“Telescopes and Techniques” has proved itself in its first edition, having become probably one of the most widely used astronomy texts, both for numerate amateur astronomers and for astronomy and astrophysics undergraduates. The first and second editions of the book were widely used as set texts for introductory practical astronomy courses in many universities. This book guides the reader through the mathematics, physics and practical techniques needed to use telescopes (from small amateur models to the larger instruments installed in many colleges) and to observe objects in the sky. Mathematics to around Advanced Placement standard (US) or A level (UK) is assumed, although High School Diploma (US) or GCSE-level (UK) mathematics plus some basic trigonometry will suffice most of the time. Most of the physics and engineering involved is described fully and requires no prior knowledge or experience. This is a ‘how to’ book that provides the knowledge and background required to understand how and why telescopes work. Equipped with the techniques discussed in this book, the observer will be able to operate with confidence his or her telescope and to optimize its performance for a particular purpose. In principle the observer could calculate his or her own predictions of planetary positions (ephemerides), but more realistically the observer will be able to understand the published data lists properly instead of just treating them as ‘recipes.’ When the observer has obtained measurements, he/she will be able to analyze them in a scientific manner and to understand the significance and meaning of the results. “Telescopes and Techniques, 3rd Edition” fills a niche at the start of an undergraduate astronomer’s university studies, as shown by it having been widely adopted as a set textbook. This third edition is now needed to update its material with the many new observing developments and study areas that have come into prominence since it was published. The book concentrates on the knowledge needed to understand how small(ish) optical telescopes function, their main designs and how to set them up, plus introducing the reader to the many ways in which objects in the sky change their positions and how they may be observed. Both visual and electronic imaging techniques are covered, together with an introduction to how data (measurements) should be processed and analyzed. A simple introduction to radio telescopes is also included. Brief coverage of the most advanced topics of photometry and spectroscopy are included, but mainly to enable the reader to see some of the developments possible from the basic observing techniques covered in the main parts of the book.

Ground- or space-based telescopes are becoming increasingly more complex and construction budgets are typically in the billion dollar range. Facing costs of this magnitude, availability of engineering tools for prediction of performance and design optimization is imperative. Establishment of simulation models combining different technical disciplines such as Structural Dynamics, Control Engineering, Optics and Thermal Engineering is indispensable. Such models are normally called Integrated Models because they involve many different disciplines. The models will play an increasingly larger role for design of future interdisciplinary optical systems in space or on ground. The book concentrates on integrated modeling of optical and radio telescopes but the techniques presented will be applicable to a large variety of systems. Hence, the book will be of interest to optical and radio telescope designers, designers of spacecrafts that include optical systems, and to designers of various complex defense systems. The book may also find use as a textbook for undergraduate and graduate courses within the field. "Adaptive Optics" is an exciting and relatively new field, originally dedicated to correction for blurring when imaging through the atmosphere. Although this objective is still of high importance, the concept of Adaptive Optics has recently evolved further. Today, the objective is not only to correct for atmospheric turbulence effects but also for a range of static and dynamical telescope aberrations. The notion of adaptive optics has expanded to the field of "Wavefront Control", correcting for a variety of system aberrations. Wavefront control systems maintain form and position of optical elements with high precision under static and dynamical load. In many ways, such systems replace the steel structures of traditional optical systems, thereby providing much lighter systems with a performance not possible before. Integrated Modeling is the foremost tool for studies of Wavefront Control for telescopes and complex optics and is therefore now of high importance. Springer has recently published two books on telescopes, "Reflecting Telescope Optics" by R. Wilson, and "The Design and Construction of Large Optical Telescopes" by P. Bely. Noting that a new (and expensive) generation of Extremely Large Telescopes with apertures in the 30-100 m range is on the way, the present book on integrated modeling is a good match to the existing books and an appropriate specialization and continuation of some subjects dealt with in those books.

Concise, highly readable book discusses the selection, set-up, and maintenance of a telescope; amateur studies of the sun; lunar topography and occultations; and more. 124 figures. 26 halftones. 37 tables.

The modern aspiring astronomer is faced with a bewil dering choice of commercially produced telescopes, including all the designs considered in the preceding chapter. Yet only four decades ago the choice for a small telescope would have been between just a refrac tor and a Newtonian reflector. That change has come about because of the enormous interest that has grown in astronomy since the start of the space age and with the mind-boggling discoveries of the past 30 or 40 years. Except for some of the very small instruments which are unfortunately often heavily promoted in general mail order catalogues, camera shops and the like, the optical quality of these commercially pro duced telescopes is almost uniformly excellent. Although one product may be slightly better for some types of observation, or more suited to the personal cir cumstances of the observer, than another, most of them will provide excellent observing opportunities. The same general praise cannot be applied, however, to the mountings with which many of these telescopes are provided, and those problems are covered in Chapter 6.

