An autonomous sailboat robot is a boat that only uses the wind on its sail as the propelling force, without remote control or human assistance to achieve its mission. Robotic sailing offers the potential of long range and long term autonomous wind propelled, solar or wave-powered carbon neutral devices. Robotic sailing devices could contribute to monitoring of environmental, ecological, meteorological, hydrographic and oceanographic data. These devices can also be used in traffic monitoring, border surveillance, security, assistance and rescue. The dependency on changing winds and sea conditions presents a considerable challenge for short and long term route and stability planning, collision avoidance and boat control. Building a robust and seaworthy sailing robot presents a truly complex and multi-disciplinary challenge for boat designers, naval architects, systems/electrical engineers and computer scientists. Over the last decade, several events such as Sailbot, World Robotic Sailing Championship and the International Robotic Sailing Conference (WRSC/IRSC) and Microtransat have sparked an explosion in the number of groups working on autonomous sailing robots. Many of the challenges in building truly autonomous sailing robots still remain unsolved. These proceedings present the work of researchers on current and future challenges in autonomous sailboat development, presented at the WRSC/IRSC 2014 in Galway, Ireland, 8th – 12th September 2014.

This book contains selected papers that address a variety of topics related to the design, development and operation of unmanned and fully autonomous sailing boats. These papers were presented in the 9th International Robotic Sailing Conference, in association with the 9th World Robotic Sailing Championship that took place in Viana do Castelo, Portugal from the 5th to 10th of September 2016. The book is divided in three parts, each focusing on key aspects of robotic sailing. The first part addresses the design, construction and validation of autonomous sailboat platforms, including their rigs, appendages and control mechanisms. The second part is devoted to the development of sensors and algorithms to enhance the performance of robotic sailing boats, in terms of their speed, course control and manoeuvring ability. Finally, the papers in the last part are dedicated to the improvement of behaviours required for the accomplishment of complex autonomous missions. Robotic sailing is a relatively new multidisciplinary area of research, with a recognized great potential for persistent ocean observation. Using the wind for boat propulsion is something mankind has been doing for centuries. Automating and optimizing the sailing process in the harsh marine environment is an ever present challenge which is now promising to bear fruit.

This book presents the cutting edge developments within a broad field related to robotic sailing. The contributions were presented during the 8th International Robotic Sailing Conference, which has taken place as a part of the 2015 World Robotic Sailing Championships in Mariehamn, Åland (Finland), August 31st – September 4th 2015. Since more than a decade, a series of competitions such as the World Robotic Sailing Championship have stimulated a variety of groups to work on research and development around autonomous sailing robots, which involves boat designers, naval architects, electrical engineers and computer scientists. While many of the challenges in building a truly autonomous sailboat are still unsolved, the books presents the state of the art of research and development within platform optimization, route and stability planning, collision avoidance, power management and boat control.

Robotic Sailing 2017. This book contains the peer-reviewed papers presented at the 10th International Robotic Sailing Conference which was organized in conjunction with the 10th World Robotic Sailing Championship held in Horten, Norway the 4th-9th of September 2017. The seven papers cover topics of interest for autonomous robotic sailing which represents some of the most challenging research and development areas. The book is divided into two parts. The first part contains papers which focus on the design of sails and software for the assessment and predication of sailboat performance as well as software platforms and middleware for sailboat competition and research. The second part includes algorithms and strategies for navigation and collision avoidance on local, mid- and long range. The differences in approach in the included papers show that robotic sailing is still an emerging cross-disciplinary science. The multitude of suggestions to the specific problems of prediction and simulation of sailboats as well as the challenges of route planning, anti-grounding and collision avoidance are good indicators of science in its infancy. Hence, we may expect the future to hold great advances for robotic sailing.

This book gathers a selection of papers presented at ROBOT 2019 – the Fourth Iberian Robotics Conference, held in Porto, Portugal, on November 20th–22nd, 2019. ROBOT 2019 is part of a series of conferences jointly organized by the SPR – Sociedade Portuguesa de Robótica (Portuguese Society for Robotics) and SEIDROB – Sociedad Española para la Investigación y Desarrollo en Robótica (Spanish Society for Research and Development in Robotics). ROBOT 2019 built upon several previous successful events, including three biannual workshops and the three previous installments of the Iberian Robotics Conference, and chiefly focused on presenting the latest findings and applications in robotics from the Iberian Peninsula, although the event was also open to research and researchers from other countries. The event featured five plenary talks on state-of-the-art topics and 16 special sessions, plus a main/general robotics track. In total, after a stringent review process, 112 high-quality papers written by authors from 24 countries were selected for publication.

An autonomous sailboat robot is a boat that only uses the wind on its sail as propelling force, without remote control or human assistance to achieve its mission. This involves autonomy in energy (using batteries, solar panels, turbines...), sensor data processing (compass, GPS, wind sensor...), actuators control (rudder and sail angle control...) and decision making (embedded computer with adequate algorithms). Although robotic sailing is a relatively new field of research, several applications exist for this type of robots: oceanographic and hydrographic research, maritime environment monitoring, meteorology, harbor safety, assistance and rescue in dangerous areas... Over the last decade, several events such as the Microtransat challenge, the WRSC/IRSC and SailBot have been set up to stimulate research and development around robotic sailing. These proceedings cover the current and future academic and technology challenges raised by the development of autonomous sailboat robots presented at the WRSC/IRSC (World Robotic Sailing Championship/International Robotic Sailing Conference) 2013, in Brest, France, 2-6 September 2013.

While sailing has a long tradition, both as a means of transportation and as a sport, robotic sailing is a fairly new area of research. One of its unique characteristics is the use of wind for propulsion. On the one hand, this allows for long range and long term autonomy. On the other hand, the dependency on changing winds presents a serious challenge for short and long term planning, collision avoidance, and boat control. Moreover, building a robust and seaworthy sailing robot is no simple task, leading to a truly interdisciplinary engineering problem. These proceedings summarize the state of the art as presented at the International Robotic Sailing Conference 2011. Following an overview of the history of autonomous sailing a number of recent boat designs is presented, ranging from small one-design boats to vessels built to cross the Atlantic Ocean. Subsequently, various aspects of system design and validation are discussed, further highlighting the interdisciplinary nature of the field. Finally, methods for collision avoidance, localization and route planning are covered.

Engineering education aims to prepare engineering undergraduates for their future professional journey where they will be called on to solve challenges affecting individuals, companies, and society. The European Project Semester (EPS) exposes students to project- and challenge-based learning, paying special attention to international multidisciplinary teamwork, sustainable design, innovative thinking, and project management in order to develop a set of desired professional skills. The Handbook of Research on Improving Engineering Education With the European Project Semester shares the best practices in engineering education through close examination of the EPS. It describes the adopted learning framework, analyzes how it contributes to the development of skills, reports on the types of challenges proposed to teams, and delivers a set of team-project cases from the network of providers. Covering topics such as engineering ethics, project management, and sustainable behavior, this book is essential to students in engineering, engineers, engineering educators, educational researchers, academic administration and faculty, and academicians.

This book constitutes the refereed proceedings of the 8th InternationalConference on Computational Logistics, ICCL 2017, held in Southampton,UK, in October 2017.The 38 papers presented in this volume were carefully reviewed and selected for inclusion in the book. They are organized in topical sections entitled: vehicle routing and scheduling; maritime logistics;synchromodal transportation; and transportation, logistics and supply chain planning.