Microelectronics packaging and interconnection have experienced exciting growth stimulated by the recognition that systems, not just silicon, provide the solution to evolving applications. In order to have a high density/ performance/yield/quality/reliability, low cost, and light weight system, a more precise understanding of the system behavior is required. Mechanical and thermal phenomena are among the least understood and most complex of the many phenomena encountered in microelectronics packaging systems and are found on the critical path of neatly every design and process in the electronics industry. The last decade has witnessed an explosive growth in the research and development efforts devoted to determining the mechanical and thermal behaviors of microelectronics packaging. With the advance of very large scale integration technologies, thousands to tens of thousands of devices can be fabricated on a silicon chip. At the same time, demands to further reduce packaging signal delay and increase packaging density between communicat ing circuits have led to the use of very high power dissipation single-chip modules and multi-chip modules. The result of these developments has been a rapid growth in module level heat flux within the personal, workstation, midrange, mainframe, and super computers. Thus, thermal (temperature, stress, and strain) management is vital for microelectronics packaging designs and analyses. How to determine the temperature distribution in the elec tronics components and systems is outside the scope of this book, which focuses on the determination of stress and strain distributions in the electronics packaging.

Microelectronics packaging and interconnection have experienced exciting growth stimulated by the recognition that systems, not just silicon, provide the solution to evolving applications. In order to have a high density/ performance/yield/quality/reliability, low cost, and light weight system, a more precise understanding of the system behavior is required. Mechanical and thermal phenomena are among the least understood and most complex of the many phenomena encountered in microelectronics packaging systems and are found on the critical path of neatly every design and process in the electronics industry. The last decade has witnessed an explosive growth in the research and development efforts devoted to determining the mechanical and thermal behaviors of microelectronics packaging. With the advance of very large scale integration technologies, thousands to tens of thousands of devices can be fabricated on a silicon chip. At the same time, demands to further reduce packaging signal delay and increase packaging density between communicat ing circuits have led to the use of very high power dissipation single-chip modules and multi-chip modules. The result of these developments has been a rapid growth in module level heat flux within the personal, workstation, midrange, mainframe, and super computers. Thus, thermal (temperature, stress, and strain) management is vital for microelectronics packaging designs and analyses. How to determine the temperature distribution in the elec tronics components and systems is outside the scope of this book, which focuses on the determination of stress and strain distributions in the electronics packaging.

This handbook provides the most comprehensive, up-to-date and easy-to-apply information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials. It details their assemblies, structures and systems, and each chapter contains a summary of the state-of-the-art in a particular field. The book provides practical recommendations on how to apply current knowledge and technology to design and manufacture. It further describes how to operate a viable, reliable and cost-effective electronic component or photonic device, and how to make such a device into a successful commercial product.

This book is a one-stop guide to the state of the art of COB technology. For professionals active in COB and MCM research and development, those who wish to master COB and MCM problem-solving methods, and those who must choose a cost-effective design and high-yield manufacturing process for their interconnect systems, here is a timely summary of progress in al aspects of this fascinating field. It meets the reference needs of design, material, process, equipment, manufacturing, quality, reliability, packaging, and system engineers, and technical managers working in electronic packaging and interconnection.

Electronics has become the largest industry, surpassing agriCUlture, auto. and heavy metal industries. It has become the industry of choice for a country to prosper, already having given rise to the phenomenal prosperity of Japan. Korea. Singapore. Hong Kong. and Ireland among others. At the current growth rate, total worldwide semiconductor sales will reach $300B by the year 2000. The key electronic technologies responsible for the growth of the industry include semiconductors. the packaging of semiconductors for systems use in auto, telecom, computer, consumer, aerospace, and medical industries. displays. magnetic, and optical storage as well as software and system technologies. There has been a paradigm shift, however, in these technologies. from mainframe and supercomputer applications at any cost. to consumer applications at approximately one-tenth the cost and size. Personal computers are a good example. going from $500IMIP when products were first introduced in 1981, to a projected $lIMIP within 10 years. Thin. light portable. user friendly and very low-cost are. therefore. the attributes of tomorrow's computing and communications systems. Electronic packaging is defined as interconnection. powering, cool ing, and protecting semiconductor chips for reliable systems. It is a key enabling technology achieving the requirements for reducing the size and cost at the system and product level.

