The challenges facing humanity in the 21st century include climate change, population growth, overconsumption of resources, overproduction of waste and increasing energy demands. For construction practitioners, responding to these challenges means creating a built environment that provides accommodation and infrastructure with better whole-life performance using lower volumes of primary materials, less non-renewable energy, wasting less and causing fewer disturbances to the natural environment. Concrete is ubiquitous in the built environment. It is therefore essential that it is used in the most sustainable way so practitioners must become aware of the range of sustainable concrete solutions available for construction. While sustainable development has been embedded into engineering curricula, it can be difficult for students and academics to be fully aware of the innovations in sustainable construction that are developed by the industry. Sustainable Concrete Solutions serves as an introduction to and an overview of the latest developments in sustainable concrete construction. It provides useful guidance, with further references, to students, researchers, academics and practitioners of all construction disciplines who are faced with the challenge of designing, specifying and constructing with concrete.

Concrete is by far the most common building material- accounting for twice the volume of all other such materials combined. With such a huge global economic impact, the industry has a correspondingly considerable responsibility to use it sustainably. Written by experts who pioneered research into environmental issues and concrete, Concrete and Sust

The book presents new technologies for easy and economical construction of light concrete structures saving materials and CO2. The new super-light technology allows a designer to place forces, where it is optimal, and save material everywhere else. The book also supports this “Direct Engineering” principle with a number of new details and structural principles. The new pearl-chain technology makes it possible to design optimal shapes such as arches, vaults, cupolas, floating tunnels, and shells etc. from inexpensive, and mass-produced components. The new super-light deck-elements presented in the book are now produced in six factories in Denmark, Finland, and USA, and the number is increasing. The book will be of interest for all structural engineers, who would like to save materials, CO2 and optimize their structures, for students learning about the new technologies, and for contractors and architects, who want to investigate new building technologies.

Sustainable Concrete Made with Ashes and Dust from Different Sources: Materials, Properties and Applications focuses on individual materials, addressing material characterization, their role in the strength and durability of construction materials, and structural applications. Each chapter reflects the current state-of-the-art in terms of the effective and efficient use of the material. Types of ashes covered are Coal Fly Ash, Coal Bottom Ash, Bagasse Ash, MSW Ash, Red Mud, Waste Marble Dust, Sewage Sludge Ash, and Cement Kiln Dust. This book is useful for civil engineers in the design and development of sustainable concrete by utilizing such types of ashes and researchers involved in the design and formulation of new cementitious materials. - Focuses on different types of ashes derived from various sources for use in the development of sustainable concrete - Discusses the economic and environmental impacts, normative restrictions, and implementation in codes and standards related to the use of these by-products/wastes in concretes - Includes coverage of the impact of dust from construction and demolition wastes

This book is a thorough and comprehensive update of the 2002 edition, that incorporates detailed references to the Canadian, American, and British (European) standards, contextualized by the author based on over 30 years of construction experience. In addition to updates to the core text, many new topics are presented in the second edition, including a chapter discussing the methods for achieving quality control and ensuring quality assurance in concrete construction. The book consists of two parts. The first part provides basic information about normal concrete, its grades used on sites and various kinds of modified concretes such as fiber- reinforced concrete, sulphur concrete, roller compacted concrete, high performance concrete, ultra- high performance concrete, and flowing concrete. . It further addresses physical properties of concrete and various types of Portland cement, blended cements, admixtures, additives including properties of aggregates and their influence. The second part of the book highlights the principal causes of concrete deterioration along with protective measures, resulting from incorrect selection of constituent materials, poor construction methods, external factors, chemical attack, corrosion problems, hot and cold weather effects, and the various errors in designing and detailing. Featuring an extensive bibliography of the highly adopted standards as well as manuals and journals critical to the construction industry at the end of each chapter, the volume offers readers an advanced understanding of the theory and practical application of concrete technology and international standards in North America and Britain. Addresses concrete technology as well as concrete construction practices, meeting national and international standards; Maximizes readers' understanding of the principal causes of concrete deterioration along with protective measures; Facilitates readers' grasp of different nomenclature used for the same materials in different parts of the world; Features suitable tables, charts, and diagrams that illustrate and organize useful information; Explains sustainable concrete doctrine and how to achieve it meeting green concrete / building requirements; Provides a glossary, conversion factors, and examples of concrete mix design. ·

