Progress in space safety lies in the acceptance of safety design and engineering as an integral part of the design and implementation process for new space systems. Safety must be seen as the principle design driver of utmost importance from the outset of the design process, which is only achieved through a culture change that moves all stakeholders toward front-end loaded safety concepts. This approach entails a common understanding and mastering of basic principles of safety design for space systems at all levels of the program organisation. Fully supported by the International Association for the Advancement of Space Safety (IAASS), written by the leading figures in the industry, with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle and the International Space Station, this book provides a comprehensive reference for aerospace engineers in industry. It addresses each of the key elements that impact on space systems safety, including: the space environment (natural and induced); human physiology in space; human rating factors; emergency capabilities; launch propellants and oxidizer systems; life support systems; battery and fuel cell safety; nuclear power generators (NPG) safety; habitat activities; fire protection; safety-critical software development; collision avoidance systems design; operations and on-orbit maintenance. - The only comprehensive space systems safety reference, its must-have status within space agencies and suppliers, technical and aerospace libraries is practically guaranteed - Written by the leading figures in the industry from NASA, ESA, JAXA, (et cetera), with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle, small and large satellite systems, and the International Space Station - Superb quality information for engineers, programme managers, suppliers and aerospace technologists; fully supported by the IAASS (International Association for the Advancement of Space Safety)

Endorsed by the International Association for the Advancement of Space Safety (IAASS) and drawing on the expertise of the world's leading experts in the field, Safety Design for Space Operations provides the practical how-to guidance and knowledge base needed to facilitate effective launch-site and operations safety in line with current regulations. With information on space operations safety design currently disparate and difficult to find in one place, this unique reference brings together essential material on: - Best design practices relating to space operations, such as the design of spaceport facilities. - Advanced analysis methods, such as those used to calculate launch and re-entry debris fall-out risk. - Implementation of safe operation procedures, such as on-orbit space traffic management. - Safety considerations relating to the general public and the environment in addition to personnel and asset protection. Taking in launch operations safety relating unmanned missions, such as the launch of probes and commercial satellites, as well as manned missions, Safety Design for Space Operations provides a comprehensive reference for engineers and technical managers within aerospace and high technology companies, space agencies, spaceport operators, satellite operators and consulting firms. - Fully endorsed by the International Association for the Advancement of Space Safety (IAASS), with contributions from leading experts at NASA, the European Space Agency (EASA) and the US Federal Aviation Administration (FAA), amongst others - Covers all aspects of space operations relating to safety of the general public, as well as the protection of valuable assets and the environment - Focuses on launch operations safety relating to manned and unmanned missions, such as the launch of probes and commercial satellites

The lack of widespread education in space safety engineering and management has profound effects on project team effectiveness in integrating safety during design. On one side, it slows down the professional development of junior safety engineers, while on the other side it creates a sectarian attitude that isolates safety engineers from the rest of the project team. To speed up professional development, bridge the gap within the team, and prevent hampered communication and missed feedback, the entire project team needs to acquire and develop a shared culture of space safety principles and techniques.The second edition of Safety Design for Space Systems continues to address these issues with substantial updates to chapters such as battery safety, life support systems, robotic systems safety, and fire safety. This book also features new chapters on crew survivability design and nuclear space systems safety. Finally, the discussion of human rating concepts, safety-by-design principles, and safety management practices have also been revised and improved. With contributions from leading experts worldwide, this second edition represents an essential educational resource and reference tool for engineers and managers working on space projects. - Provides basic multidisciplinary knowledge on space systems safety design - Addresses how space safety engineering and management can be implemented in practice - Includes new chapters on crew survivability design and nuclear space systems safety - Fully revised and updated to reflect the latest developments in the field

This chapter deals with some key topics of orbital safety. It starts with an overview of the issue of space traffic control and space situational awareness, and then proceeds to address conjunction analyses and collision avoidance maneuvers (CAM), including for the International Space Station. Another kind of collision risk discussed is the jettison of discarded hardware. The chapter then covers rendezvous and docking/berthing operations. Collision safety risks, their causes and consequences, and the measures for protection are discussed in detail. The chapter also covers the issues of space vehicles charging and contamination hazards, including the shock hazard for astronauts involved in extravehicular activities. Finally, the chapter presents end-of life mitigation measures and techniques for space debris removal, such as space tugs, drag devices and electrodynamic propulsion.

Space Safety and Human Performance provides a comprehensive reference for engineers and technical managers within aerospace and high technology companies, space agencies, operators, and consulting firms. The book draws upon the expertise of the world’s leading experts in the field and focuses primarily on humans in spaceflight, but also covers operators of control centers on the ground and behavior aspects of complex organizations, thus addressing the entire spectrum of space actors. During spaceflight, human performance can be deeply affected by physical, psychological and psychosocial stressors. Strict selection, intensive training and adequate operational rules are used to fight performance degradation and prepare individuals and teams to effectively manage systems failures and challenging emergencies. The book is endorsed by the International Association for the Advancement of Space Safety (IAASS). 2019 PROSE Awards - Winner: Category: Engineering and Technology: Association of American Publishers Provides information on critical aspects of human performance in space missions Addresses the issue of human performance, from physical and psychosocial stressors that can degrade performance, to selection and training principles and techniques to enhance performance Brings together essential material on: cognition and human error; advanced analysis methods such as human reliability analysis; environmental challenges and human performance in space missions; critical human factors and man/machine interfaces in space systems design; crew selection and training; and organizational behavior and safety culture Includes an endorsement by the International Association for the Advancement of Space Safety (IAASS)

