This book contains full papers presented at the First Virtual Conference on Mechanical Fatigue (VCMF 2020), which was organised by the University of Porto (FEUP, Portugal), the Wroclaw University of Science and Technology (Poland), University of Electronic Science and Technology of China (China), Siberian Federal University (Russia), and the ESIS/TC12 Technical Committee (European Structural Integrity Society–ESIS), between 9 and 11 of September 2020. This conference was intended to be a forum of discussion of new research concepts, equipment, technology, materials and structures and other scientific advances within the field of mechanical fatigue and fracture. The first edition of the VCMF 2020 event has reached more than 60 participants from more than 20 nationalities demonstrating the vitality of this new event.

This book presents fractography and failure analysis at a level that is accessible for non-expert readers, without losing scientific rigor. It offers a comprehensive description of fracture surfaces in engineering materials, with an emphasis on metals, and of the methodology for the observation of fracture surfaces. It also discusses in detail the main fracture mechanisms and their corresponding fracture surfaces, including brittle, ductile, fatigue, and environmental fractures. The last chapter is dedicated to the use of fractography in determining of the causes component failure. In modern engineering, the analysis of fractured components is a common practice in many fields, such as integrity management systems, materials science research, and failure investigations. As such this book is useful for engineers, scientists, engineering students, loss adjuster surveyors and any professional dealing with fractured components.

Fracture, fatigue, and other subcritical processes, such as creep crack growth or stress corrosion cracking, present numerous open issues from both scientific and industrial points of view. These phenomena are of special interest in industrial and civil metallic structures, such as pipes, vessels, machinery, aircrafts, ship hulls, and bridges, given that their failure may imply catastrophic consequences for human life, the natural environment, and/or the economy. Moreover, an adequate management of their operational life, defining suitable inspection periods, repairs, or replacements, requires their safety or unsafety conditions to be defined. The analysis of these technological challenges requires accurate comprehensive assessment tools based on solid theoretical foundations as well as structural integrity assessment standards or procedures incorporating such tools into industrial practice.

"This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.

Avoiding or controlling fatigue damage is a major issue in the design and inspection of welded structures subjected to dynamic loading. Life predictions are usually used for safe life analysis, i.e. for verifying that it is very unlikely that fatigue damage will occur during the target service life of a structure. Damage tolerance analysis is used for predicting the behavior of a fatigue crack and for planning of in-service scheduled inspections. It should be a high probability that any cracks appearing are detected and repaired before they become critical. In both safe life analysis and the damage tolerance analysis there may be large uncertainties involved that have to be treated in a logical and consistent manner by stochastic modeling. This book focuses on fatigue life predictions and damage tolerance analysis of welded joints and is divided into three parts. The first part outlines the common practice used for safe life and damage tolerance analysis with reference to rules and regulations. The second part emphasises stochastic modeling and decision-making under uncertainty, while the final part is devoted to recent advances within fatigue research on welded joints. Industrial examples that are included are mainly dealing with offshore steel structures. Spreadsheets which accompany the book give the reader the possibility for hands-on experience of fatigue life predictions, crack growth analysis and inspection planning. As such, these different areas will be of use to engineers and researchers.

Discusses applications of failures and evaluation techniques to a variety of industries. * Presents a unified approach using two key elements of structural design.

This book is a printed edition of the Special Issue "Fatigue Damage" that was published in Metals

The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.

Applied Optimal Design Mechanical and Structural Systems Edward J. Haug & Jasbir S. Arora This computer-aided design text presents and illustrates techniques for optimizing the design of a wide variety of mechanical and structural systems through the use of nonlinear programming and optimal control theory. A state space method is adopted that incorporates the system model as an integral part of the design formulations. Step-by-step numerical algorithms are given for each method of optimal design. Basic properties of the equations of mechanics are used to carry out design sensitivity analysis and optimization, with numerical efficiency and generality that is in most cases an order of magnitude faster in digital computation than applications using standard nonlinear programming methods. 1979 Optimum Design of Mechanical Elements, 2nd Ed. Ray C. Johnson The two basic optimization techniques, the method of optimal design (MOD) and automated optimal design (AOD), discussed in this valuable work can be applied to the optimal design of mechanical elements commonly found in machinery, mechanisms, mechanical assemblages, products, and structures. The many illustrative examples used to explicate these techniques include such topics as tensile bars, torsion bars, shafts in combined loading, helical and spur gears, helical springs, and hydrostatic journal bearings. The author covers curve fitting, equation simplification, material properties, and failure theories, as well as the effects of manufacturing errors on product performance and the need for a factor of safety in design work. 1980 Globally Optimal Design Douglass J. Wilde Here are new analytic optimization procedures effective where numerical methods either take too long or do not provide correct answers. This book uses mathematics sparingly, proving only results generated by examples. It defines simple design methods guaranteed to give the global, rather than any local, optimum through computations easy enough to be done on a manual calculator. The author confronts realistic situations: determining critical constraints; dealing with negative contributions; handling power function; tackling logarithmic and exponential nonlinearities; coping with standard sizes and indivisible components; and resolving conflicting objectives and logical restrictions. Special mathematical structures are exposed and used to solve design problems. 1978