Discussing the modern tools that support designs based on product reliability, this text focuses on the classical techniques of reliability analysis as well as response surface modelling and physics-based reliability prediction methods. It makes use of the available personal computer tools that permit a host of application examples, and contains an IBM-compatible disk that illustrates immediately applicable software that facilitates reliability modelling in mechanical design.

This book provides readers with an understanding of the fundamentals and applications of structural reliability, stochastic finite element method, reliability analysis via stochastic expansion, and optimization under uncertainty. It examines the use of stochastic expansions, including polynomial chaos expansion and Karhunen-Loeve expansion for the reliability analysis of practical engineering problems.

Researchers in the engineering industry and academia are making important advances on reliability-based design and modeling of uncertainty when data is limited. Non deterministic approaches have enabled industries to save billions by reducing design and warranty costs and by improving quality. Considering the lack of comprehensive and defini

A component will not be reliable unless it is designed with required reliability. Reliability-Based Mechanical Design uses the reliability to link all design parameters of a component together to form a limit state function for mechanical design. This design methodology uses the reliability to replace the factor of safety as a measure of the safe status of a component. The goal of this methodology is to design a mechanical component with required reliability and at the same time, quantitatively indicates the failure percentage of the component. Reliability-Based Mechanical Design consists of two separate books: Volume 1: Component under Static Load, and Volume 2: Component under Cyclic Load and Dimension Design with Required Reliability. This book is Reliability-Based Mechanical Design, Volume 1: Component under Static Load. It begins with a brief discussion on the engineering design process and the fundamental reliability mathematics. Then, the book presents several computational methods for calculating the reliability of a component under loads when its limit state function is established. Finally, the book presents how to establish the limit state functions of a component under static load and furthermore how to calculate the reliability of typical components under simple typical static load and combined static loads. Now, we do know the reliability of a component under static load and can quantitively specify the failure percentage of a component under static load. The book presents many examples for each topic and provides a wide selection of exercise problems at the end of each chapter. This book is written as a textbook for junior mechanical engineering students after they study the course of Mechanics of Materials. This book is also a good reference book for design engineers and presents design check methods in such sufficient detail that those methods are readily used in the design check of a component under static load.

Today's marketplace demands product reliability. At the same time, it places ever-increasing demands on products that push the limits of their performance and their functional life, and it does so with the expectation of lower per-unit product costs. To meet these demands, product design now requires a focused, streamlined, concurrent engineering process that will produce a product at the lowest possible cost in the least amount of time. Design for Reliability provides a systematic approach to the design process that is sharply focused on reliability and firmly based on the physics of failure. It imparts an understanding of how, why, and when to use the wide variety of reliability engineering tools available and offers fundamental insight into the total design cycle. Applicable from the idea phase of the product development cycle through product obsolescence, Design for Reliability (DfR) concepts integrated with reliability verification and analytical physics form a coherent stage gate/phase design process that helps ensure that a product will meet customers' reliability objectives. Whether you are a high-volume manufacturer of consumer items or a low volume producer of military commodities, your goal is the same: to bring a product to market using a process focused on designing out or mitigating potential failure modes prior to production release. Readers of Design for Reliability will learn to meet that goal and move beyond solidifying a basic offering to the marketplace to creating a true competitive advantage.

S.S. Rao presents the principles of reliability-based engineering and design in a simple and straight-forward approach. He addresses the design of mechanical components and systems; Monte Carlo simulation; reliability-based optimum design; strength-based reliability and interface theory; reliability testing; time-dependent reliability of components and systems; failure modes, event tree and fault tree analysis; quality control and reliability; modeling of geometry; weakest-link and fail-safe systems; maintainability and availability; extremal distributions; random variables and probability distributions; functions of random variables; and basic probability theory. With 254 illustrations and an index.

