This book discusses the thermodynamic mechanism of MQL grinding with nano-biological lubricant from the force, heat, surface integrity, and micro-morphology. It makes up the fatal defect of the lack of heat transfer capability of traditional MQL grinding. The machining accuracy, surface quality, especially surface integrity of the workpiece, are significantly improved; at the same time, the service life of the grinding wheel is increased and the working environment is improved. The general scope of the book’s content is the effects of MQL grinding with nano-bio-lubricant on grinding force, thermal mechanism, and surface. It provides a new method of sustainable green grinding for environment-friendly, resource-saving, and energy-efficient utilization and solves the technical bottleneck of the insufficient capacity in MQL heat transfer.

The achievement of high-efficiency and precise grinding of difficult-to-cut metals—like titanium alloys—is essential in the aerospace industry. However, the process often results in thermal damage to the workpiece surface, posing a significant technical challenge. While minimum quantity lubrication (MQL) has been used to aid titanium alloy grinding, its effectiveness is limited by insufficient heat dissipation and lubrication. As an alternative to normal temperature air for carrying micro-lubricants, Cryogenic air has shown promise in improving oil film heat transfer and lubrication performance in the grinding zone, thus reducing workpiece surface thermal damage. The experimental state of the technology demands more comprehensive studies on its effectiveness and on the underlying mechanisms. Thermodynamic Mechanism of Cryogenic Air Minimum Quantity Lubrication Grinding addresses these challenges by providing a theoretical framework for understanding and optimizing cryogenic air minimum quantity lubrication in grinding processes, particularly for titanium alloys. It explores the physical characteristics of lubricants under cryogenic conditions, the influence of low temperatures on atomization effects, droplet formation dynamics, and heat transfer mechanisms within the grinding zone. By establishing quantitative relationships between cryogenic air parameters and lubricant properties, the book lays a foundation for enhancing the cooling lubrication mechanism of cryogenic air MQL in grinding processes. Researchers, scholars, and graduate students in universities and research institutes focusing on machining will find this book invaluable, as it goes beyond the theoretical insights into practical solutions to enhance grinding efficiency and reduce thermal damage.

In the present book, various applications of microfluidics and nanofluidics are introduced. Microfluidics and nanofluidics span a broad array of disciplines including mechanical, materials, and electrical engineering, surface science, chemistry, physics and biology. Also, this book deals with transport and interactions of colloidal particles and biomolecules in microchannels, which have great importance to many microfluidic applications, such as drug delivery in life science, microchannel heat exchangers in electronic cooling, and food processing industry. Furthermore, this book focuses on a detailed description of the thermal transport behavior, challenges and implications that involve the development and use of HTFs under the influence of atomistic-scale structures and industrial applications.

The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.

The second volume of the Wiley series, Environmentally Conscious Manufacturing focuses on environmentally preferable approaches to manufacturing. Contributors present and discuss the technologies engineers need to specify and employ to make manufacturing operations environmentally friendly and conform to environmental regulations. Chapters cover Hazardous Waste Minimization and Management; Cost-Effective Manufacturing; Real-time Process Monitoring and Control; Ethics in ECM; Governmental Regulations and Policies, and Total Quality Management. In each chapter case studies are provided to guide readers in areas outside their expertise.

Hybrid Nanofluids: Preparation, Characterization and Applications presents the history of hybrid nanofluids, preparation techniques, thermoelectrical properties, rheological behaviors, optical properties, theoretical modeling and correlations, and the effect of all these factors on potential applications, such as solar energy, electronics cooling, heat exchangers, machining, and refrigeration. Future challenges and future work scope have also been included. The information from this book enables readers to discover novel techniques, resolve existing research limitations, and create novel hybrid nanofluids which can be implemented for heat transfer applications. Describes the characterization, thermophysical and electrical properties of nanofluids Assesses parameter selection and property measurement techniques for the calibration of thermal performance Provides information on theoretical models and correlations for predicting hybrid nanofluids properties from experimental properties

Microfluidics have aroused a new surge of interest in recent years in environmental and energy areas, and inspired novel applications to tackle the worldwide challenges for sustainable development. This book aims to present readers with a valuable compendium of significant advances in applying the multidisciplinary microfluidic technologies to address energy and environmental problems in a plethora of areas such as environmental monitoring and detection, new nanofluid application in traditional mechanical manufacturing processes, development of novel biosensors, and thermal management. This book will provide a new perspective to the understanding of the ever-growing importance of microfluidics.

This book provides readers with the fundamental, analytical, and quantitative knowledge of machining process planning and optimization based on advanced and practical understanding of machinery, mechanics, accuracy, dynamics, monitoring techniques, and control strategies that they need to understanding machining and machine tools. It is written for first-year graduate students in mechanical engineering, and is also appropriate for use as a reference book by practicing engineers. It covers topics such as single and multiple point cutting processes; grinding processes; machine tool components, accuracy, and metrology; shear stress in cutting, cutting temperature and thermal analysis, and machine tool chatter. The second section of the book is devoted to “Non-Traditional Machining,” where readers can find chapters on electrical discharge machining, electrochemical machining, laser and electron beam machining, and biomedical machining. Examples of realistic problems that engineers are likely to face in the field are included, along with solutions and explanations that foster a didactic learning experience.

Nanobiosensors: Nanotechnology in the Agri-Food Industry, Volume 8, provides the latest information on the increasing demand for robust, rapid, inexpensive, and safe alternative technologies that monitor, test, and detect harmful or potentially dangerous foods. Due to their high sensitivity and selectivity, nanobiosensors have attracted attention for their use in monitoring not only biological contaminants in food, but also potential chemical and physical hazards. This book offers a broad overview regarding the current progress made in the field of nanosensors, including cutting-edge technological progress and the impact of these devices on the food industry. Special attention is given to the detection of microbial contaminants and harmful metabolotes, such as toxins and hormones, which have a great impact on both humans and animal health and feed. - Includes the most up-to-date information on nanoparticles based biosensors and quantum dots for biological detection - Provides application methods and techniques for research analysis for bacteriological detection and food testing - Presents studies using analytical tools to improve food safety and quality analysis

This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.