Ebook only (available soon) The report describes the principles of measurement of respiration rate, the transformation of measurement data into other types of information, and the application of the obtained information in process control strategies. Some fundamental concepts on biological respiration and process control are provided to assist the reader with understanding the principles. A structured overview comprises some eighty control strategies in which respirometry plays a role. To enable the reader to consult the information sources, an extensive literature list of over 500 references in included and classified into six themes. Contents Fundamentals of Respiration Measuring Principles Measured and Deduced Variables Elementary Control Concepts Respirometry in Control of the Activated Sludge Process Summary and Perspectives. Scientific and Technical Report No.7 Also Available Respirometry in Control of the Activated Sludge Process: Benchmarking Control Strategies

Mathematical modeling is a useful tool for the design, analysis and control of wastewater treatment systems. The activated sludge process is one of the most common processes used in wastewater treatment, and therefore is a particularly important candidate for the application of mathematical models. In the 1980s, a task group organized by the International Association on Water Quality (IAWQ) developed a conceptual model of the activated sludge process, which has become an industry-wide standard for the development of computer-based activated sludge models. A recent version of the IAWQ model incorporates 19 components, 17 processes, and numerous rate and stoichiometric coefficients. It is difficult and costly to quantify all of the necessary coefficients for any given application of the model; consequently, it is important to identify the most critical wastewater and biomass components and the relevant coefficients to be quantified for the most common uses of the model. It is also important to provide guidance to potential model users on the use of default and/or estimated values for the remaining parameters.

FROM THE PREFACE Dynamic modeling, computer simulation, and modern control systems are valuable tools for use in both the design and operation of dynamic systems. From the "tools" point of view, this book is designed to show practicing engineers how to develop models capable of describing dynamic behavior and how to "solve" these models using computer simulation. The basic principles of process control are also presented so that the effects of different control systems on dynamic behavior can be established by computer simulation.

The Activated Sludge (AS) Process is old technology but is still widely adopted worldwide for its convenience and simplicity: an impressive number (many hundred of thousands) of this kind of system are in operation. Occasionally, problems such as bulking and foaming occur, causing regulation violations and large investment is often required immediately to control them. For this reason, an intense research effort has been made during the last few decades to face these problems, and this report details the work undertaken by the IWA Specialist Group on Activated Sludge Population Dynamics. This Scientific and Technical Report describes the main reasons fslyuor the growth of the different filamentous microorganisms in activated sludge, and the biological molecular tools available today for the identification of the main biomass components. The wide range of experiences around the world is documented and the methods to avoid the proliferation of these organisms are presented and critically reviewed. Activated Sludge Separation Problems consists of seven chapters, presenting up-to-date technical and scientific aspects of these processes. Scientific and Technical Report No. 16

At the dawn of the 21st century, biotechnology is emerging as a key enabling technology for sustainable environmental protection and stewardship. Biotechnology for the Environment: Wastewater Treatment and Modeling, Waste Gas Handling illustrates the current technological applications of microorganisms in wastewater treatment and in the control of waste gas emissions. In the first section of the book special emphasis is placed on the use of rigorous mathematical and conceptual models for an in-depth understanding of the complex biology and engineering aspects underlying the operation of modern wastewater treatment installations. The second part addresses waste gas biofiltration, an expanding biotechnological application of microbial metabolism for air quality assurance through processes ranging from the abatement of hazardous volatile pollutants to the elimination of nuisance odors. It will be a valuable reference source for environmental scientists, engineers and decision makers involved in the development, evaluation or implementation of biological treatment systems. For more information on Strategy and Fundamentals, see Focus on Biotechnology, Volume 3A, and for more information on Soil Remediation, see Focus on Biotechnology, Volume 3B.

This book provides a thorough overview of respirometry and its scientific and engineering basis. The book describes the fundamentals of biological waste treatment, development of predictive models for system design and operation, and how respirometry fits in with these operations. It also presents case studies, which give you concrete examples of the application of respirometry. This book will help activated sludge process control designers, operators, and managers of biological wastewater treatment facilitieslearn how to improve methods for the analysis of biological wastewater systems, enhance design and treatability projects, optimize and troubleshoot plant operations, and accurately predict the impact of new loads or streams on biological wastewater facilities.

In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.

Activated sludge is the most widely used biological wastewater treatment process globally to date, although its high energy demand makes it a major contributor of greenhouse gas emissions. Over recent decades it has been constantly modified and retrofitted to treat ever higher loads or improve effluent standards which have often resulted in even greater carbon emissions. Conventional activated sludge treatment is at a crossroads where new sustainable solutions are required if we are to protect the quality of our rivers and meet net-zero carbon targets.The book details current operation and design with special emphasis on the biological aspects of the process. From the microbial kinetics to the fascinating process of floc formation and development, the book explores the development of our understanding of the process looking at new sustainable designs, including biological nutrient removal and new aeration systems. Sludge separation problems and control options are explained, with a trouble-shooting guide to non-bulking problems. Environmental issues including noise, odor, aerosols, micro-plastics and nanoparticles are all reviewed, as is pathogen removal and the problem of antibiotic resistant genes and bacteria. The development of membrane bioreactors has increased process reliability and effluent quality, while integrated fixed-film activated sludge processes are more efficient and compact. The book concludes by exploring how activated sludge can become more sustainable, for example, by carbon harvesting and byproduct recovery.This interdisciplinary book is essential reading for both engineers and scientists whether training at university or practitioners and consultants in the wastewater industry.Related Link(s)

This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9