• New York Times bestseller • The 100 most substantive solutions to reverse global warming, based on meticulous research by leading scientists and policymakers around the world “At this point in time, the Drawdown book is exactly what is needed; a credible, conservative solution-by-solution narrative that we can do it. Reading it is an effective inoculation against the widespread perception of doom that humanity cannot and will not solve the climate crisis. Reported by-effects include increased determination and a sense of grounded hope.” —Per Espen Stoknes, Author, What We Think About When We Try Not To Think About Global Warming “There’s been no real way for ordinary people to get an understanding of what they can do and what impact it can have. There remains no single, comprehensive, reliable compendium of carbon-reduction solutions across sectors. At least until now. . . . The public is hungry for this kind of practical wisdom.” —David Roberts, Vox “This is the ideal environmental sciences textbook—only it is too interesting and inspiring to be called a textbook.” —Peter Kareiva, Director of the Institute of the Environment and Sustainability, UCLA In the face of widespread fear and apathy, an international coalition of researchers, professionals, and scientists have come together to offer a set of realistic and bold solutions to climate change. One hundred techniques and practices are described here—some are well known; some you may have never heard of. They range from clean energy to educating girls in lower-income countries to land use practices that pull carbon out of the air. The solutions exist, are economically viable, and communities throughout the world are currently enacting them with skill and determination. If deployed collectively on a global scale over the next thirty years, they represent a credible path forward, not just to slow the earth’s warming but to reach drawdown, that point in time when greenhouse gases in the atmosphere peak and begin to decline. These measures promise cascading benefits to human health, security, prosperity, and well-being—giving us every reason to see this planetary crisis as an opportunity to create a just and livable world.

Concrete repair continues to be a subject of major interest to engineers and technologists worldwide. The concrete repair budget for the UK alone currently runs at some UKP 220 per annum. Some estimates have indicated that, worldwide, in 2010 the expenditure for maintenance and repair work will represent about 85% of the total expenditure in the construction field. It has been forecast that, in the same year in the USA, 50 billion dollars will be spent just for the restoration of deteriorated bridges and viaducts. An understanding of the latest techniques in repair and testing and inspection is thus crucial to the international construction industry. This book, with contributions from 34 countries, brings together the best in research, practical application, strategy and theory relating to concrete repair, testing and inspection, fire damage, composites and electro-chemical repair.

Until recently, much of the development of building materials has predominantly focused on producing cheaper, stronger and more durable construction materials. More recently attention has been given to the environmental issues in manufacturing, using, disposing and recycling of construction materials. Sustainability of construction materials brings together a wealth of recent research on the subject.The first part of the book gives a comprehensive and detailed analysis of the sustainability of the following building materials: aggregates; timber, wood and bamboo; vegetable fibres; masonry; cement, concrete and cement replacement materials; metals and alloys; glass; and engineered wood products. A final group of chapters cover the use of waste tyre rubber in civil engineering works, the durability of sustainable construction materials and nanotechnologies for sustainable construction.With its distinguished editor and international team of contributors, Sustainability of construction materials is a standard reference for anyone involved in the construction and civil engineering industries with an interest in the highly important topic of sustainability. - Provides a comprehensive and detailed analysis of the sustainability of a variety of construction materials ranging from wood and bamboo to cement and concrete - Assesses the durability of sustainable construction materials including the utilisation of waste tyre rubber and vegetable fibres - Collates a wealth of recent research including relevant case studies as well as an investigation into future trends