This book introduces and explains the parametric accelerated life testing (ALT) methodology as a new reliability methodology based on statistics, to help avoid recalls of products in the marketplace. The book includes problems and case studies to help with reader comprehension. It provides an introduction to reliability design of the mechanical system as an alternative to Taguchi’s experimental methodology and enables engineers to correct faulty designs and determine if the targeted product reliability is achieved. Additionally, it presents a robust design methodology of mechanical products to withstand a variety of loads. This book is intended for engineers of many fields, including industrial engineers, mechanical engineers, and systems engineers.

A component will not be reliable unless it is designed with required reliability. Reliability-Based Mechanical Design uses the reliability to link all design parameters of a component together to form a limit state function for mechanical design. This design methodology uses the reliability to replace the factor of safety as a measure of the safe status of a component. The goal of this methodology is to design a mechanical component with required reliability and at the same time, quantitatively indicates the failure percentage of the component. Reliability-Based Mechanical Design consists of two separate books: Volume 1: Component under Static Load, and Volume 2: Component under Cyclic Load and Dimension Design with Required Reliability. This book is Reliability-Based Mechanical Design, Volume 2: Component under Cyclic Load and Dimension Design with Required Reliability. It begins with a systematic description of a cyclic load. Then, the books use two probabilistic fatigue theories to establish the limit state function of a component under cyclic load, and further to present how to calculate the reliability of a component under a cyclic loading spectrum. Finally, the book presents how to conduct dimension design of typical components such as bar, pin, shaft, beam under static load, or cyclic loading spectrum with required reliability. Now, the designed component will be reliable because it has been designed with the required reliability. The book presents many examples for each topic and provides a wide selection of exercise problems at the end of each chapter. This book is written as a textbook for senior mechanical engineering students after they study the course Design of Machine Elements or a similar course. This book is also a good reference for design engineers and presents design methods in such sufficient detail that those methods are readily used in the design.

The revised edition of this book offers an expanded overview of the reliability design of mechanical systems and describes the reliability methodology, including a parametric accelerated life test (ALT) plan, a load analysis, a tailored series of parametric ALTs with action plans, and an evaluation of the final designs to ensure the design requirements are satisfied. It covers both the quantitative and qualitative approaches of the reliability design forming in the development process of mechanical products, with a focus on parametric ALT and illustrated via case studies. This new reliability methodology – parametric ALT should help mechanical and civil engineers to uncover design parameters improving product design and avoiding recalls. Updated chapters cover product recalls and assessment of their significance, modern definitions in reliability engineering, parametric accelerated life testing in mechanical systems, and extended case studies. For this revised edition, one new chapter has been introduced to reflect recent developments in analysis of fluid motion and mechanical vibration. Other chapters are expanded and updated to improve the explanation of topics including structures and load analysis, failure mechanics, design and reliability testing, and mechanical system failure. The broad scope gives the reader an overview of the state-of-the-art in the reliability design of mechanical systems and an indication of future directions and applications. It will serve as a solid introduction to the field for advanced students, and a valuable reference for those working in the development of mechanical systems and related areas.

An Integrated Approach to Product Development Reliability Engineering presents an integrated approach to the design, engineering, and management of reliability activities throughout the life cycle of a product, including concept, research and development, design, manufacturing, assembly, sales, and service. Containing illustrative guides that include worked problems, numerical examples, homework problems, a solutions manual, and class-tested materials, it demonstrates to product development and manufacturing professionals how to distribute key reliability practices throughout an organization. The authors explain how to integrate reliability methods and techniques in the Six Sigma process and Design for Six Sigma (DFSS). They also discuss relationships between warranty and reliability, as well as legal and liability issues. Other topics covered include: Reliability engineering in the 21st Century Probability life distributions for reliability analysis Process control and process capability Failure modes, mechanisms, and effects analysis Health monitoring and prognostics Reliability tests and reliability estimation Reliability Engineering provides a comprehensive list of references on the topics covered in each chapter. It is an invaluable resource for those interested in gaining fundamental knowledge of the practical aspects of reliability in design, manufacturing, and testing. In addition, it is useful for implementation and management of reliability programs.