The design and construction of the appropriate building envelope is one of the most effective ways for improving a building's thermal performance. Thermal Inertia in Energy Efficient Building Envelopes provides the optimal solutions, tools and methods for designing the energy efficient envelopes that will reduce energy consumption and achieve thermal comfort and low environmental impact. Thermal Inertia in Energy Efficient Building Envelopes provides experimental data, technical solutions and methods for quantifying energy consumption and comfort levels, also considering dynamic strategies such as thermal inertia and natural ventilation. Several type of envelopes and their optimal solutions are covered, including retrofit of existing envelopes, new solutions, passive systems such as ventilated facades and solar walls. The discussion also considers various climates (mild or extreme) and seasons, building typology, mode of use of the internal environment, heating profiles and cross-ventilation - Experimental investigations on real case studies, to explore in detail the behaviour of different envelopes - Laboratory tests on existing insulation to quantify the actual performances - Analytical simulations in dynamic conditions to extend the boundary conditions to other climates and usage profiles and to consider alternative insulation strategies - Evaluation of solutions sustainability through the quantification of environmental and economic impacts with LCA analysis; including global cost comparison between the different scenarios - Integrated evaluations between various aspects such as comfort, energy saving, and sustainability

This Special Issue includes 20 contributions from across the world with very interesting and current research topics, such as insulation solutions and CO2 emissions; thermal transmittance of LSF walls; statistics for China's building energy consumption; natural ventilation; thermal behavior of an earthbag building; thermal performance and comfort in a vernacular building; overheating risk under future extreme weather conditions; analytical methods to estimate the thermal transmittance of LSF walls; model simplification on energy and comfort simulation analysis; Trombe wall thermal behavior and energy efficiency of an LSF compartment; new metering hot box for in situ hygrothermal measurement; mechanical and thermal performance of compressed earth blocks; life-cycle assessment of a new house; energy analyses of Serbian buildings with horizontal overhangs; thermal properties of mortar blocks by using recycled glass; prediction of cooling energy consumption building using machine learning techniques; occupants' behavior, climate change, heating, and cooling energy needs of buildings; a new method for establishing a hygrothermally controlled test room; nonintrusive measurements to incorporate the air renovations in dynamic models; and retrofit of existing buildings with aerogel panels.

Presenting an overview of the use of Phase Change Materials (PCMs) within buildings, this book discusses the performance of PCM-enhanced building envelopes. It reviews the most common PCMs suitable for building applications, and discusses PCM encapsulation and packaging methods. In addition to this, it examines a range of PCM-enhanced building products in the process of development as well as examples of whole-building-scale field demonstrations. Further chapters discuss experimental and theoretical analyses (including available software) to determine dynamic thermal and energy performance characteristics of building enclosure components containing PCMs, and present different laboratory and field testing methods. Finally, a wide range of PCM building products are presented which are commercially available worldwide. This book is intended for students and researchers of mechanical, architectural and civil engineering and postgraduate students of energy analysis, dynamic design of building structures, and dynamic testing procedures. It also provides a useful resource for professionals involved in architectural and mechanical-civil engineering design, thermal testing and PCM manufacturing.

Thermofluid Modeling for Sustainable Energy Applications provides a collection of the most recent, cutting-edge developments in the application of fluid mechanics modeling to energy systems and energy efficient technology. Each chapter introduces relevant theories alongside detailed, real-life case studies that demonstrate the value of thermofluid modeling and simulation as an integral part of the engineering process. Research problems and modeling solutions across a range of energy efficiency scenarios are presented by experts, helping users build a sustainable engineering knowledge base. The text offers novel examples of the use of computation fluid dynamics in relation to hot topics, including passive air cooling and thermal storage. It is a valuable resource for academics, engineers, and students undertaking research in thermal engineering. - Includes contributions from experts in energy efficiency modeling across a range of engineering fields - Places thermofluid modeling and simulation at the center of engineering design and development, with theory supported by detailed, real-life case studies - Features hot topics in energy and sustainability engineering, including thermal storage and passive air cooling - Provides a valuable resource for academics, engineers, and students undertaking research in thermal engineering

