Presenting recent principles of thin plate and shell theories, this book emphasizes novel analytical and numerical methods for solving linear and nonlinear plate and shell dilemmas, new theories for the design and analysis of thin plate-shell structures, and real-world numerical solutions, mechanics, and plate and shell models for engineering appli

The study ofthree-dimensional continua has been a traditional part of graduate education in solid mechanics for some time. With rational simplifications to the three-dimensional theory of elasticity, the engineering theories of medium-thin plates and of thin shells may be derived and applied to a large class of engi neering structures distinguished by a characteristically small dimension in one direction. Often, these theories are developed somewhat independently due to their distinctive geometrical and load-resistance characteristics. On the other hand, the two systems share a common basis and might be unified under the classification of Surface Structures after the German term Fliichentragwerke. This common basis is fully exploited in this book. A substantial portion of many traditional approaches to this subject has been devoted to constructing classical and approximate solutions to the governing equations of the system in order to proceed with applications. Within the context of analytical, as opposed to numerical, approaches, the limited general ity of many such solutions has been a formidable obstacle to applications involving complex geometry, material properties, and/or loading. It is now relatively routine to obtain computer-based solutions to quite complicated situations. However, the choice of the proper problem to solve through the selection of the mathematical model remains a human rather than a machine task and requires a basis in the theory of the subject.

Plate and shell theories experienced a renaissance in recent years. The potentials of smart materials, the challenges of adaptive structures, the demands of thin-film technologies and more on the one hand and the availability of newly developed mathematical tools, the tremendous increase in computer facilities and the improvement of commercial software packages on the other caused a reanimation of the scientific interest. In the present book the contributions of the participants of the EUROMECH Colloquium 444 "Critical Review of the Theories of Plates and Shells and New Applications" have been collected. The aim was to discuss the common roots of different plate and shell approaches, to review the current state of the art, and to develop future lines of research. Contributions were written by scientists with civil and mechanical engineering as well as mathematical and physical background.

This book is intended primarily as a teaching text, as well as a reference for individual study in the behavior of thin walled structural components. Such structures are widely used in the engineering profession for spacecraft, missiles, aircraft, land-based vehicles, ground structures, ocean craft, underwater vessels and structures, pressure vessels, piping, chemical processing equipment, modern housing, etc. It presupposes that the reader has already completed one basic course in the mechanics or strength of materials. It can be used for both undergraduate and graduate courses. Since beams (columns, rods), plates and shells comprise components of so many of these modern structures, it is necessary for engineers to have a working knowledge of their behavior when these structures are subjected to static, dynamic (vibration and shock) and environmental loads. Since this text is intended for both teaching and self-study, it stresses fundamental behavior and techniques of solution. It is not an encyclopedia of all research or design data, but provides the reader the wherewithal to read and study the voluminous literature. Chapter 1 introduces the three-dimensional equations oflinear elasticity, deriving them to the extent necessary to treat the following material. Chapter 2 presents, in a concise way, the basic assumptions and derives the governing equations for classical Bernoulli-Euler beams and plates in a manner that is clearly understood.

This book is written for teachers, researchers and students who wish to learn about different thin plate models and to master the underlying mathematical approximation problems. It contains mainly new results and original applications for the research of delamination of multilayered structures.

Over the past decade or so much has been written on the various attempts to produce efficient, accurate and reliable Mindlin plate finite elements. In the late sixties, a degenerated, Mindlin-type, curved shell element was developed and subsequently many improvements in such elements have been made. Reliability and efficiency in use has always been a major objective. Degenerated shell elements have enjoyed widespread popularity despite certain potential defects, including shear and membrane lock ing behaviour and spurious mechanisms. After introducing the basic foundations of Mindlin-type elements, this book describes these defects and also gives the reasons for their occurrence. Furthermore, the author proposes an approach to overcome these defects. A series of linear benchmark tests are proposed to illustrate the performance of the assumed strain element formulations. The formula tions and applications for material non-linearity are also presented. Both isotropic and anisotropic material models are included together with the results for both static and transient dynamic analyses. Two associated programs are fully documented and provided on floppy discs with test examples. Source codes for the two associated programs are provided: one is for static analysis and the other for dynamic analysis, and the programs can be compiled and run on either a mini or mainframe coniputer via a terminal. The author hopes that this book may provide further impetus in the important research area of plate and shell element technology.

Vibrations drive many engineering designs in today's engineering environment. There has been an enormous amount of research into this area of research over the last decade. This book documents some of the latest research in the field of vibration of composite shells and plates filling a much-needed gap in the market. Laminated composite shells have many engineering applications including aerospace, mechanical, marine and automotive engineering. This book makes an ideal reference for researchers and practicing engineers alike. - The first book of its kind - Documents 10 years of research in the field of composite shells - Many Engineering applications

This book is written primarily for professional engineers interested in designing plate and shell structures. It covers basic aspects of theories and gives examples for the design of components due to internal and external loads as well as other loads, such as wind and dead loads. Various derivations are kept relatively simple and the resultant equations are simplified to a level where the engineer can apply them directly to design problems. More elaborate derivations and more general equations can be found in the literature for those interested in a more in-depth knowledge of the theories of plates and shells. The examples given throughout this book are intended to show the engineer the level of analysis needed to achieve a safe design based on a given required degree of accuracy. This book is also appropriate for advanced engineering courses.

This applications-oriented introduction fills an important gap in the field of solid mechanics. Offering a thorough grounding in the tensor-based theory of elasticity for courses in mechanical, civil, materials or aeronautical engineering, it allows students to apply the basic notions of mechanics to such important topics as stress analysis. Further, they will also acquire the necessary background for more advanced work in elasticity, plasticity, shell theory, composite materials and finite element mechanics. This second edition features new chapters on the bending of thin plates, time-dependent effects, and strength and failure criteria.

This book guides the reader into the modelling of shell structures in applications where advanced composite materials or complex biological materials must be described with great accuracy. A valuable resource for researchers, professionals and graduate students, it presents a variety of practical concepts, diagrams and numerical results.