This book is about the various methods of installing rigid subsea/submarine pipelines, such as the common methods using S-lay, J-lay, and reel-lay vessels. Other methods like the surface tow, bottom pull, and various other pipeline tow methods are also utilized. It also addresses supplementary activities required as part of a pipeline installation program, such as pipe manufacture and coating, seabed intervention, riser installation, pipeline precommissioning, and pipeline repairs. This book was written for students and newcomers to the oil and gas industry who have little or no knowledge of pipeline construction. Unlike other technical books on pipelines, this one does not address the detailed design of pipelines. Instead, it provides an overview of construction methodologies for subsea pipelines. As such, this book will provide the readers with a different perspective by providing a practical and illustrative approach to explain and illustrate how subsea pipelines can be installed through various methods. The author has used examples from some of his past projects. Where available, he also highlighted the various aspects of the work, and in some cases, he has provided the lessons that he learned from his past experiences so that readers may learn from the author’s experiences too.

This comprehensive handbook on submarine pipeline systems covers a broad spectrum of topics from planning and site investigations, procurement and design, to installation and commissioning. It considers guidelines for the choice of design parameters, calculation methods and construction procedures. It is based on limit state design with partial safety coefficients.

Offshore Pipelines covers the full scope of pipeline development from pipeline designing, installing, and testing to operating. It gathers the authors' experiences gained through years of designing, installing, testing, and operating submarine pipelines. The aim is to provide engineers and management personnel a guideline to achieve cost-effective management in their offshore and deepwater pipeline development and operations. The book is organized into three parts. Part I presents design practices used in developing submarine oil and gas pipelines and risers. Contents of this part include selection of pipe size, coating, and insulation. Part II provides guidelines for pipeline installations. It focuses on controlling bending stresses and pipe stability during laying pipelines. Part III deals with problems that occur during pipeline operations. Topics covered include pipeline testing and commissioning, flow assurance engineering, and pigging operations. This book is written primarily for new and experienced engineers and management personnel who work on oil and gas pipelines in offshore and deepwater. It can also be used as a reference for college students of undergraduate and graduate levels in Ocean Engineering, Mechanical Engineering, and Petroleum Engineering.* Pipeline design engineers will learn how to design low-cost pipelines allowing long-term operability and safety.* Pipeline operation engineers and management personnel will learn how to operate their pipeline systems in a cost effective manner.* Deepwater pipelining is a new technology developed in the past ten years and growing quickly.

As deepwater wells are drilled to greater depths, pipeline engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Subsea Pipeline Design, Analysis and Installation is based on the authors' 30 years of experience in offshore. The authors provide rigorous coverage of the entire spectrum of subjects in the discipline, from pipe installation and routing selection and planning to design, construction, and installation of pipelines in some of the harshest underwater environments around the world. All-inclusive, this must-have handbook covers the latest breakthroughs in subjects such as corrosion prevention, pipeline inspection, and welding, while offering an easy-to-understand guide to new design codes currently followed in the United States, United Kingdom, Norway, and other countries. - Gain expert coverage of international design codes - Understand how to design pipelines and risers for today's deepwater oil and gas - Master critical equipment such as subsea control systems and pressure piping

• Updated edition of a best-selling title • Author brings 25 years experience to the work • Addresses the key issues of economy and environment Marine pipelines for the transportation of oil and gas have become a safe and reliable way to exploit the valuable resources below the world's seas and oceans. The design of these pipelines is a relatively new technology and continues to evolve in its quest to reduce costs and minimise the effect on the environment. With over 25years experience, Professor Yong Bai has been able to assimilate the essence of the applied mechanics aspects of offshore pipeline system design in a form of value to students and designers alike. It represents an excellent source of up to date practices and knowledge to help equip those who wish to be part of the exciting future of this industry.

Subsea production systems, overview of subsea engineering, subsea field development, subsea distribution system. Flow assurance and system engineering. Susea structure and equiment. Subsea umbilical, risers and flowlines.

Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. - Updates to major codes and standards such as ASME B31.1 and B31.12 - New methods for calculating stress intensification factor (SIF) and seismic activities - Risk-based analysis based on API 579, and B31-G - Covers the Pipeline Safety Act and the creation of PhMSA

A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. - Prolong the structural life of your offshore platforms and pipelines - Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings - Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.

This comprehensive manual of water supply practices explains the design, selection, specification, installation, transportation, and pressure testing of concrete pressure pipes in potable water service.

* Each chapter is written by one or more invited world-renowned experts * Information provided in handy reference tables and design charts* Numerous examples demonstrate how the theory outlined in the book is applied in the design of structuresTremendous strides have been made in the last decades in the advancement of offshore exploration and production of minerals. This book fills the need for a practical reference work for the state-of-the-art in offshore engineering. All the basic background material and its application in offshore engineering is covered. Particular emphasis is placed in the application of the theory to practical problems. It includes the practical aspects of the offshore structures with handy design guides, simple description of the various components of the offshore engineering and their functions. The primary purpose of the book is to provide the important practical aspects of offshore engineering without going into the nitty-gritty of the actual detailed design.· Provides all the important practical aspects of ocean engineering without going into the 'nitty-gritty' of actual design details·· Simple to use - with handy design guides, references tables and charts·· Numerous examples demonstrate how theory is applied in the design of structures