The growing commercial market of Microwave/ Millimeter wave industry over the past decade has led to the explosion of interests and opportunities for the design and development of microwave components.The design of most microwave components requires the use of commercially available electromagnetic (EM) simulation tools for their analysis. In the design process, the simulations are carried out by varying the design parameters until the desired response is obtained. The optimization of design parameters by manual searching is a cumbersome and time consuming process. Soft computing methods such as Genetic Algorithm (GA), Artificial Neural Network (ANN) and Fuzzy Logic (FL) have been widely used by EM researchers for microwave design since last decade. The aim of these methods is to tolerate imprecision, uncertainty, and approximation to achieve robust and low cost solution in a small time frame. Modeling and optimization are essential parts and powerful tools for the microwave/millimeter wave design. This book deals with the development and use of soft computing methods for tackling challenging design problems in the microwave/millimeter wave domain. The aim in the development of these methods is to obtain the design in small time frame while improving the accuracy of the design for a wide range of applications. To achieve this goal, a few diverse design problems of microwave field, representing varied challenges in the design, such as different microstrip antennas, microwave filters, a microstrip-via and also some critical high power components such as nonlinear tapers and RF-windows are considered as case-study design problems. Different design methodologies are developed for these applications. The presents soft computing methods, their review for microwave/millimeter wave design problems and specific case-study problems to infuse better insight and understanding of the subject.

The growing commercial market of Microwave/ Millimeter wave industry over the past decade has led to the explosion of interests and opportunities for the design and development of microwave components.The design of most microwave components requires the use of commercially available electromagnetic (EM) simulation tools for their analysis. In the design process, the simulations are carried out by varying the design parameters until the desired response is obtained. The optimization of design parameters by manual searching is a cumbersome and time consuming process. Soft computing methods such as Genetic Algorithm (GA), Artificial Neural Network (ANN) and Fuzzy Logic (FL) have been widely used by EM researchers for microwave design since last decade. The aim of these methods is to tolerate imprecision, uncertainty, and approximation to achieve robust and low cost solution in a small time frame. Modeling and optimization are essential parts and powerful tools for the microwave/millimeter wave design. This book deals with the development and use of soft computing methods for tackling challenging design problems in the microwave/millimeter wave domain. The aim in the development of these methods is to obtain the design in small time frame while improving the accuracy of the design for a wide range of applications. To achieve this goal, a few diverse design problems of microwave field, representing varied challenges in the design, such as different microstrip antennas, microwave filters, a microstrip-via and also some critical high power components such as nonlinear tapers and RF-windows are considered as case-study design problems. Different design methodologies are developed for these applications. The presents soft computing methods, their review for microwave/millimeter wave design problems and specific case-study problems to infuse better insight and understanding of the subject.

This Special Edited Volume is a unique approach towards Computational solution for the upcoming field of study called Vision Science. From a scientific firmament Optics, Ophthalmology, and Optical Science has surpassed an Odyssey of optimizing configurations of Optical systems, Surveillance Cameras and other Nano optical devices with the metaphor of Nano Science and Technology. Still these systems are falling short of its computational aspect to achieve the pinnacle of human vision system. In this edited volume much attention has been given to address the coupling issues Computational Science and Vision Studies. It is a comprehensive collection of research works addressing various related areas of Vision Science like Visual Perception and Visual system, Cognitive Psychology, Neuroscience, Psychophysics and Ophthalmology, linguistic relativity, color vision etc. This issue carries some latest developments in the form of research articles and presentations. The volume is rich of contents with technical tools for convenient experimentation in Vision Science. There are 18 research papers having significance in an array of application areas. The volume claims to be an effective compendium of computing developments like Frequent Pattern Mining, Genetic Algorithm, Gabor Filter, Support Vector Machine, Region Based Mask Filter, 4D stereo camera systems, Principal Component Analysis etc. The detailed analysis of the papers can immensely benefit to the researchers of this domain. It can be an Endeavour in the pursuit of adding value in the existing stock of knowledge in Vision Science.

