Tribology: a systems approach to the science and technology of friction, lubrication, and wear

The interdisciplinary nature of tribology encompasses knowledge drawn from disciplines such as mechanical engineering, materials science, chemistry and physics. The interaction between these different fields of knowledge to achieve the final result, the control of friction and wear, is reviewed in this volume. This interdisciplinary approach has proven to be a very successful way of analysing friction and wear problems. In many cases tribology is viewed as an inaccessible subject which does not produce useful answers. In this volume the authors redress this problem by providing a comprehensive treatment of the subject. A basic feature of the book is the emphasis on describing various concepts in an accessible manner for the benefit of non-specialists. This principle is applied from the beginning of the book, where the reader is introduced to the fundamental concept of tribology. This concept is then often used to show how the various topics in tribology are interrelated to form one coherent subject. A direct graphical illustration of the mechanisms controlling tribological phenomena is presented. Carefully prepared diagrams allow rapid appreciation of the basic ideas and facts in tribology. The numerical analysis of hydrodynamic lubrication is supported by a number of computer programs which are included in the book. The control of wear is given extensive treatment with a thorough discussion of lubricant additives, solid lubricants and surface coatings. The effectiveness of coatings in suppressing specific forms of wear is analyzed together with the methods of coatings deposition. The book contains 474 figures and 44 tables. More than 1000 references are provided to give the reader access to more specialized information if required. The volume is intended to provide graduates in engineering or materials science with an understanding of the fundamental concepts of friction, wear and lubrication.

This SME classic is both a reference book for the working engineer and a textbook for the mining student. This hardcover edition gives a brief history of surface mining and a general overview of the state of surface mining today--topics range from production and productivity to technological developments and trends in equipment. This extremely useful text takes the approach that exploration and mining geologists must be expert in a number of fields, including basic finance and economics, logistics, and pragmatic prospecting. Readers will find material on all these topics and more. The book's nine chapters include: Introduction, Exploration and Geology Techniques, Ore Reserve Estimation, Feasibility Studies and Project Financing, Planning and Design of Surface Mines, Mine Operations, Mine Capital and Operating Costs, Management and Organization, and Case Studies. The book is fully indexed.

Tribology covers the fundamentals of tribology and the tribological response of all types of materials, including metals, ceramics, and polymers. The book provides a solid scientific foundation without relying on extensive mathematics, an approach that will allow readers to formulate appropriate solutions when faced with practical problems. Topics considered include fundamentals of surface topography and contact, friction, lubrication, and wear. The book also presents up-to-date discussions on the treatment of wear in the design process, tribological applications of surface engineering, and materials for sliding and rolling bearings. Tribology will be valuable to engineers in the field of tribology, mechanical engineers, physicists, chemists, materials scientists, and students. Features Provides an excellent general introduction to the friction, wear, and lubrication of materials Presents a balanced comparison of the tribological behavior of metals, ceramics, and polymers Includes discussions on tribological applications of surface engineering and materials for sliding and rolling bearings Emphasizes the scientific foundation of tribology Discusses the treatment of wear in the design process Uses SI units throughout and refers to U.S., U.K., and other European standards and material designations

Recent research has led to a deeper understanding of the nature and consequences of interactions between materials on an atomic scale. The results have resonated throughout the field of tribology. For example, new applications require detailed understanding of the tribological process on macro- and microscales and new knowledge guides the rational

Friction, lubrication, adhesion, and wear are prevalent physical phenomena in everyday life and in many key technologies. This book explains how these tribological phenomena originate from atomistic and microscale physical phenomena and shows how this understanding can be used to solve macroscale tribology problems. The book is intended to serve both as a textbook for advanced undergraduate and graduate courses in tribology and as an introduction to the field for those scientists and engineers working with technologies where a good grasp of tribology is essential.

The word tribology was fIrst reported in a landmark report by P. Jost in 1966 (Lubrication (Tribology)--A Report on the Present Position and Industry's Needs, Department of Education and Science, HMSO, London). Tribology is the science and technology of two interacting surfaces in relative motion and of related subjects and practices. The popular equivalent is friction, wear and lubrication. The economic impact of the better understanding of tribology of two interacting surfaces in relative motion is known to be immense. Losses resulting from ignorance of tribology amount in the United States alone to about 6 percent of its GNP or about $200 billion dollars per year (1966), and approximately one-third of the world's energy resources in present' use, appear as friction in one form or another. A fundamental understanding of the tribology of the head-medium interface in magnetic recording is crucial to the future growth of the $100 billion per year information storage industry. In the emerging microelectromechanical systems (MEMS) industry, tribology is also recognized as a limiting technology. The advent of new scanning probe microscopy (SPM) techniques (starting with the invention of the scanning tunneling microscope in 1981) to measure surface topography, adhesion, friction, wear, lubricant-fIlm thickness, mechanical properties all on a micro to nanometer scale, and to image lubricant molecules and the availability of supercomputers to conduct atomic-scale simulations has led to the development of a new fIeld referred to as Microtribology, Nanotribology, or Molecular Tribology (see B. Bhushan, J. N. Israelachvili and U.

A fully updated version of the popular Introduction to Tribology, the second edition of this leading tribology text introduces the major developments in the understanding and interpretation of friction, wear and lubrication. Considerations of friction and wear have been fully revised to include recent analysis and data work, and friction mechanisms have been reappraised in light of current developments. In this edition, the breakthroughs in tribology at the nano- and micro- level as well as recent developments in nanotechnology and magnetic storage technologies are introduced. A new chapter on the emerging field of green tribology and biomimetics is included. Introduces the topic of tribology from a mechanical engineering, mechanics and materials science points of view Newly updated chapter covers both the underlying theory and the current applications of tribology to industry Updated write-up on nanotribology and nanotechnology and introduction of a new chapter on green tribology and biomimetics

Friction and Wear of Materials Second Edition Written by one of the world’s foremost authorities on friction, this classic book offers a lucid presentation of the theory of mechanical surface interactions as it applies to friction, wear, adhesion, and boundary lubrication. To aid engineers in design decisions, Friction and Wear of Materials evaluates the properties of materials which, under specified conditions, cause one material to function better as a bearing material than another. Featured also are thorough treatments of lubricants and the sizes and shapes of wear particles. This updated Second Edition includes new material on erosive wear, impact wear, and friction. Professor Rabinowicz’s book will be especially welcomed by mechanical and design engineers, surface scientists, tribologists and others who design, produce and operate products, machines and equipment which involve friction and its effects.

Solid Lubrication Fundamentals and Applications description of the adhesion, friction, abrasion, and wear behavior of solid film lubricants and related tribological materials, including diamond and diamond-like solid films. The book details the properties of solid surfaces, clean surfaces, and contaminated surfaces as well as discussing the structu