Amateur astronomers of all skill levels are always contemplating their next telescope, and this book points the way to the most suitable instruments. Similarly, those who are buying their first telescopes – and these days not necessarily a low-cost one – will be able to compare and contrast different types and manufacturers. This exciting and revised new guide provides an extensive overview of binoculars and telescopes. It includes detailed up-to-date information on sources, selection and use of virtually every major type, brand, and model on today’s market, a truly invaluable treasure-trove of information and helpful advice for all amateur astronomers. Originally written in 2006, much of the first edition is inevitably now out of date, as equipment advances and manufacturers come and go. This second edition not only updates all the existing sections of “A Buyer’s and User’s Guide to Astronomical Telescopes and Binoculars” but adds two new ones: Astro-imaging and Professional-Amateur collaboration. Thanks to the rapid and amazing developments that have been made in digital cameras – not those specialist cool-chip astronomical cameras, not even DSLRs, but regular general-purpose vacation cameras – it is easily possible to image all sorts of astronomical objects and fields. Technical developments, including the Internet, have also made it possible for amateur astronomers to make a real contribution to science by working with professionals. Selecting the right device for a variety of purposes can be an overwhelming task in a market crowded with observing options, but this comprehensive guide clarifies the process. Anyone planning to purchase binoculars or telescopes for astronomy – whether as a first instrument or as an upgrade to the next level – will find this book a treasure-trove of information and advice. It also supplies the reader with many useful hints and tips on using astronomical telescopes or binoculars to get the best possible results from your purchase.

“Telescopes and Techniques” has proved itself in its first edition, having become probably one of the most widely used astronomy texts, both for numerate amateur astronomers and for astronomy and astrophysics undergraduates. The first and second editions of the book were widely used as set texts for introductory practical astronomy courses in many universities. This book guides the reader through the mathematics, physics and practical techniques needed to use telescopes (from small amateur models to the larger instruments installed in many colleges) and to observe objects in the sky. Mathematics to around Advanced Placement standard (US) or A level (UK) is assumed, although High School Diploma (US) or GCSE-level (UK) mathematics plus some basic trigonometry will suffice most of the time. Most of the physics and engineering involved is described fully and requires no prior knowledge or experience. This is a ‘how to’ book that provides the knowledge and background required to understand how and why telescopes work. Equipped with the techniques discussed in this book, the observer will be able to operate with confidence his or her telescope and to optimize its performance for a particular purpose. In principle the observer could calculate his or her own predictions of planetary positions (ephemerides), but more realistically the observer will be able to understand the published data lists properly instead of just treating them as ‘recipes.’ When the observer has obtained measurements, he/she will be able to analyze them in a scientific manner and to understand the significance and meaning of the results. “Telescopes and Techniques, 3rd Edition” fills a niche at the start of an undergraduate astronomer’s university studies, as shown by it having been widely adopted as a set textbook. This third edition is now needed to update its material with the many new observing developments and study areas that have come into prominence since it was published. The book concentrates on the knowledge needed to understand how small(ish) optical telescopes function, their main designs and how to set them up, plus introducing the reader to the many ways in which objects in the sky change their positions and how they may be observed. Both visual and electronic imaging techniques are covered, together with an introduction to how data (measurements) should be processed and analyzed. A simple introduction to radio telescopes is also included. Brief coverage of the most advanced topics of photometry and spectroscopy are included, but mainly to enable the reader to see some of the developments possible from the basic observing techniques covered in the main parts of the book.

Chris Kitchin has written an easy-to-read book explaining how to use a small telescope and how to find your way around the sky. Covering all the basic topics--telescopes, optics, positions and motion, observing, and instruments--Telescopes and Techniques has been designed as an introduction for anyone wanting a firm grounding in the essentials of astronomy. Whether you are an amateur astronomer, an undergraduate student, or just someone who wants to learn more about this fascinating subject, Telescopes and Techniques is an ideal place to start. This new edition of Telescopes and Techniques is updated for technical changes in astronomical instrumentation.

This book, written by the designer of the worlds largest telescope, the VLT in Chile, covers the essential modern developments in telescope optics. In the last twenty years, modern technology has revolutionized not only manufacturing and test procedures but also the entire area of quality specification. In addition to these topics, the book also covers the alignment of telescope optics, atmospheric optics, adaptive optics, reflective coatings, and ancillary equipment. Richly illustrated, this work covers important modern techniques, which makes it one of the most complete references on telescope optics.

Astronomy Hacks begins the space exploration by getting you set up with the right equipment for observing and admiring the stars in an urban setting. Along for the trip are first rate tips for making most of observations. The hacks show you how to: Dark-Adapt Your Notebook Computer. Choose the Best Binocular. Clean Your Eyepieces and Lenses Safely. Upgrade Your Optical Finder. Photograph the Stars with Basic Equipment.