Selected, peer reviewed papers from the 11th International Conference on Superplasticity in Advanced Materials, July 3-5, 2012, Albi, France

The book presents practical and theoretical works on superplasticity in metals and ceramics, on deformation mechanisms, on processes to obtain large ultrafine-grained structures, on advanced characterization techniques, and on hot deformation of advanced materials. Key papers focus on (1) processing of metallic alloys for achieving exceptional superplastic properties, (2) high-pressure sliding (HPS) processes, (3) in-situ neutron and synchrotron methods, and (4) ultra-severe plastic deformation. Keywords: Superplasticity, Superfunctionality, High-pressure Sliding, High-pressure Torsion, Precise Forming, Numerical Simulation, Aeronautical Parts, Near-unconstrained Superplastic Parts, Low-temperature Superplasticity, Friction Stir Processing, Microstructure Evolution, Corrosion Properties, Duplex Stainless Steel, Grain Boundary Sliding, Laminated Materials, Asymmetric Hot Rolling, Uniaxial Hot Pressing, Diffusion Bonding.

The principal aim of this text is to encourage the development and application of numerical modelling techniques as an aid to achieving greater efficiency and optimization of metal-forming processes. The contents of this book have therefore been carefully planned to provide both an introduction to the fundamental theory of material deformation simulation, and also a comprehensive survey of the "state-of-the-art" of deformation modelling techniques and their application to specific and industrially relevant processes. To this end, leading international figures in the field of material deformation research have been invited to contribute chapters on subjects on which they are acknowledged experts. The information in this book has been arranged in four parts: Part I deals with plasticity theory, Part II with various numerical modelling techniques, Part III with specific process applications and material phenomena and Part IV with integrated computer systems. The objective of Part I is to establish the underlying theory of material deformation on which the following chapters can build. It begins with a chapter which reviews the basic theories of classical plasticity and describes their analytical representations. The second chapter moves on to look at the theory of deforming materials and shows how these expressions may be used in numerical techniques. The last two chapters of Part I provide a review of isotropic plasticity and anisotropic plasticity.

Ultra fine-grained metals can show exceptional ductility, known as superplasticity, during sheet forming. The higher ductility of superplastic metals makes it possible to form large and complex components in a single operation without joints or rivets. The result is less waste, lower weight and manufacturing costs, high precision and lack of residual stress associated with welding which makes components ideal for aerospace, automotive and other applications. Superplastic forming of advanced metallic materials summarises key recent research on this important process.Part one reviews types of superplastic metals, standards for superplastic forming, processes and equipment. Part two discusses ways of modelling superplastic forming processes whilst the final part of the book considers applications, including superplastic forming of titanium, aluminium and magnesium alloys.With its distinguished editor and international team of contributors, Superplastic forming of advanced metallic materials is a valuable reference for metallurgists and engineers in such sectors as aerospace and automotive engineering.Note: The Publishers wish to point out an error in the authorship of Chapter 3 which was originally listed as: G. Bernhart, Clément Ader Institute, France. The correct authorship is: G Bernhart, P. Lours, T. Cutard, V. Velay, Ecole des Mines Albi, France and F. Nazaret, Aurock, France. The Publishers apologise to the authors for this error. - Reviews types of superplastic metals and standards for superplastic forming - Discusses the modelling of superplastic forming, including mathematical and finite element modelling - Examines various applications, including superplastic forming of titanium, aluminiun and magnesium alloys

This book combines the perspectives of materials science of Superplasticity, on the one hand, and those of design and mechanics, on the other, in order to provide a holistic view of materials, design, mechanics and performance which will lead to useful solutions of societal benefits, in addition to providing great intellectual challenges. After considering the experimental evidence for superplasticity in different classes of materials, the book discusses the physics-based models, along with their advantages and limitations. Then, the analyses for superplastic forming available in the framework of continuum mechanics, finite element analysis and numerical simulations are presented. Finally, the authors highlight some successful industrial applications. This book is recommended as a text book for courses on Superplasticity and as supplementary use for courses on Materials Processing, Manufacturing, High Temperature Deformation, Nanotechnology and Mechanical Behavior of Materials. Persons working in Department of Materials Science and Engineering, Physics, Mechanics, Mechanical Engineering, Aerospace Engineering, Metallurgy, Ceramics and Geo-sciences are likely to find the book to be useful. It is also recommended as a reference source for practicing engineers involved in the design, processing and manufacture of industrial components, which exploit the unique properties associated with superplastic materials.