Advanced Building Envelope Components: Comparative Experiments focuses on the latest research in innovative materials, systems and components, also providing a detailed technical explanation on what this breakthrough means for building exteriors and sustainability. Topics include a discussion of transparent envelope components, including intelligent kinetic skins, such as low-e coatings, high vs. low silver content in glass, solar control coatings, such as silver vs. niobium vs. tin, and more. In addition, opaque envelope components are also presented, including opaque dynamic facades, clay lining vs. plasterboard and nano clayed foams. - Includes real case studies that explore, in detail, the behavior of different envelopes - Presents laboratory tests on existing insulation (if any, through samples extracted on-site) to quantify actual performances - Provides the tools and methods for comparing, selecting and testing materials and components for designing effective building envelopes - Covers both transparent and opaque envelope components, as well as opaque dynamic facades

Climate change mitigation and sustainable practices are now at the top of political and technical agendas. Environmental system modelling provides a way of appraising options and this book will make a significant contribution to the uptake of such systems. It provides knowledge of the principles involved in modelling systems, builds confidence amongst designers and offers a broad perspective of the potential of these new technologies. The aim of the book is to provide an understanding of the concepts and principles behind predictive modelling methods; review progress in the development of the modelling software available; and explore modelling in building design through international case studies based on real design problems.

This book focuses on the impacts of the built environment, and how to predict and measure the benefits and consequences of changes taking place to address sustainability in the development and building industries. It draws together the best treatments of these subjects from the Leeds Sustainability Institute’s inaugural International Conference on Sustainability, Ecology, Engineering, Design for Society (SEEDS). The focus of discussion is on understanding how buildings and spaces are designed and nurtured to obtain optimal outcomes in energy efficiency and environmental impacts. In addition to examining technical issues such as modeling energy performance, emphasis is placed on the health and well-being of occupants. This holistic approach addresses the interdependence of people with the built and natural environments. The book’s contents reflect the interdisciplinary and international collaboration critical to assembly of the knowledge required for positive change.

This book focuses on latent heat storage, which is one of the most efficient ways of storing thermal energy. Unlike the sensible heat storage method, the latent heat storage method provides much higher storage density with a smaller difference between storing and releasing temperatures. Thermal Energy Storage with Phase Change Materials is structured into four chapters that cover many aspects of thermal energy storage and their practical applications. Chapter 1 reviews selection, performance, and applications of phase change materials. Chapter 2 investigates mathematical analyses of phase change processes. Chapters 3 and 4 present passive and active applications for energy saving, peak load shifting, and price-based control heating using phase change materials. These chapters explore the hot topic of energy saving in an overarching way, and so they are relevant to all courses. This book is an ideal research reference for students at the postgraduate level. It also serves as a useful reference for electrical, mechanical, and chemical engineers and students throughout their work. FEATURES Explains the technical principles of thermal energy storage, including materials and applications in different classifications Provides fundamental calculations of heat transfer with phase change Discusses the benefits and limitations of different types of phase change materials (PCM) in both micro- and macroencapsulations Reviews the mechanisms and applications of available thermal energy storage systems Introduces innovative solutions in hot and cold storage applications

The principle of sustainability should be strictly connected with safety, since both aim to conserve resources: in the case of sustainability, the resources are typically thought of as environmental, while in the case of safety, the resources are basically human. In spite of this common ground, discussions on sustainability usually give insufficient attention to safety. In the last years the EU has made large investments to increase the energy efficiency of the existing building stock, paving the way for a low-carbon future; however, less effort has been made to enhance its seismic resilience. Therefore, the safety and, consequently, the sustainability of towns situated in earthquake-prone countries remain inadequate. In such countries, energy renovation actions should be combined with seismic retrofitting. However, a number of barriers considerably limit the real possibility of extensively undertaking combined retrofit actions, especially for multi-owner housing and high-rise buildings. These barriers are of different kinds: technical (e.g., unfeasibility and/or ineffectiveness of conventional retrofit solutions), financial (e.g., high renovation costs, insufficient incentives/subsidies), organizational (e.g., occupants’ disruption and relocation, renovation consensus by condominium ownerships), and cultural/social (insufficient information and skills, lack of adequate policy measures for promoting renovation actions). This book aims to overcome these barriers and to bridge the gap between sustainability and safety, so to conserve both human and environmental resources.

The book covers chapters ranging from introduction to recent technological challenges, case studies of energy-efficient buildings with policy and awareness issues, fundamentals and present status along with research updates and future aspects on topics focusing on energy-efficient construction, materials Provides comprehensive information on energy efficient buildings including policy and energy audit aspects with case studies Examines application of PCMs in passive heating and cooling in buildings; role of active TES and energy saving potential