During the 2010 EFORT Congress in Madrid, many interesting topics relating to tribology in total hip arthroplasty were discussed during a special day devoted entirely to the subject. So successful was the day, and such was the broad interest in the discussions, that EFORT decided that publication of all the presentations would be warmly welcomed by fellow professionals who were unable to attend. This book is the result. It includes detailed information on the different articulating materials and the wear to which they are subject. The various factors that contribute to bearing performance and control wear are thoroughly evaluated, and careful consideration is given to the technology and design solutions proposed with a view to producing low-wearing hip joints. This book will be of interest both to novices who want to learn more about the field and to experienced orthopaedic surgeons wishing to keep abreast of the latest developments.

Total hip arthroplasty, the most commonly performed orthopedic procedure, is used to replace or reconstruct the hip with an artificial joint. Perspectives in Total Hip Arthroplasty outlines developments in technologies and biomaterials used for this procedure, with a focus on the tribological interactions of the materials used. Part one outlines the history of total hip arthroplasty and goes on to explore advances in techniques and biomaterials. Part two focuses on the tribology of materials used to perform this procedure, explaining the impact of wear on the load-bearing surface, a major cause of failure in hip prostheses. Chapters review a range of materials, including modern biomaterials, hybrid materials, metal, ceramic, and polyethylene. The book also discusses the tribological interactions of these materials when used in total hip arthroplasty. Perspectives in Total Hip Arthroplasty is a key resource for clinicians, researchers, and academics interested in the tribology of total hip arthroplasty, as well as materials researchers, engineers, and academics concerned with the tribology of biomaterials. - Covers techniques from innovative surgeons and designs from multinational manufacturers, as well as information on improvements in technologies and biomaterials - Discusses the tribology of all the major materials used in total hip arthroplasty

Wear and osteolysis are still the most important potential problems in total hip and knee arthroplasty. Although technology in arthroplasty has been improved dramatically during the past decade, the clinical data relating to some implants reveal that many concerns remain. During the “Tribology Day” within the scientific programme of the 2013 EFORT Congress in Istanbul, the main topics included these concerns as well as the benefits of the materials most commonly used in total hip and knee arthroplasty. This book includes the presentations delivered on the day and covers a range of interesting issues regarding metal, ceramic, and polyethylene articulations. It provides information on the current concepts relating to tribology in total hip arthroplasty and offers a critical outlook on possible improvements in total knee arthroplasty.

The third edition of Joint Replacement Technology provides a thoroughly updated review of recent developments in joint replacement technology. Joint replacement is a standard treatment for joint degradation and has improved the quality of life of millions of patients. Collaboration between clinicians and researchers is critical to its continued success and to meet the rising expectations of patients and surgeons.This edition covers a range of updated and new content, ranging from chapters on materials analysis and selection, to methodologies and techniques used for joint replacement and clinical challenges of replacing specific joints. Key topics include tribological considerations and experiments; challenges in joint bearing surfaces; cementless fixation techniques; healing responses to implants. Clinical challenges and perspectives are covered with the aid of case studies.Thanks to its widespread collaboration and international contributors, Joint Replacement Technology, Third Edition is useful for materials scientists and engineers in both academia and the biomedical industry. Chemists, clinicians, and other researchers in this area will also find this text invaluable. - This third edition provides an updated comprehensive review of recent developments in joint replacement technology - Reviews a range of specific joints, biological and mechanical issues and fixation techniques - Includes revised and new content, such as sections on regulatory affairs, AI techniques and 3D printing

During the 2010 EFORT Congress in Madrid, many interesting topics relating to tribology in total hip arthroplasty were discussed during a special day devoted entirely to the subject. So successful was the day, and such was the broad interest in the discussions, that EFORT decided that publication of all the presentations would be warmly welcomed by fellow professionals who were unable to attend. This book is the result. It includes detailed information on the different articulating materials and the wear to which they are subject. The various factors that contribute to bearing performance and control wear are thoroughly evaluated, and careful consideration is given to the technology and design solutions proposed with a view to producing low-wearing hip joints. This book will be of interest both to novices who want to learn more about the field and to experienced orthopaedic surgeons wishing to keep abreast of the latest developments.

Doody Rating : 3 stars : Editor has put together well-known international Orthopaedic surgeons across the globe for writing down their experience in Hip Arthroplasty. There is extensive bibliography after each chapter which serve as reference material for further research. This book is from the series of Mastering Orthopedic Techniques. This is a comprehensive text for surgeons doing total hip replacement with step-by-step colored illustrations. Detailed descriptions for every possible surgical approach for total hip replacement. Topic covered in the chapters include cover cementation on both.

Joint replacement surgery has seen remarkable progress and development in recent years both in prostheses and in surgical technique. A prime concern has been improved durability, for which a major factor is reduction of the polyethylene wear that leads to osteolysis. This book presents an update on the means by which the problems of wear and loosening are being addressed in total hip arthroplasty (THA) and total knee arthroplasty (TKA). Included are chapters on new surgical techniques for difficult cases, nonpolyethylene interfaces for THA, custom hip prostheses, and computer-assisted surgery. Arthroplasty 2000 also takes up current controversial issues such as posterior cruciate substitution versus retention in TKA. With contributions by eminent specialists in total joint replacement in Asia, Europe, and North America, this volume is a valuable reference for all orthopedic surgeons.

Tribology is emerging from the realm of steam engines and crank-case lubricants and becoming key to vital new technologies such as nanotechnology and MEMS. Wear is an integral part of tribology, and an effective understanding and appreciation of wear is essential in order to achieve the reliable and efficient operation of almost any machine or device. Knowledge in the field has increased considerably over recent years, and continues to expand: this book is intended to stimulate its readers to contribute towards the progress of this fascinating subject that relates to most of the known disciplines in physical science. Wear – Materials, Mechanisms and Practice provides the reader with a unique insight into our current understanding of wear, based on the contributions of numerous internationally acclaimed specialists in the field. Offers a comprehensive review of current knowledge in the field of wear. Discusses latest topics in wear mechanism classification. Includes coverage of a wide variety of materials such as metals, polymers, polymer composites, diamonds, and diamond-like films and ceramics. Discusses the chemo-mechanical linkages that control tribology, providing a more complete treatment of the subject than just the conventional mechanical treatments. Illustrated throughout with carefully compiled diagrams that provide a unique insight into the controlling mechanisms of tribology. The state of the art research on wear and the mechanisms of wear featured will be of interest to post-graduate students and lecturers in engineering, materials science and chemistry. The practical applications discussed will appeal to practitioners across virtually all sectors of engineering and industry including electronic, mechanical and electrical, quality and reliability and design.

This open access book describes and illustrates the surgical techniques, implants, and technologies used for the purpose of personalized implantation of hip and knee components. This new and flourishing treatment philosophy offers important benefits over conventional systematic techniques, including component positioning appropriate to individual anatomy, improved surgical reproducibility and prosthetic performance, and a reduction in complications. The techniques described in the book aim to reproduce patients’ native anatomy and physiological joint laxity, thereby improving the prosthetic hip/knee kinematics and functional outcomes in the quest of the forgotten joint. They include kinematically aligned total knee/total hip arthroplasty, partial knee replacement, and hip resurfacing. The relevance of available and emerging technological tools for these personalized approaches is also explained, with coverage of, for example, robotics, computer-assisted surgery, and augmented reality. Contributions from surgeons who are considered world leaders in diverse fields of this novel surgical philosophy make this open access book will invaluable to a wide readership, from trainees at all levels to consultants practicing lower limb surgery