Whether you are designing a new system or troubleshooting a current one, this ingenious text offers a wealth of valuable information. The author focuses on reliability problems and the design of systems with incomplete criteria and components and provides a simple approach for estimating thermal and mechanical characteristics of electronic systems. Practical Guide to the Packaging of Electronics discusses Packaging/enclosure design and reliability Thermal, junction-to-case, and contact interface resistance Direct and indirect flow system design Fin design and fan selection Vital elements of shock and vibration Thermal stresses and strains in the design and analysis of mechanically reliable systems Reliability models and system failure The selection of engineering software to facilitate system analysis Design parameters in an avionics electronics package Practical Guide to the Packaging of Electronics is an excellent refresher for mechanical, biomedical, electrical and electronics, manufacturing, materials, and quality and reliability engineers, and will be an invaluable text for upper-level undergraduate and graduate students in these disciplines.

One of the greatest challenges facing package manufacturers is to develop reliable fine pitch thin packages with high leadcounts, capable of dissipating heat, and deliver them in volume to the market in a very short space of time. How can this be done? Firstly, package structures, materials, and manufacturing processes must be optimised. Secondly, it is necessary to predict the likely failures and behaviour of parts before manufacture, whilst minimising the amount of time and money invested in undertaking costly experimental trials. In a high volume production environment, any design improvement that increases yield and reliability can be of immense benefit to the manufacturer. Components and systems need to be packaged to protect the IC from its environment. Encapsulating devices in plastic is very cheap and has the advantage of allowing them to be produced in high volume on an assembly line. Currently 95% of all ICs are encapsulated in plastic. Plastic packages are robust, light weight, and suitable for automated assembly onto printed circuit boards. They have developed from low pincount (14-28 pins) dual-in-line (DIP) packages in the 1970s, to fine pitch PQFPs (plastic quad flat pack) and TQFPs (thin quad flat pack) in the 1980s-1990s, with leadcounts as high as 256. The demand for PQFPs in 1997 was estimated to be 15 billion and this figure is expected to grow to 20 billion by the year 2000.

As the demand for packaging more electronic capabilities into smaller packages rises, product developers must be more cognizant of how the system configuration will impact its performance. Practical Guide to the Packaging of Electronics: Second Edition, Thermal and Mechanical Design and Analysis provides a basic understanding of the issues that concern the field of electronics packaging. First published in 2003, this book has been extensively updated, includes more detail where needed, and provides additional segments for clarification. This volume supplies a solid foundation for heat transfer, vibration, and life expectancy calculations. Topics discussed include various modes of heat removal, such as conduction, radiation, and convection; the impact of thermal stresses; vibration and the resultant stresses; shock management; mechanical, electrical, and chemically induced reliability; and more. Unlike many other available works, it neither assumes the reader’s familiarity with the subject nor is it so basic that the reader may lose interest. Dr. Ali Jamnia has published a large number of engineering papers and presentations and is the holder of a number of patents and patent applications. He has been involved in the issues of electronics packaging since the early ‘90s and since 1995 has worked toward the development of innovative electronics systems to aid individuals with physical or cognitive disabilities. By consulting this manual, engineers, program managers, and quality assurance managers involved in electronic systems gain a fundamental grasp of the issues involved in electronics packaging, learn how to define guidelines for a system’s design, develop the ability to identify reliability issues and concerns, and are able to conduct more complete analyses for the final design.

The book focuses on the design, materials, process, fabrication, and reliability of chiplet design and heterogeneous integraton packaging. Both principles and engineering practice have been addressed, with more weight placed on engineering practice. This is achieved by providing in-depth study on a number of major topics such as chip partitioning, chip splitting, multiple system and heterogeneous integration with TSV-interposers, multiple system and heterogeneous integration with TSV-less interposers, chiplets lateral communication, system-in-package, fan-out wafer/panel-level packaging, and various Cu-Cu hybrid bonding. The book can benefit researchers, engineers, and graduate students in fields of electrical engineering, mechanical engineering, materials sciences, and industry engineering, etc.