This book describes methods used to estimate forces and deformations in structures during future earthquakes. It synthesizes the topics related to ground motions with those related to structural response and, therefore, closes the gap between geosciences and engineering. Requiring no prior knowledge, the book elucidates confusing concepts related to ground motions and structural response and enables the reader to select a suitable analysis method and implement a cost‐effective seismic design. Presents lucid, accessible descriptions of key concepts in ground motions and structural response and easy to follow descriptions of methods used in seismic analysis; Explains the roles of strength, deformability, and damping in seismic design; Reinforces concepts with real‐world examples; Stands as a ready reference for performance‐based/risk-based seismic design, providing guidance for achieving a cost-effective seismic design.

While numerous books have been written on earthquakes, earthquake resistance design, and seismic analysis and design of structures, none have been tailored for advanced students and practitioners, and those who would like to have most of the important aspects of seismic analysis in one place. With this book, readers will gain proficiencies in the following: fundamentals of seismology that all structural engineers must know; various forms of seismic inputs; different types of seismic analysis like, time and frequency domain analyses, spectral analysis of structures for random ground motion, response spectrum method of analysis; equivalent lateral load analysis as given in earthquake codes; inelastic response analysis and the concept of ductility; ground response analysis and seismic soil structure interaction; seismic reliability analysis of structures; and control of seismic response of structures. Provides comprehensive coverage, from seismology to seismic control Contains useful empirical equations often required in the seismic analysis of structures Outlines explicit steps for seismic analysis of MDOF systems with multi support excitations Works through solved problems to illustrate different concepts Makes use of MATLAB, SAP2000 and ABAQUAS in solving example problems of the book Provides numerous exercise problems to aid understanding of the subject As one of the first books to present such a comprehensive treatment of the topic, Seismic Analysis of Structures is ideal for postgraduates and researchers in Earthquake Engineering, Structural Dynamics, and Geotechnical Earthquake Engineering. Developed for classroom use, the book can also be used for advanced undergraduate students planning for a career or further study in the subject area. The book will also better equip structural engineering consultants and practicing engineers in the use of standard software for seismic analysis of buildings, bridges, dams, and towers. Lecture materials for instructors available at www.wiley.com/go/dattaseismic

This book aims to provide practical guidance on the application of FEA to the seismic analysis of structures and equipment, and to inform the reader generally about seismic analysis. The intended audience is the practicing engineer (and to a lesser degree engineering managers). It is assumed that the reader has some understanding and experience of seismic engineering and FEA. Examples of actual applications of FEA to safety critical structures and plant are used to illustrate some of the techniques and guidelines given within this document. There is much literature on the subject of FEA, including other NAFEMS publications, and there is an abundance of literature on the subject of seismic engineering. In particular, the reader is referred to ASCE 4-98 [Ref 1], and its successor document ASCE/SEI 43-05 [Ref 2]. Although geared to seismic analysis of safety related nuclear structures, this publication offers good practical guidance that is generally applicable to seismic analysis.

This book focuses on the seismic design of Structures, Piping Systems and Components (SSC). It explains the basic mechanisms of earthquakes, generation of design basis ground motion, and fundamentals of structural dynamics; further, it delves into geotechnical aspects related to the earthquake design, analysis of multi degree-of-freedom systems, and seismic design of RC structures and steel structures. The book discusses the design of components and piping systems located at the ground level as well as at different floor levels of the structure. It also covers anchorage design of component and piping system, and provides an introduction to retrofitting, seismic response control including seismic base isolation, and testing of SSCs. The book is written in an easy-to-understand way, with review questions, case studies and detailed examples on each topic. This educational approach makes the book useful in both classrooms and professional training courses for students, researchers, and professionals alike.

Authors Charney, Heausler, and Marshall provide clear, authoritative explanations of the seismic design provisions contained in Minimum Design Loads and Associated Criteria for Buildings and Other Structures, Standard ASCE/SEI 7-16.

Seismic Design of Industrial Facilities demands a deep knowledge on the seismic behaviour of the individual structural and non-structural components of the facility, possible interactions and last but not least the individual hazard potential of primary and secondary damages. From 26.-27. September 2013 the International Conference on Seismic Design of Industrial Facilities firstly addresses this broad field of work and research in one specialized conference. It brings together academics, researchers and professional engineers in order to discuss the challenges of seismic design for new and existing industrial facilities and to compile innovative current research. This volume contains 50 contributions to the SeDIF-Conference covering the following topics with respect to the specific conditions of plant design: · International building codes and guidelines on the seismic design of industrial facilities · Seismic design of non-structural components · Seismic design of silos and liquid-filled tanks - Soil-structure-interaction effects · Seismic safety evaluation, uncertainties and reliability analysis · Innovative seismic protection systems · Retrofitting The SeDIF-Conference is hosted by the Chair of Structural Statics and Dynamics of RWTH Aachen University, Germany, in cooperation with the Institute for Earthquake Engineering of the Dalian University of Technology, China.

"This report offers practical recommendations regarding the design and safety of new and existing petrochemical facilities during and following an earthquake"--

This handbook contains up-to-date existing structures, computer applications, and infonnation on planning, analysis, and design seismic design of wood structures. A new and very useful feature of this edition of earthquake-resistant building structures. Its intention is to provide engineers, architects, is the inclusion of a companion CD-ROM disc developers, and students of structural containing the complete digital version of the handbook itself and the following very engineering and architecture with authoritative, yet practical, design infonnation. It represents important publications: an attempt to bridge the persisting gap between l. UBC-IBC (1997-2000) Structural advances in the theories and concepts of Comparisons and Cross References, ICBO, earthquake-resistant design and their 2000. implementation in seismic design practice. 2. NEHRP Guidelines for the Seismic The distinguished panel of contributors is Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, composed of 22 experts from industry and universities, recognized for their knowledge and 1997. extensive practical experience in their fields. 3. NEHRP Commentary on the Guidelinesfor They have aimed to present clearly and the Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency concisely the basic principles and procedures pertinent to each subject and to illustrate with Management Agency, 1997. practical examples the application of these 4. NEHRP Recommended Provisions for principles and procedures in seismic design Seismic Regulations for New Buildings and practice. Where applicable, the provisions of Older Structures, Part 1 - Provisions, various seismic design standards such as mc FEMA-302, Federal Emergency 2000, UBC-97, FEMA-273/274 and ATC-40 Management Agency, 1997.