The definition of all space systems starts with the establishment of its fundamental parameters: requirements to be fulfilled, overall system and satellite design, analysis and design of the critical elements, developmental approach, cost, and schedule. There are only a few texts covering early design of space systems and none of them has been specifically dedicated to it. Furthermore all existing space engineering books concentrate on analysis. None of them deal with space system synthesis – with the interrelations between all the elements of the space system. Introduction to Space Systems concentrates on understanding the interaction between all the forces, both technical and non-technical, which influence the definition of a space system. This book refers to the entire system: space and ground segments, mission objectives as well as to cost, risk, and mission success probabilities. Introduction to Space Systems is divided into two parts. The first part analyzes the process of space system design in an abstract way. The second part of the book focuses on concrete aspects of the space system design process. It concentrates on interactions between design decisions and uses past design examples to illustrate these interactions. The idea is for the reader to acquire a good insight in what is a good design by analyzing these past designs.

Presenting a fundamental definition of resilience, the book examines the concept of resilience as it relates to space system design. The book establishes the required definitions, relates its place to existing state-of-the-art systems engineering practices, and explains the process and mathematical tools used to achieve a resilient design. It discusses a variety of potential threats and their impact upon a space system. By providing multiple, real-world examples to illustrate the application of the design methodology, the book covers the necessary techniques and tools, while guiding the reader through the entirety of the process. The book begins with space systems basics to ensure the reader is versed in the functions and components of the system prior to diving into the details of resilience. However, the text does not assume that the reader has an extensive background in the subject matter of resilience. This book is aimed at engineers and architects in the areas of aerospace, space systems, and space communications.

The safety of any space system requires a deliberate and interdisciplinary integration of the flight hardware design with the design of its operations throughout the entire lifecycle of the system. This chapter introduces the subsequent chapters that more thoroughly address safety issues associated with the operations of space vehicles, from the design of the infrastructure on ground, through launch, on-orbit, and re-entry operations. This chapter begins with a discussion of safety and risk management at the conceptual level, including several fundamental goals and definitions. The balance of the chapter describes several seminal events and lays the foundation for a graduate level education in space operations safety.

System safety is the application of engineering and management principles, criteria, and techniques to optimize safety within the constraints of operational effectiveness, time, and cost throughout all phases of the system life cycle. System safety is to safety as systems engineering is to engineering. When performing appropriate analysis, the evaluation is performed holistically by tying into systems engineering practices and ensuring that system safety has an integrated system-level perspective.The NASA System Safety Handbook presents the overall framework for System Safety and provides the general concepts needed to implement the framework. The treatment addresses activities throughout the system life cycle to assure that the system meets safety performance requirements and is as safe as reasonably practicable.This handbook is intended for project management and engineering teams and for those with review and oversight responsibilities. It can be used both in a forward-thinking mode to promote the development of safe systems, and in a retrospective mode to determine whether desired safety objectives have been achieved.The topics covered in this volume include general approaches for formulating a hierarchy of safety objectives, generating a corresponding hierarchical set of safety claims, characterizing the system safety activities needed to provide supporting evidence, and presenting a risk-informed safety case that validates the claims. Volume 2, to be completed in 2012, will provide specific guidance on the conduct of the major system safety activities and the development of the evidence.

A one-stop reference guide to design for safety principles and applications Design for Safety (DfSa) provides design engineers and engineering managers with a range of tools and techniques for incorporating safety into the design process for complex systems. It explains how to design for maximum safe conditions and minimum risk of accidents. The book covers safety design practices, which will result in improved safety, fewer accidents, and substantial savings in life cycle costs for producers and users. Readers who apply DfSa principles can expect to have a dramatic improvement in the ability to compete in global markets. They will also find a wealth of design practices not covered in typical engineering books—allowing them to think outside the box when developing safety requirements. Design Safety is already a high demand field due to its importance to system design and will be even more vital for engineers in multiple design disciplines as more systems become increasingly complex and liabilities increase. Therefore, risk mitigation methods to design systems with safety features are becoming more important. Designing systems for safety has been a high priority for many safety-critical systems—especially in the aerospace and military industries. However, with the expansion of technological innovations into other market places, industries that had not previously considered safety design requirements are now using the technology in applications. Design for Safety: Covers trending topics and the latest technologies Provides ten paradigms for managing and designing systems for safety and uses them as guiding themes throughout the book Logically defines the parameters and concepts, sets the safety program and requirements, covers basic methodologies, investigates lessons from history, and addresses specialty topics within the topic of Design for Safety (DfSa) Supplements other books in the series on Quality and Reliability Engineering Design for Safety is an ideal book for new and experienced engineers and managers who are involved with design, testing, and maintenance of safety critical applications. It is also helpful for advanced undergraduate and postgraduate students in engineering. Design for Safety is the second in a series of “Design for” books. Design for Reliability was the first in the series with more planned for the future.