This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended options for tailor-made bonding solutions have to be stated. Apart from melamine-urea and phenolic-resorcinol adhesives, one-component-polyurethanes, emulsion isocyanate polymers and epoxies offer a wide range of possibilities. The contributions dealing with experimental and numerical investigations on static, cyclic and seismic behavior of structures clearly reveal the enhanced potential of modern timber construction for reliable and sustainable buildings and bridges of the new millennium. The book is structured in nine thematic areas, being I) Structures II) Mechanical Connections III) Glued Joints and Adhesives IV) Timber and Concrete/Cement/Polymer Composites V) Cyclic, Seismic Behavior VI) Hardwood, Modified Wood and Bamboo VII) Cross-Laminated Timber VIII) Properties and Testing of Wood IX) Glulam

Structural Timber Design is a comprehensive textbook that provides students of building and civil engineering courses with a wealth of information and in-depth guidance on design methods to the recently revised BS 5268 : Part 2 and the proposed Eurocode 5. It is also an invaluable reference source and design aid for practising engineers and architects. The text provides a step-by-step approach to the design of all the most commonly used timber elements and connections (illustrated by detailed work examples), and encourages the use of computers to carry out design calculations. I t covers the characteristics of timber; a review of BS 5268: Part 2 and its requirements; the design of beams and columns of solid, glued laminated and composite sections and mechanical and glued timber connections. The book also reviews the proposed Eurocode 5 and its limit states requirements, including the design of flexural and axially loaded members and connections.

Timber, steel, and concrete are common engineering materials used in structural design. Material choice depends upon the type of structure, availability of material, and the preference of the designer. The design practices the code requirements of each material are very different. In this updated edition, the elemental designs of individual components of each material are presented, together with theory of structures essential for the design. Numerous examples of complete structural designs have been included. A comprehensive database comprising materials properties, section properties, specifications, and design aids, has been included to make this essential reading.

A concise guide to the structural design of low-rise buildings in cold-formed steel, reinforced masonry, and structural timber This practical reference discusses the types of low-rise building structural systems, outlines the design process, and explains how to determine structural loadings and load paths pertinent to low-rise buildings. Characteristics and properties of materials used in the construction of cold-formed steel, reinforced masonry, and structural timber buildings are described along with design requirements. The book also provides an overview of noncomposite and composite open-web joist floor systems. Design code requirements referenced by the 2009 International Building Code are used throughout. This is an ideal resource for structural engineering students, professionals, and those preparing for licensing examinations. Structural Design of Low-Rise Buildings in Cold-Formed Steel, Reinforced Masonry, and Structural Timber covers: Low-rise building systems Loads and load paths in low-rise buildings Design of cold-formed steel structures Structural design of reinforced masonry Design of structural timber Structural design with open-web joists

Wood is usually perceived as a "traditional" material. However, the properties of this material have now for some time made it possible to design free shapes and highly complex structures. Today, the wood laboratory of the EPF Lausanne, which was originally founded by Julius Natterer, is testing the production of origami structures, ribbed shells, fabric structures and curved panels under the guidance of Professor Weinand using digital calculation and computer-aided processing methods. The research results are tested in prototypes, which demonstrate the potential applications in large-scale timber buildings. By exploring the hitherto unused potential of wood as a construction material, this book provides an exciting and inspiring outlook on a new generation of timber buildings.

By presenting the work of the RILEM Technical Committee 245-RTE, the book provides an overview of the existing techniques for the reinforcement of timber elements, joints and structures. It consists of two parts: part I examines state-of-the-art information on reinforcement techniques, summarizes the current status of standardization, and covers STS, GiR, FRP and nanotechnology. In part II several applications of reinforcement are discussed: these include traditional structures, traditional timber frame walls, light-frame shear walls, roofs, floors, and carpentry joints. The book will benefit academics, practitioners, industry and standardization committees interested in the reinforcement of existing timber elements, joints and structures.

The prime purpose of this book is to serve as a design is of considerable value in helping the classroom text for the engineering or architec student make the transition from the often sim ture student. It will, however, also be useful to plistic classroom exercises to problems of the designers who are already familiar with design real world. Problems for solution by the student in other materials (steel, concrete, masonry) but follow the same idea. The first problems in each need to strengthen, refresh, or update their capa subject are the usual textbook-type problems, bility to do structural design in wood. Design but in most chapters these are followed by prob principles for various structural materials are lems requiring the student to make structural similar, but there are significant differences. planning decisions as well. The student may be This book shows what they are. required, given a load source, to find the magni The book has features that the authors believe tude of the applied loads and decide upon a set it apart from other books on wood structural grade of wood. Given a floor plan, the student design. One of these is an abundance of solved may be required to determine a layout of struc examples. Another is its treatment of loads. This tural members. The authors have used most of book will show how actual member loads are the problems in their classes, so the problems computed. The authors have found that students, have been tested.

A straightforward overview of the fundamentals of steel structure design This hands-on structural engineering guide provides concise, easy-to-understand explanations of the design and behavior of steel columns, beams, members, and connections. Ideal for preparing you for the field, Design of Steel Structures includes real-world examples that demonstrate practical applications of AISC 360 specifications. You will get an introduction to more advanced topics, including connections, composite members, plate girders, and torsion. This textbook also includes access to companion online videos that help connect theory to practice. Coverage includes: Structural systems and elements Design considerations Tension members Design of columns AISC design requirements Design of beams Torsion Stress analysis and design considerations Beam-columns Connections Plate girders Intermediate transverse and bearing stiffeners

* The best-selling text and reference on wood structure design * Incorporates the latest National Design Specifications, the 2003 International Building Code and the latest information on wind and seismic loads