In the reauthorization of the Clean Water Act in 1987, the U.S. EPA specifically addressed toxics management. In addition to the requirement to eliminate discharge of toxics, there can be a requirement to conduct a toxicity reduction evaluation (TRE). The scope of toxicity reduction varies from the very simple and inexpensive to the highly complex and costly. This book, volume three of the Water Quality Management Library, provides a complete overview of toxicity reduction evaluation. The book presents the testing and removal of toxicants, toxicity testing procedures, sampling techniques, baseline collection data, and source identification. Plus, the book presents toxicity reduction methodologies including unit processes necessary for organic toxicant control using biological and physical chemical methodologies as well as selected unit processes necessary for inorganic toxicant control.

New Trends in Removal of Heavy Metals from Industrial Wastewater covers the applicable technologies relating to the removal of heavy metals from wastewater and new and emerging trends in the field, both at the laboratory and industrial scale. Sections explore new environmentally friendly technologies, the principles of sustainable development, the main factors contributing to heavy metal removal from wastewater, methods and procedures, materials (especially low-cost materials originated from industrial and agricultural waste), management of wastewater containing heavy metals and wastewater valorization, recycling, environmental impact, and wastewater policies for post heavy metal removal. This book is an advanced and updated vision of existing heavy metal removal technologies with their limitations and challenges and their potential application to remove heavy metals/environmental pollutants through advancements in bioremediation. Finally, sections also cover new trends and advances in environmental bioremediation with recent developments in this field by an application of chemical/biochemical and environmental biotechnology. - Outlines the fate and occurrence of heavy metals in Wastewater Treatment Plants (WWTPs) and potential approaches for their removal - Describes the techniques currently available for removing heavy metals from wastewater - Discusses the emerging technologies in heavy metal removal - Covers biological treatments to remove heavy metals - Includes the valorization of heavy metal containing wastewater

Biological Treatment of Industrial Wastewater presents a comprehensive overview of the latest advances and trends in the use of bioreactors for treating industrial wastewater.

The past 30 years have seen the emergence of a growing desire worldwide to take positive actions to restore and protect the environment from the degrading effects of all forms of pollution: air, noise, solid waste, and water. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste exists, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? The principal intention of the Handbook of Environmental Engineering series is to help readers formulate answers to the last two questions. The traditional approach of applying tried-and-true solutions to specific pollution pr- lems has been a major contributing factor to the success of environmental engineering, and has accounted in large measure for the establishment of a “methodology of pollution c- trol. ” However, realization of the ever-increasing complexity and interrelated nature of current environmental problems makes it imperative that intelligent planning of pollution abatement systems be undertaken.

With increasing government regulation of pollution, as well as willingness to levy punitive fines for transgressions, treatment of industrial waste is a important subject. This book is a single source of information on treatment procedures using biochemical means for all types of solid, liquid and gaseous contaminants generated by various chemical and allied industries. This book is intended for practicing environmental engineers and technologists from any industry as well as researchers and professors. The topics covered include the treatment of gaseous, liquid and solid waste from a large number of chemical and allied industries that include dye stuff, chemical, alcohol, food processing, pesticide, pharmaceuticals, paint etc. Information on aerobic and anaerobic reactors and modeling and simulation of waste treatment systems are also discussed.* Compares chemical and biochemical means of industrial waste treatment* Provides details of technology (i.e. reactors, operating conditions etc) with regard to the biochemistry aspects.* Can be used as a teaching aid for graduate courses and a reference material by practicing environmental scientists and engineers.* Researchers can extract synergy between treatment procedures and various effluents.

In recent decades, scientific insight into the chemistry of water has increased enormously, leading to the development of advanced wastewater and water purification technologies. However, the quality of freshwater resources has continually deteriorated worldwide, both in industrialized and developing countries. Although traditional wastewater technologies focus on the removal of suspended solids, nutrients and bacteria, hundreds of organic pollutants occur in wastewater and urban surface waters. These new pollutants are synthetic or naturally occurring chemicals that are not often monitored in the environment but have the potential to enter the environment and cause known or suspected adverse ecological and / or human health effects. Collectively referred to as the "emerging contaminants," they are mostly derived from domestic use and occur in trace concentrations ranging from pico to micrograms per liter. Environmental contaminants are resistant to conventional wastewater treatment processes and most of them remain unaffected, leading to the contamination of the receiving water. As such, there is a need for advanced wastewater treatment process that is capable of removing environmental contaminants to ensure safe fresh water supplies. This book explains the biological and chemical wastewater treatment technologies. The biological wastewater treatment processes presented include: (1) bioremediation of wastewater such as aerobic and anaerobic treatment; (2) phytoremediation of wastewater using engineered wetlands, rhizofiltration, rhizodegradation, phytodegradation, phytoaccumulation, phytotransformation and hyperaccumulators; and (3) mycoremediation of wastewater. The chemical wastewater treatment processes discussed include chemical precipitation, ion exchange, neutralization, adsorption and disinfection. In addition, the book describes wastewater treatment plants in terms of plant size, layout and design as well as installation location. Also presenting the latest, innovative effluent water treatment processes, it is a valuable resource for biochemical and wastewater treatment engineers, environmental scientists and environmental microbiologists.

Removal of Toxic Pollutants through Microbiological and Tertiary Treatment: New Perspectives offers a current account of existing advanced oxidation strategies - including their limitations, challenges, and potential applications - in removing environmental pollutants through microbiological and tertiary treatment methods. The book introduces new trends and advances in environmental bioremediation technology, with thorough discussion of recent developments in the field. Updated information as well as future research directions in the field of bioremediation of industrial wastes is included. This book is an indispensable guide to students, researchers, scientists, and professionals working in fields such as microbiology, biotechnology, environmental sciences, eco-toxicology, and environmental remediation. The book also serves as a helpful guide for waste management professionals and those working on the biodegradation and bioremediation of industrial wastes and environmental pollutants for environmental sustainability. - Introduces various treatment schemes, including microbiological and tertiary technologies for bioremediation of environmental pollutants and industrial wastes - Includes pharmaceutical wastewater, oil refinery wastewater, distillery wastewater, tannery wastewater, textile wastewater, mine tailing wastes, plastic wastes, and more - Describes the role of relatively new treatment technologies and their approaches in bioremediation, including molecular and protein engineering technologies, microbial enzymes, bio surfactants, plant-microbe interactions, and genetically engineered organisms - Provides many advanced technologies in the field of bioremediation and phytoremediation, including electro-bioremediation technology, microbial fuel cell technology, nano-bioremediation technology, and phytotechnologies