Now edited by J. Dean Minford, a noted researcher in the field, Volume 7 of the Treatise on Adhesion and Adhesives presents complete coverage of commercially preferred adhesives and surface pre-treatments for joining wood and wood derivatives, rubbers and elastomers, plastics and titanium. Originally published in 1991.

Over the last decade, or so, the growth in the use of adhesives, especially in ever more technically demanding applications, has been rapid and many major developments in the technology of adhesives have been reported. This growth has also led to attention being focused on somewhat more basic studies of the science of adhesion and adhesives, and in recent years our level of fundamental knowledge concerning the formation and mechanical performance of adhesive joints has increased dramatically. Such studies have, of course, been aided greatly by the development of the tools at the disposal of the investigators. For example, specific surface analytical techniques, such as X-ray photoelectron and secondary-ion mass spectroscopy, and the increasingly sophisticated methods of stress analysis and fracture mechanics have been put to good use in furthering our understanding of the science of adhesion and adhesives. The present book attempts to review the multidisciplined subject of adhesion and adhesives, considering both the science and technology involved in the formation and mechanical performance of adhesive joints. The author would like to thank his friends and colleagues for useful discus sions and help in the preparation of this book. I am particularly grateful to P. Cawley, J. Comyn, W. A. Lees, A. C. Roulin-Moloney, W. C. Wake, J. G. Williams and R. J. Young who have read and commented on various chapters and P. Farr for preparing the diagrams.

This book describes, in clear, understandable language, the three main disciplines of adhesion technology:

The Handbook of Adhesive Technology, Second Edition exceeds the ambition of its bestselling forerunner by reexamining the mechanisms driving adhesion, categories of adhesives, techniques for bond formation and evaluation, and major industrial applications. Integrating modern technological innovations into adhesive preparation and application, this greatly expanded and updated edition comprises a total of 26 different adhesive groupings, including three new classes. The second edition features ten new chapters, a 40-page list of resources on adhesives, and abundant figures, tables, equations.

The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.

Adhesives are indispensable. They are required pling agents, and other key ingredients. Special in myriad products-aircraft and abrasives, cars attention is given to such flourishing categories and cartons, shoes and safety glass, tape and as acrylics, anaerobics, cyanoacrylates, poly urethanes, epoxy resins, polyvinyl acetate, high tires. This Third Edition of Handbook of Ad hesives, like the 1962 and 1977 editions, seeks temperature adhesives, hot melts, silicones, and to provide the knowledge needed for optimum silanes. selection, preparation, and utilization of adhe The last 14 chapters, on adherends and bond sives and sealants. The information is detailed ing technology, involve the auto industry, air and explicit, with several hundred illustrative craft, electronics, the bonding of wood, formulations. textiles, rubber and plastics, construction, ab Expert information has been supplied in 47 rasives, pressure-sensitives, nonwovens, and chapters written by 70 industry specialists, pro sealants. Mechanical handling of two-compo fessors, and consultants. Five chapters on fun nent systems is examined. The concluding damentals provide the theoretical and economic chapter highlights the exciting progress that is underpinnings-why adhesives work, how they being made in the use of robotics to apply ad are selected, how the surface is prepared, how hesives, techniques already far advanced in au they are applied, how they are set, how the tomotive assembly. cured joint is tested.

This book is based on the 13 review articles written by subject experts and published in 2014 in the Journal Reviews of Adhesion and Adhesives. The rationale for publication of this book is that currently the RAA has limited circulation, so this book provides broad exposure and dissemination of the concise, critical, illuminating, and thought-provoking review articles. The subjects of the reviews fall into 4 general areas: 1. Polymer surface modification 2. Biomedical, pharmaceutical and dental fields 3. Adhesives and adhesive joints 4. General Adhesion Aspects The topics covered include: Adhesion of condensed bodies at microscale; imparting adhesion property to silicone material; functionally graded adhesively bonded joints; synthetic adhesives for wood panels; adhesion theories in wood adhesive bonding; adhesion and surface issues in biocomposites and bionanocomposites; adhesion phenomena in pharmaceutical products and applications of AFM; cyanoacrylate adhesives in surgical applications; ways to generate monosort functionalized polyolefin surfaces; nano-enhanced adhesives; bonding dissimilar materials in dentistry; flame treatment of polymeric materials—relevance to adhesion; and mucoadhesive polymers for enhancing retention of ocular drug delivery.