Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model

Rock Engineering and Rock Mechanics: Structures in and on Rock Masses covers the most important topics and state-of-the-art in the area of rock mechanics, with an emphasis on structures in and on rock masses. The 255 contributions (including 6 keynote lectures) from the 2014 ISRM European Rock Mechanics Symposium (EUROCK 2014, Vigo, Spain, 27-29 Ma

Engineers wishing to build structures on or in rock use the discipline known as rock mechanics. This discipline emerged as a subject in its own right about thirty five years ago, and has developed rapidly ever since. However, rock mechanics is still based to a large extent on analytical techniques that were originally formulated for the mechanical design of structures made from man made materials. The single most important distinction between man-made materials and the natural material rock is that rock contains fractures, of many kinds on many scales; and because the fractures - of whatever kin- represent breaks in the mechanical continuum, they are collectively termed 'discontinuities' . An understanding of the mechanical influence of these discontinuities is essential to all rock engineers. Most of the world is made of rock, and most of the rock near the surface is fractured. The fractures dominate the rock mass geometry, deformation modulus, strength, failure behaviour, permeability, and even the local magnitudes and directions of the in situ stress field. Clearly, an understanding of the presence and mechanics of the discontinuities, both singly and in the rock mass context, is therefore of paramount importance to civil, mining and petroleum engineers. Bearing this in mind, it is surprising that until now there has been no book dedicated specifically to the subject of discontinuity analysis in rock engineering.

Forty one years ago, the International Society for Rock Mechanics (ISRM) held its 1st International Congress in Lisbon, Portugal. In July 2007, the 11th ISRM Congress returned to Lisbon, where the Portuguese Geotechnical Society (SPG), the Portuguese National Group of the ISRM, hosted the meeting. The Second Half Century of Rock Mechanics comprises

This collection of papers on research into and management of underground structures in salt formations represents the state-of-the-art on applications of salt mechanics in mines and storage caverns for gas/hydrocarbon, radioactive waste and toxic waste disposal. The contributions cover laboratory experiments, constitutive numerical modeling and field investigations, and deal with creep, damage, thermo-hydro-mechanical and chemical-coupled effects, lessons learnt from real sites and structures and in-situ monitoring. The book is organized into eight topics: • Laboratory investigations and constitutive modeling • Coupled processes and hydro-chemical effects (THMC) • Field measurements and back-analyses • Numerical modeling • Dry mining, post-mining and backfilling • Liquid hydrocarbon storage and brine-production caverns • Gaseous hydrocarbon storage and compressed air energy storage • Hazardous and radioactive waste disposal Mechanical Behavior of Salt VII will appeal to academics, engineers and professionals involved in salt mechanics.

This publication includes 82 technical papers presented at Rocscience International Conference (RIC) 2021, held online on April 20 and 21, 2021. Rocscience created this event to bring geotechnical academics, researchers and practitioners together to exchange ideas as part of celebrating 25 years of the company’s existence. The papers in these proceedings were from keynotes, panel discussions and papers, selected after careful review of over 100 technical submissions delivered at RIC 2021. The technical papers were grouped into sessions based on their subject areas. The conference aimed to stimulate discussions that could help the industry work towards overcoming geotechnical engineering limitations today. It also sought to foster creative thinking that will advance the current states of the art and practice. The keynote addresses, panel discussions and technical presentations tried to examine geotechnical problems and situations from fresh perspectives. RIC 2021 hopes that the proceedings will continue to enrich our thinking and contribute to achieving a critical mass of change in our practices and approaches. We look forward to significant improvements in our industry.

Geomechanics and Geodynamics of Rock Masses contains contributions presented at EUROCK 2018, the 2018 International Symposium of the International Society for Rock Mechanics (ISRM 2018, Saint Petersburg, Russia, 22-26 May 2018). Dedicated to recent advances and achievements in the fields of geomechanics and geotechnology, the main topics of the book include: - Physical and mechanical properties of fractured rock (laboratory testing and rock properties, field measurements and site investigations) - Geophysics in rock mechanics - Rock mass strength and failure - Nonlinear problems in rock mechanics - Effect of joint water on the behavior of rock foundation - Numerical modeling and back analysis - Mineral resources development: methods and rock mechanics problems - Rock mechanics and underground construction in mining, hydropower industry and civil engineering - Rock mechanics in petroleum engineering - Geodynamics and monitoring of rock mass behavior - Risks and hazards - Geomechanics of technogenic deposits Geomechanics and Geodynamics of Rock Masses will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2018, organized by the Saint Petersburg Mining University, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.

This book is Volume 1 of the EUROCK 2018 proceedings. Geomechanics and Geodynamics of Rock Masses contains contributions presented at EUROCK 2018, the 2018 International Symposium of the International Society for Rock Mechanics (ISRM 2018, Saint Petersburg, Russia, 22-26 May 2018). Dedicated to recent advances and achievements in the fields of geomechanics and geotechnology, the main topics of the book include: - Physical and mechanical properties of fractured rock (laboratory testing and rock properties, field measurements and site investigations) - Geophysics in rock mechanics - Rock mass strength and failure - Nonlinear problems in rock mechanics - Effect of joint water on the behavior of rock foundation - Numerical modeling and back analysis - Mineral resources development: methods and rock mechanics problems - Rock mechanics and underground construction in mining, hydropower industry and civil engineering - Rock mechanics in petroleum engineering - Geodynamics and monitoring of rock mass behavior - Risks and hazards - Geomechanics of technogenic deposits Geomechanics and Geodynamics of Rock Masses will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2018, organized by the Saint Petersburg Mining University, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.

Covering the entire scope of rock mechanics and rock engineering, with an emphasis on the critical role of both disciplines in sustainable development and environmental preservation, Harmonising Rock Mechanics and the Environment will appeal to professionals, engineers and academics in rock mechanics, rock engineering, tunnelling, mining, earthquake engineering, rock dynamics and geotechnical engineering.

ADVANCES IN ENERGY STORAGE An accessible reference describing the newest advancements in energy storage technologies Advances in Energy Storage: Latest Developments from R&D to the Market is a comprehensive exploration of a wide range of energy storage technologies that use the fundamental energy conversion method. The distinguished contributors discuss the foundational principles, common materials, construction, device operation, and system level performance of the technology, as well as real-world applications. The book also includes examinations of the industry standards that apply to energy storage technologies and the commercial status of various kinds of energy storage. The book has been written by accomplished leaders in the field and address electrochemical, chemical, thermal, mechanical, and superconducting magnetic energy storage. They offer insightful treatments of relevant policy instruments and posit likely future advancements that will support and stimulate energy storage. Advances in Energy Storage also includes: A thorough introduction to electrochemical, electrical, and super magnetic energy storage, including foundational electrochemistry concepts used in modern power sources A comprehensive exploration of mechanical energy storage and pumped hydro energy storage Practical discussions of compressed air energy storage and flywheels, including the geology, history, and development of air energy storage In-depth examinations of thermal energy storage, including new material developments for latent and thermochemical heat storage Perfect for practicing electrical engineers, mechanical engineers, and materials scientists, Advances in Energy Storage: Latest Developments from R&D to the Market is also an indispensable reference for researchers and graduate students in these fields.