Applying computational intelligence for product design is a fast-growing and promising research area in computer sciences and industrial engineering. However, there is currently a lack of books, which discuss this research area. This book discusses a wide range of computational intelligence techniques for implementation on product design. It covers common issues on product design from identification of customer requirements in product design, determination of importance of customer requirements, determination of optimal design attributes, relating design attributes and customer satisfaction, integration of marketing aspects into product design, affective product design, to quality control of new products. Approaches for refinement of computational intelligence are discussed, in order to address different issues on product design. Cases studies of product design in terms of development of real-world new products are included, in order to illustrate the design procedures, as well as the effectiveness of the computational intelligence based approaches to product design. This book covers the state-of-art of computational intelligence methods for product design, which provides a clear picture to post-graduate students in industrial engineering and computer science. It is particularly suitable for researchers and professionals working on computational intelligence for product design. It provides concepts, techniques and methodologies, for product designers in applying computational intelligence to deal with product design.

Applied Computing in Medicine and Health is a comprehensive presentation of on-going investigations into current applied computing challenges and advances, with a focus on a particular class of applications, primarily artificial intelligence methods and techniques in medicine and health. Applied computing is the use of practical computer science knowledge to enable use of the latest technology and techniques in a variety of different fields ranging from business to scientific research. One of the most important and relevant areas in applied computing is the use of artificial intelligence (AI) in health and medicine. Artificial intelligence in health and medicine (AIHM) is assuming the challenge of creating and distributing tools that can support medical doctors and specialists in new endeavors. The material included covers a wide variety of interdisciplinary perspectives concerning the theory and practice of applied computing in medicine, human biology, and health care. Particular attention is given to AI-based clinical decision-making, medical knowledge engineering, knowledge-based systems in medical education and research, intelligent medical information systems, intelligent databases, intelligent devices and instruments, medical AI tools, reasoning and metareasoning in medicine, and methodological, philosophical, ethical, and intelligent medical data analysis. - Discusses applications of artificial intelligence in medical data analysis and classifications - Provides an overview of mobile health and telemedicine with specific examples and case studies - Explains how behavioral intervention technologies use smart phones to support a patient centered approach - Covers the design and implementation of medical decision support systems in clinical practice using an applied case study approach

Agent-centric theories, approaches and technologies are contributing to enrich interactions between users and computers. This book aims at highlighting the influence of the agency perspective in Human-Computer Interaction through a careful selection of research contributions. Split into five sections; Users as Agents, Agents and Accessibility, Agents and Interactions, Agent-centric Paradigms and Approaches, and Collective Agents, the book covers a wealth of novel, original and fully updated material, offering: To provide a coherent, in depth, and timely material on the agency perspective in HCI To offer an authoritative treatment of the subject matter presented by carefully selected authors To offer a balanced and broad coverage of the subject area, including, human, organizational, social, as well as technological concerns. ü To offer a hands-on-experience by covering representative case studies and offering essential design guidelines The book will appeal to a broad audience of researchers and professionals associated to software engineering, interface design, accessibility, as well as agent-based interaction paradigms and technology.

This book is the second enlarged and revised edition of the first successful monograph on complex-valued neural networks (CVNNs) published in 2006, which lends itself to graduate and undergraduate courses in electrical engineering, informatics, control engineering, mechanics, robotics, bioengineering, and other relevant fields. In the second edition the recent trends in CVNNs research are included, resulting in e.g. almost a doubled number of references. The parametron invented in 1954 is also referred to with discussion on analogy and disparity. Also various additional arguments on the advantages of the complex-valued neural networks enhancing the difference to real-valued neural networks are given in various sections. The book is useful for those beginning their studies, for instance, in adaptive signal processing for highly functional sensing and imaging, control in unknown and changing environment, robotics inspired by human neural systems, and brain-like information processing, as well as interdisciplinary studies to realize comfortable society. It is also helpful to those who carry out research and development regarding new products and services at companies. The author wrote this book hoping in particular that it provides the readers with meaningful hints to make good use of neural networks in fully practical applications. The book emphasizes basic ideas and ways of thinking. Why do we need to consider neural networks that deal with complex numbers? What advantages do the complex-valued neural networks have? What is the origin of the advantages? In what areas do they develop principal applications? This book answers these questions by describing details and examples, which will inspire the readers with new ideas. The book is useful for those beginning their studies, for instance, in adaptive signal processing for highly functional sensing and imaging, control in unknown and changing environment, robotics inspired by human neural systems, and brain-like information processing, as well as interdisciplinary studies to realize comfortable society. It is also helpful to those who carry out research and development regarding new products and services at companies. The author wrote this book hoping in particular that it provides the readers with meaningful hints to make good use of neural networks in fully practical applications. The book emphasizes basic ideas and ways of thinking. Why do we need to consider neural networks that deal with complex numbers? What advantages do the complex-valued neural networks have? What is the origin of the advantages? In what areas do they develop principal applications? This book answers these questions by describing details and examples, which will inspire the readers with new ideas.

