During the past several years I have been engaged in applied research related to the stability analysis of slopes. This research was supported by the Institute for Mining and Minerals Research, University of Kentucky, in response to the Surface Mining Control and Reclamation Act of 1977, which requires stability analysis for refuse dams, hollow fills, and spoil banks created by surface mining. The results of the research have been published in several journals and reports and also presented in a number of short courses. Both the sim plified and the computerized methods of stability analysis, as developed from this research, have been widely used by practicing engineers throughout Ken tucky for the application of mining permits. The large number of out-of-state participants in the short courses indicates that the methods developed have widespread applications. This book is a practical treatise on the stability analysis of earth slopes. Special emphasis is placed on the utility and application of stablity formulas, charts, and computer programs developed recently by the author for the analy sis of human-created slopes. These analyses can be used for the design of new slopes and the assessment of remedial measures on existing slopes. To make the book more complete as a treatise on slope stability analysis, other methods of stability analysis, in addition to those developed by the author, are briefly discussed. It is hoped that this book will be a useful reference, class room text, and users' manual for people interested in learning about stability analysis.

A number of methods currently exist for the analysis and design of slopes. This book provides a critical review of these and offers several more appropriate approaches for overcoming numerical convergence and the location of critical failure surfaces in two-dimensional and three-dimensional cases. New concepts in three-dimensional stability analysis, finite element analysis and the extension of slope stability problems to lateral earth pressure problems are also addressed. It gives helpful practical advice and design resources in the form of recommendations for good analysis and design practice, design charts and tables for the engineer. Limitations are detailed of both limit equilibrium and the finite element method in the assessment of the stability of a slope, and guidance is provided for assessing the fundamental assumptions and limitations of stability analysis methods and computer modelling. The book provides ample examples to illustrate how this range of problems should be dealt with. The final chapter touches on design and its implementation on site. The emphasis is on the transfer of the design to its physical implementation on site in a holistic way, taking full account of the latest developments in construction technology. Engineering and construction problems tend to be pigeonholed into different classes of problem such as slope stability, bearing capacity and earth pressure behind retaining structures. This is quite unnecessary. This book offers a unified approach, which is conceptually, practically and philosophically more satisfying.

More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.

The definitive guide to the critical issue of slope stability and safety Soil Strength and Slope Stability, Second Edition presents the latest thinking and techniques in the assessment of natural and man-made slopes, and the factors that cause them to survive or crumble. Using clear, concise language and practical examples, the book explains the practical aspects of geotechnical engineering as applied to slopes and embankments. The new second edition includes a thorough discussion on the use of analysis software, providing the background to understand what the software is doing, along with several methods of manual analysis that allow readers to verify software results. The book also includes a new case study about Hurricane Katrina failures at 17th Street and London Avenue Canal, plus additional case studies that frame the principles and techniques described. Slope stability is a critical element of geotechnical engineering, involved in virtually every civil engineering project, especially highway development. Soil Strength and Slope Stability fills the gap in industry literature by providing practical information on the subject without including extraneous theory that may distract from the application. This balanced approach provides clear guidance for professionals in the field, while remaining comprehensive enough for use as a graduate-level text. Topics include: Mechanics of soil and limit equilibrium procedures Analyzing slope stability, rapid drawdown, and partial consolidation Safety, reliability, and stability analyses Reinforced slopes, stabilization, and repair The book also describes examples and causes of slope failure and stability conditions for analysis, and includes an appendix of slope stability charts. Given how vital slope stability is to public safety, a comprehensive resource for analysis and practical action is a valuable tool. Soil Strength and Slope Stability is the definitive guide to the subject, proving useful both in the classroom and in the field.

Yang H. Huang presents fundamental principles and methods for using the limit equilibrium method in analyzing slope stability for the safe design of earth slopes.

This book is aimed at the practising engineer and engineering geologist working in tropical environments, where lands lides are mainly triggered by rain fall. This book is based on a similar work published in 1999 in Portuguese, which became the Rio de Janeiro Slope Manual. This book is an engineering guide for the design of slopes and stabilisation works in rocks and residual soils. It evolves from the cumulative experience gathered by several engineers and geologists who faced severe slope problems. The authors' experience throughout Central and South America (Costa Rica, Argentina, Bolivia, Peru, Ecuador and Venezuela) and the Far East, especially Hong Kong and Malaysia, was used as a foundation for writing this book. The work also benefits enormously from the time spent in Hong Kong in 1996 and 1997 by the first editor on sabbatical at the City University of Hong Kong, and the discussions he had with many colleagues from the Geotechnical Engineering Office (GEO) of the Hong Kong Government, especially Dr. A. Malone, Mr. w.K. Pun, Dr. A. Li, Mr. K. Ho, and Mr. y.c. Chan among others.

This volume comprises select papers presented during the Indian Geotechnical Conference 2018, discussing issues and challenges relating to the characterization of geomaterials, modelling approaches, and geotechnical engineering education. With a combination of field studies, laboratory experiments and modelling approaches, the chapters in this volume address some of the most widely investigated geotechnical engineering topics. This volume will be of interest to researchers and practitioners alike.

A major revision of the comprehensive text/reference Written by world-leading geotechnical engineers who share almost 100 years of combined experience, Slope Stability and Stabilization, Second Edition assembles the background information, theory, analytical methods, design and construction approaches, and practical examples necessary to carry out a complete slope stability project. Retaining the best features of the previous edition, this new book has been completely updated to address the latest trends and methodology in the field. Features include: All-new chapters on shallow failures and stability of landfill slopes New material on probabilistic stability analysis, cost analysis of stabilization alternatives, and state-of-the-art techniques in time-domain reflectometry to help engineers plan and model new designs Tested and FHA-approved procedures for the geotechnical stage of highway, tunnel, and bridge projects Sound guidance for geotechnical stage design and planning for virtually all types of construction projects Slope Stability and Stabilization, Second Edition is filled with current and comprehensive information, making it one of the best resources available on the subject-and an essential reference for today's and tomorrow's professionals in geology, geotechnical engineering, soil science, and landscape architecture.

GSP 101 contains 26 papers on slope stability presented at sessions at Geo-Denver 2000, held in Denver, Colorado, August 5-8, 2000.

This volume deals with numerical simulation of coupled problems in soil mechanics and foundations. It contains analysis of both shallow and deep foundations. Several nonlinear problems are considered including, soil plasticity, cracking, reaching the soil bearing capacity, creep, etc. Dynamic analysis together with stability analysis are also included. Several numerical models of dams are considered together with coupled problems in soil mechanics and foundations. It gives wide range of modelling soil in different parts of the world. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.