This thesis consists of a fatigue study carried out on an aluminum alloy 2024-T3 in both time domain and frequency domain. Non-zero mean random signals of strain and stress are analyzed in time domain using usual Rainflow method and the damage is accumulated with the Palmgren-Miner rule, according to mean stress equations. The signals are analyzed in frequency domain using the power spectral density and the probability density function. The spectral domain analysis does not consider the negative effect of the mean stress in metal life under fatigue, so the correction factors for mean stresses developed by Goodman, Morrow, and Smith-Watson-Topper are used to change the power spectral density and, thus, the damage calculated by the probability density functions postulated by Dirlik and Tovo and Benasciutti. It is found that both Dirlik and Tovo and Benasciutti are non-conservative for a non-zero mean stress signal when comparing the damage to the one obtained in time domain analysis. When the spectral method is corrected, the results vary from Rainflow 4.9% for wide band and 6.8% for narrow band signals, always in the conservative zone, therefore predicting more damage. Tovo and Benasciutti 2 method is found to be the spectral function with the closest results when compared to the usual Rainflow method in time domain.

About the Series: This important new series of five volumes has been written with both the professional engineers and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and crucially important areas of mechanical engineering, from both the theoretical and practical standpoints. As all products need to be designed to withstand the environmental conditions to which they are likely to be subjected, prototypes must be verified by calculation and laboratory tests, the latter according to specifications from national or international standards. The concept of tailoring the product to its environment has gradually developed whereby, from the very start of a design project, through the to the standards specifications and testing procedures on th e prototype, the real environment in which the product being tested will be functioning is taken into account. The five volumes of Mechanical Shock and Vibration cover all the issues that need to be addressed in this area of mechanical engineering. The theoretical analyses are placed in the context of the real world and of laboratory tests - essential for the development of specifications. Volume IV: Fatigue Damage Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also employed for a specifciation representing the effects produced by the set of vibrations imposed in a real environment. In this volume, which is devoted to the calculation of fatigue damage, the author explores the hypotheses adopted to describe the behavior of material suffering fatigue and the laws of fatigue accumulation. He also considers the methods of counting the response peaks, which are used to establish the histogram when it is impossible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested.

This third volume of eight from the IMAC - XXXII Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Linear Systems Substructure Modelling Adaptive Structures Experimental Techniques Analytical Methods Damage Detection Damping of Materials & Members Modal Parameter Identification Modal Testing Methods System Identification Active Control Modal Parameter Estimation Processing Modal Data

Trends in the Analysis and Design of Marine Structures is a collection of the papers presented at MARSTRUCT 2019, the 7th International Conference on Marine Structures held in Dubrovnik, Croatia, 6-8 May 2019. The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, the fifth in Southampton, UK in March 2015, and the sixth in Lisbon, Portugal in May 2017. This Conference series specialises in dealing with Ships and Offshore Structures, addressing topics in the fields of: - Methods and Tools for Loads and Load Effects - Methods and Tools for Strength Assessment - Experimental Analysis of Structures - Materials and Fabrication of Structures - Methods and Tools for Structural Design and Optimisation - Structural Reliability, Safety and Environmental Protection. Trends in the Analysis and Design of Marine Structures is an essential document for academics, engineers and all professionals involved in the area of analysis and design of Ships and Offshore Structures. About the series: The ‘Proceedings in Marine Technology and Ocean Engineering’ series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

This book gives an overview on the fatigue of materials under non-proportional loads. It presents the rich spectrum of phenomena and treats various computational models to mathematically describe the non-proportional fatigue of materials.

Selected, peer reviewed papers from the 2012 International Conference on Applied Mechanics and Materials (ICAMM 2012), November 24-25, 2012, Sanya, China

The book explores the pertinent aspects of sustainability of green and eco-friendly composites including their development methods and processing, characterization, properties, and applications. Significance for the design and engineering of high-performance green and eco-friendly composites is discussed in the present book. Insights on a wide spectrum of potential advanced applications ranging from automotive and aerospace to biomedical and packaging, etc. using these are highlighted. Further, it discusses life cycle and carbon footprint assessment of sustainable materials. Features: Explores different processing methods of green and eco-friendly composites Discusses development and optimization of green nanocomposites for sustainable manufacturing Collates modern green and eco-friendly composites research from theory to application Covers hybridization of reinforced fibers on the performance of green and eco-friendly composites Analyzes and discusses calculation of carbon footprint and Life Cycle Assessment of composites This book is aimed at graduate students and researchers in materials science and engineering, sustainable materials, composites, and nanomaterials.

The purpose of this Handbook is to provide a review of the knowledge and experiences in the field of fatigue fracture mechanics. It is well-known that engineering structures can fail due to cyclic loading. For instance, a cyclically time-varying loading reduces the structure strength and can provoke a fatigue failure consisting of three stages: (a) crack initiation (b) crack propagation and (c) catastrophic failure. Since last century many scientists have tried to understand the reasons for the above-mentioned failures and how to prevent them. This Handbook contains valuable contributions from leading experts within the international scientific community and covers many of the important problems associated with the fatigue phenomena in civil, mechanical and nuclear engineering.

Modern systems have become increasingly complex to design and build, while the demand for reliability and cost-effective enhancement continues. Robust international competition has further intensified the need for all designers, managers, practitioners, scientists, and engineers to ensure a level of reliability of their products and processes before release at the lowest cost. Developments in Reliability Engineering equips its audience with the necessary information to keep up with the latest original research and state-of-the-art advances in reliability engineering. The volume offers an excursus from historical theories and methods to the present-world practical utility of these concepts with worked-out examples. - Guides readers through reliability topics from an historical perspective to new research results, advancements, and latest developments - Draws on the authors' experience of reliability analysis in a range of industries and disciplines, showing the need for reliability from the product design stage right through to aftercare - Provides methods throughout, making this title a good source of actionable information

Mechanical Vibration and Shock Analysis, Second Edition Volume 1: Sinusoidal Vibration The relative and absolute response of a mechanical system with a single degree of freedom is considered for arbitrary excitation, and its transfer function defined in various forms. The characteristics of sinusoidal vibration are examined in the context both of the real world and of laboratory tests, and for both transient and steady state response of the single-degree-of-freedom system. Viscous damping and then nonlinear damping are considered. The various types of swept sine perturbations and their properties are described and, for the one-degree-of-freedom system, the consequence of an inappropriate choice of sweep rate are considered. From the latter, rules governing the choice of suitable sweep rates are developed. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.