Service orientation is emerging nowadays at multiple organizational levels in enterprise business, and it leverages technology in response to the growing need for greater business integration, flexibility and agility of manufacturing enterprises. The Service Oriented Architecture (SOA) analysed throughout the book represents a technical architecture, a business modelling concept, a type of infrastructure, an integration source and a new way of viewing units of automation within the enterprise. The primary goal of SOA is to align the business world with the world of information technology in a way that makes both more effective. The service value creation model at enterprise level consists of using a Service Component Architecture for business process applications, based on entities which handle services. In this view a service is a piece of software encapsulating the business/control logic or resource functionality of an enterprise entity that exhibits an individual competence and responds to a specific request to fulfil a local (operation) or global objective (batch production). The value creation model is based on a 2-stage approach: • Agentification: complex manufacturing processes are split in services provided by informational agents which are discovered, accessed and executed. This leads to a modular, reusable, agile and easy integrate integration. • Holonification: holons link the material flow and physical entities of the manufacturing processes with the informational part (IT services realized by distributed intelligence) facilitating thus traceability the developing of flexible control systems. This book gathers contributions from scientists, researchers and industrialists on concepts, methods, frameworks and implementing issues addressing trends in the service orientation of control technology and management applied to manufacturing enterprise. This book gathers contributions from scientists, researchers and industrialists on concepts, methods, frameworks and implementing issues addressing trends in the service orientation of control technology and management applied to manufacturing enterprise.

The development of new technologies still accelerates. As a result the requirement of easy access to high quality information is essential in modern scientific society. We believe that new cloud-based online system will replace the old system of books and magazines in the future. This is mainly because contemporary system of journal and conference publications appears to be outdated, especially in such domains as computer science, because process of publishing of an article takes too much time. In this book a new approach of sharing knowledge is proposed. The main idea behind this new approach is to take advantage of collaboration techniques used in industry to share the knowledge and build teams which work on the same subject at different locations. This will allow to accelerate the exchange of information between scientists and allow to build global teams of researchers who deal with the same scientific subjects. Furthermore, an easy access to structured knowledge will facilitate cross domain cooperation. This book describes the concept of a cross-domain platform which can be used for scientific cooperation. It also familiarizes readers with new concepts and technologies which are used in the platform and introduces the first projects which are developed using this technology. It is expected to be of special interest to researchers and professionals in computer science and mechanics.

The present book includes a set of selected extended papers from the second International Joint Conference on Computational Intelligence (IJCCI 2010), held in Valencia, Spain, from 24 to 26 October 2010. The conference was composed by three co-located conferences: The International Conference on Fuzzy Computation (ICFC), the International Conference on Evolutionary Computation (ICEC), and the International Conference on Neural Computation (ICNC). Recent progresses in scientific developments and applications in these three areas are reported in this book. IJCCI received 236 submissions, from 49 countries, in all continents. After a double blind paper review performed by the Program Committee, only 30 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 13%. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of IJCCI 2010. Commitment to high quality standards is a major concern of IJCCI that will be maintained in the next editions, considering not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, participation level and logistics.