of the state of the art of unsaturated soil behavior and better reflects the manner in which practical unsaturated soil engineering problems are solved. Retaining the fundamental physics of unsaturated soil behavior presented in the earlier book, this new publication places greater emphasis on the importance of the "soil-water characteristic curve" in solving practical engineering problems, as well as the quantification of thermal and moisture boundary conditions based on the use of weather data. Topics covered include: Theory to Practice of Unsaturated Soil Mechanics Nature and Phase Properties of Unsaturated Soil State Variables for Unsaturated Soils Measurement and Estimation of State Variables Soil-Water Characteristic Curves for Unsaturated Soils Ground Surface Moisture Flux Boundary Conditions Theory of Water Flow through Unsaturated Soils Solving Saturated/Unsaturated Water Flow Problems Air Flow through Unsaturated Soils Heat Flow Analysis for Unsaturated Soils Shear Strength of Unsaturated Soils Shear Strength Applications in Plastic and Limit Equilibrium Stress-Deformation Analysis for Unsaturated Soils Solving Stress-Deformation Problems with Unsaturated Soils Compressibility and Pore Pressure Parameters Consolidation and Swelling Processes in Unsaturated Soils Unsaturated Soil Mechanics in Engineering Practice is essential reading for geotechnical engineers, civil engineers, and undergraduate- and graduate-level civil engineering students with a focus on soil mechanics.

Unsaturated Soil Mechanics is the first book to provide a comprehensive introduction to the fundamental principles of unsaturated soil mechanics. * Offers extensive sample problems with an accompanying solutions manual. * Brings together the rapid advances in research in unsaturated soil mechanics in one focused volume. * Covers advances in effective stress and suction and hydraulic conductivity measurement.

Written by a leader on the subject, Introduction to Geotechnical Engineering is first introductory geotechnical engineering textbook to cover both saturated and unsaturated soil mechanics. Destined to become the next leading text in the field, this book presents a new approach to teaching the subject, based on fundamentals of unsaturated soils, and extending the description of applications of soil mechanics to a wide variety of topics. This groundbreaking work features a number of topics typically left out of undergraduate geotechnical courses.

The principles and concepts for unsaturated soils are developed as extensions of saturated soils. Addresses problems where soils have a matric suction or where pore-water pressure is negative. Covers theory, measurement and use of the fundamental properties of unsaturated soils--permeability, shear strength and volume change. Includes a significant amount of case studies.

Analytical and comprehensive, this state-of-the-art book, examines the mechanics and engineering of unsaturated soils, as well as explaining the laboratory and field testing and research that are the logical basis of this modern approach to safe construction in these hazardous geomaterials; putting them into a logical framework for civil engineerin

Residual soils are found in many parts of the world. Like other soils, they are used extensively in construction, either to build upon, or as construction material. They are formed when the rate of rock weathering is more rapid than transportation of the weathered particles by e.g., water, gravity and wind, which results in a large share of the soils formed remaining in place. The soils typically retain many of the characteristics of the parent rock. In a tropical region, residual soil layers can be very thick, sometimes extending to hundreds of meters before reaching un-weathered rock. Unlike the more familiar transported sediment soil, the engineering properties and behaviour of tropical residual soils may vary widely from place to place depending upon the rock of origin and the local climate during their formation; and hence are more difficult to predict and model mathematically. Despite their abundance and significance our knowledge and understanding of these soils is not as extensive as that of transported sediment soil. Written by residual soil specialists from various parts of the world, this unique handbook presents data, knowledge and expertise on the subject. It provides insight into the engineering behaviour of tropical residual soils, which will be applicable to small or extensive construction works worldwide on such soils. This book covers almost all aspects of residual soils, from genesis, classification, formation, sampling and testing to behaviour of weakly bonded and unsaturated soil, volume change and shear strength. It features chapters on applications in slopes and foundation, as well as dedicated parts on residual soils in India, Hong Kong and Southeast Asia. A large number of graphs, tables, maps and references throughout the text provide further detail and insight. This volume is intended as a reference guide for practitioners, researchers and advanced students in civil, construction and geological engineering. Unique in its coverage of the subject, it may serve as a standard that benefits every engineer involved in geological, foundation and construction work in tropical residual soils.

Clay behaviour is affected by coupled mechanical and chemical processes occurring in them at various scales. The peculiar chemical and electro-chemical properties of clays are the source of many undesired effects. These papers provide insight into the variables controlling clay behaviour.

Unsaturated Soils: Advances in Geo-Engineering comprises 136 contributions from leading international researchers and practitioners, presented at the First European Conference on Unsaturated Soils (Durham, UK, 2-4 July 2008). The papers report on the latest advances in geo-engineering aspects of unsaturated soils. It is the first collection to focu

This book is the second volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. This conference showcased the recent advances and technology in geotechnical engineering, geoenvironmental engineering and transportation engineering. This volume, entitled “Multi-physics Processes in Soil Mechanics and Advances in Geotechnical Testing”, covers a wide range of topics in soil mechanics, focusing on the behaviours of partially saturated soils, combined effects of multi-physics processes in geological materials and systems, and emerging methods and techniques in geotechnical in-situ testing and monitoring. This book may benefit researchers and scientists from the academic fields of soil and rock mechanics, geotechnical engineering, geoenvironmental engineering, transportation engineering, geology, mining and energy, as well as practical engineers from the industry. Each of the papers included in this book received at least two positive peer reviews. The editors would like to express their sincerest appreciation to all of the anonymous reviewers all over the world, for their diligent work.