Phase transformations are among the most intriguing and technologically useful phenomena in materials, particularly with regard to controlling microstructure. After a review of thermodynamics, this book has chapters on Brownian motion and the diffusion equation, diffusion in solids based on transition-state theory, spinodal decomposition, nucleation and growth, instabilities in solidification, and diffusionless transformations. Each chapter includes exercises whose solutions are available in a separate manual. This book is based on the notes from a graduate course taught in the Centre for Doctoral Training in the Theory and Simulation of Materials. The course was attended by students with undergraduate degrees in physics, mathematics, chemistry, materials science, and engineering. The notes from this course, and this book, were written to accommodate these diverse backgrounds.

For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).

This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.

The terms phase transitions and phase transformations are often used in an interchangeable manner in the metallurgical literature. In Phase Transformations, transformations driven by pressure changes, radiation and deformation and those occurring in nanoscale multilayers are brought to the fore. Order-disorder transformations, many of which constitute very good examples of continuous transformations, are dealt with in a comprehensive manner. Almost all types of phase transformations and reactions that are commonly encountered in inorganic materials are covered and the underlying thermodynamic, kinetic and crystallographic aspects elucidated. - Shows readers the advancements in the field - due to enhanced computing power and superior experimental capability - Drawing upon the background and the research experience of the authors, bringing together a wealth of experience - Written essentially from a physical metallurgists view point

In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.

A clear, concise and rigorous textbook covering phase transitions in the context of advances in electronic structure and statistical mechanics.

Written by a world-renowned expert, this text addresses both theoretical and practical aspects of phase transformation in alloys. It examines change in atomic structure and morphology caused by ordering, strain-induced ordering, strain-controlled decomposition, and strain-induced coarsening, applying solid-state theoretical concepts to structure problems. 1983 edition.

Solidification and Solid-State Transformations of Metals and Alloys describes solidification and the industrial problems presented when manufacturing structural parts by casting, or semi-products for forging, in order to obtain large, flat or specifically shaped parts. Solidification follows the nucleation and growth model, which will also be applied in solid-state transformations, such as those taking place because of changes in solubility and allotropy or changes produced by recrystallization. It also explains the heat treatments that, through controlled heating, holding and cooling, allow the metals to have specific structures and properties. It also describes the correct interpretation of phase diagrams so the reader can comprehend the behaviour of iron, aluminium, copper, lead, tin, nickel, titanium, etc. and the alloys between them or with other metallic or metalloid elements. This book can be used by graduate and undergraduate students, as well as physicists, chemists and engineers who wish to study the subject of Metallic Materials and Physical Metallurgy, specifically industrial applications where casting of metals and alloys, as well as heat treatments are relevant to the quality assurance of manufacturing processes. It will be especially useful for readers with little to no knowledge on the subject, and who are looking for a book that addresses the fundamentals of manufacturing, treatment and properties of metals and alloys. - Uses theoretical formulas to obtain realistic data from industrial operations - Includes detailed explanations of chemical, physical and thermodynamic phenomena to allow for a more accessible approach that will appeal to a wider audience - Utilizes micrographs to illustrate and demonstrate different solidification and transformation processes

In attending to surfaces, as they wrap, layer and grow within sentient bodies, material formations and cosmological states, this volume presents a series of ten anthropological studies stretching across five continents and in observation of earthly practices of making, knowing, living and dying. Through theoretically reflecting on time spent with Aymara and Mapuche Andean cultures; the Malagasy people of Madagascar; craftspeople and designers across Europe and Oceania; amongst the architectures of Australia and South Korea and within the folds of books, screens, landscape and the sea, the anthropologists in this volume communicate diverse ways of considering, working with and knowing surfaces. Together, these writings advance a knowledge of the world which resists any definitive settlement of existential categories and rather seeks to know the world in its emergence and transformation, as entities grow, cohere, shift, dissolve, decay and are reborn through the contact and exchange of surfaces, persisting with varying time, power and effect. The book principally invites readers from anthropology, the creative arts and environmental studies, but also across the wider humanities and social sciences as well as those in neighbouring scientific fields of archaeology, biology, geography, geoscience, material science, neurology and psychology interested in the intersections of mind, body, materials and world.

Developed by the late metallurgy professor and master experimentalist Hubert I. Aaronson, this collection of lecture notes details the fundamental principles of phase transformations in metals and alloys upon which steel and other metals industries are based. Mechanisms of Diffusional Phase Transformations in Metals and Alloys is devoted to solid-s