Structure-borne sound sources are vibrational sources connected in some way to the building structure. The mechanical excitation of the building structure leads to sound radiation. This is an important source of annoyance in modern light-weight buildings. The prediction of the sound pressure level from structure-borne sound sources is highly complicated because of the complexity involved in the coupling between source and receiver structure. The current standard on characterisation of service equipment in buildings EN 12354-5, can deal with sources on heavy structures (high-mobility source) but to date, there is no engineering method available for the case of coupling between source and receiver. A case study of a washing machine on a wooden joist floor is investigated in this thesis. In the first part, measurements in the coupled state are conducted. It is shown that the normal components are sufficient to predict the sound pressure level. However, this only applies to the coupled state. In the second part, a true prediction is calculated from independently measured source and receiver quantities. The difference between predicted and directly measured sound pressure level leads to considerable errors of up to 20 dB at low frequencies. This shows that the normal components are not sufficient to predict the coupling between a washing machine and a wooden floor.

Since structure-borne sound plays an important role in noise control, material testing and machine diagnosis, the relevant properties of the most important elements of a construction (plates, beams and shells) are investigated. Measurement techniques, equations of motion, formulas for wave speeds, resonance frequencies, impedances, transmission coefficients etc. are given. The different damping mechanisms and the radiation properties are treated. The statistical energy analysis (SEA) is also presented. This new edition has been enlarged to include also waves on orthotropic plates, and the vibration and radiation of cylindrical shells.

As a comprehensive reference dedicated to sound and vibration in buildings, Building Acoustics and Vibration addresses the basic and advanced principles that can be used to solve practical and theoretical problems typically encountered in building and architectural acoustic practices. In addition, physical and mathematical concepts are introduced and developed sufficiently to make this publication a self-contained and up-to-date source of information for readers. Building Acoustics and Vibration is a must-have textbook for engineering students, engineers, and consultants involved in the sound, vibrations and building environment. With comprehensibility and versatility in the presentation of knowledge, this highly anticipated publication will easily fill the gap in the literature of building engineering and sciences, which presently lacks an authoritative guide on the theoretical and practical aspects of building acoustics and vibration.

The book explains sound insulation in buildings at a level suitable for both graduate students and expert consultants. Theoretical models are set out for sound transmission in buildings, with an emphasis on thick and heavy constructions. Thus, the description is not restrained by the common assumption of bending waves which is characteristic of thin plates, only. A general description is provided, with the modal density in the structures as a key parameter. At low frequencies statistical energy analysis is replaced by modal energy analysis. Sound transmission through windows and facades is represented by a model that allows any angle on incidence, including the special case of grazing incidence. One chapter is devoted to the subjective evaluation of sound insulation, particularly noise from neighbours, and how this can be applied in a sound classification scheme for dwellings. Measurement methods in building acoustics are presented with emphasis on modern methods using MLS signals or sine sweeps. The analysis and estimation of measurement uncertainty is discussed in detail. In a final chapter examples of experimental buildings with high sound insulation are explained.

Building Systems for interior designers Second Edition Corky Binggeli, asid The updated guide to technical building systems for interior designers As integral members of the building design team, interior designers share an increasingly complex and crucial role. Now revised in its second edition, Building Systems for Interior Designers remains the one go-to resource that addresses the special concerns of the interior designer within the broader context of the rest of the building design team. Building Systems for Interior Designers, Second Edition explains technical building systems and engineering issues in a clear and accessible way to interior designers. Covering systems from HVAC to water and waste to lighting, transportation, and safety, author Corky Binggeli enables interior designers to communicate more effectively with architects, engineers, and contractors; collaborate effectively on projects; and contribute to more accurate solutions for a broad range of building considerations. Among the many improvements in the Second Edition are: A deeper engagement with sustainable building design, giving the interior designer the resources needed to participate as part of a sustainable design team A reshaped structure that enhances the reader's understanding of the material Many more illustrations and explanatory captions With a host of features to make the book more up to date, easier to use, and more effective as an instructive guide, Building Systems for Interior Designers, Second Edition is a valuable book for students as well as a practical desktop reference for professionals.