ICSAM-94 International Conference on Superplasticity in Advanced Materials (ICSAM-94), Moscow, Russia, May 1994

Superplasticity is the ability of polycrystalline materials under certain conditions to exhibit extreme tensile elongation in a nearly homogeneous/isotropic manner. Historically, this phenomenon was discovered and systematically studied by metallurgists and physicists. They, along with practising engineers, used materials in the superplastic state for materials forming applications. Metallurgists concluded that they had the necessary information on superplasticity and so theoretical studies focussed mostly on understanding the physical and metallurgi cal properties of superplastic materials. Practical applications, in contrast, were led by empirical approaches, rules of thumb and creative design. It has become clear that mathematical models of superplastic deformation as well as analyses for metal working processes that exploit the superplastic state are not adequate. A systematic approach based on the methods of mechanics of solids is likely to prove useful in improving the situation. The present book aims at the following. 1. Outline briefly the techniques of mechanics of solids, particularly as it applies to strain rate sensitive materials. 2. Assess the present level of investigations on the mechanical behaviour of superplastics. 3. Formulate the main issues and challenges in mechanics ofsuperplasticity. 4. Analyse the mathematical models/constitutive equations for superplastic flow from the viewpoint of mechanics. 5. Review the models of superplastic metal working processes. 6. Indicate with examples new results that may be obtained using the methods of mechanics of solids.

A critical, up to date, tutorial review and discussion of the science and technology of nanostructured metallic and ceramic materials. The focus is on the synthesis and processing of nanoparticles, the assembly and stability of nanostructures, characterization and properties, and applications. There is a growing interest in the processing of nanoparticles into consolidated bulk materials and coatings. The metastability of nanoparticles may lead to undesirable grain growth during thermally assisted consolidation or other processing routes, and the retention of nanostructures in a processed part or component continues to attract a great deal of attention. Current activity is concentrating on the deposition of nanostructured coatings using established thermal spray technology and wet chemistry methods. Naturally existing or artificially synthesized templates with unique structures and morphologies have been used to fabricate nanostructured materials with the same structural and morphological characteristics as the templates. Recent advances in characterization techniques have provided information on the structure, the surface and bulk chemistry of nanoparticles, and the structures and chemistry of exposed and buried surfaces of coatings. Contributors are drawn from Canada, France, UK, USA, Belarus, Russia and Ukraine.

This volume contains the papers presented at the First Mexico-U.S.A. Symposium on Materials Sciences and Engineering held in Ixtapa, Guerrero, Mexico, during Septem ber 24-27, 1991. The conference was conceived with the primary objective of increas ing the close ties between scientists and engineers in both Mexico and the U.S. with an interest in materials. The conference itself would have not taken place without the drive, determination and technical knowledge of John K. Tien of the University of Texas at Austin and of Francisco Mejia Lira of the Universidad de San Luis Potosi. This book is dedicated to their memory. The event brought together materials scientists and engineers with interests in a broad range of subjects in the processing, characterization and properties of advanced materials. Several papers were dedicated to structural materials ranging from ferrous alloys to intemetallics, ceramics and composites. The presentation covered properties, processing, and factors that control their use, such as fatigue and corrosion. Other materials and properties were also explored by U.S. and Mexican participants. Sev eral papers dealt with the characterization and properties of magnetics, optical and superconductor materials, nanostructured materials, as well as with computational and theoretical aspects likely to impact future materials research and development.

ICSAM-97 Proceedings of the 1997 International Conference on Superplasticity in Advanced Materials (ICSAM-97), Bangalore, India, January 1997