"This book discusses the different type of industrial, agricultural and/or natural wastes and how some have been already utilized in the concrete industry while many others demonstrate promise for future use"--

The civil engineering sector accounts for a significant percentage of global material and energy consumption and is a major contributor of waste material. The ability to recycle and reuse concrete and demolition waste is critical to reducing environmental impacts in meeting national, regional and global environmental targets. Handbook of recycled concrete and demolition waste summarises key recent research in achieving these goals.Part one considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants and the economics of managing construction and demolition waste. Part two reviews key steps in handling construction and demolition waste. It begins with a comparison between conventional demolition and construction techniques before going on to discuss the preparation, refinement and quality control of concrete aggregates produced from waste. It concludes by assessing the mechanical properties, strength and durability of concrete made using recycled aggregates. Part three includes examples of the use of recycled aggregates in applications such as roads, pavements, high-performance concrete and alkali-activated or geopolymer cements. Finally, the book discusses environmental and safety issues such as the removal of gypsum, asbestos and alkali-silica reaction (ASR) concrete, as well as life-cycle analysis of concrete with recycled aggregates.Handbook of recycled concrete and demolition waste is a standard reference for all those involved in the civil engineering sector, as well as academic researchers in the field. - Summarises key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts and meet national, regional and global environmental targets - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste

The amount and variety of waste that humanity dumps in landfill sites is nothing short of a scandal, believes Rafat Siddique, of Deemed University in Patiala, India. Instead, we ought to be building new homes out of it! Siddique shows in this important book that many non-hazardous waste materials and by-products which are landfilled, can in fact be used in making concrete and similar construction materials.

Waste and By-Products in Cement-Based Materials: Innovative Sustainable Materials for a Circular Economy covers various recycled materials, by-products and wastes that are suitable for the manufacture of materials within the spectrum of so-called cement-based materials (CBM). Sections cover wastes for replacement of aggregates in CBM, focus on the application of wastes for the replacement of clinker and mineral additions in the manufacture of binders, discuss the optimization process surrounding the manufacture of recycled concrete and mortars, multi-recycling, advanced radiological studies, optimization of self-compacting concrete, rheology properties, corrosion prevention, and more. Final sections includes a review of real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others, as well as a proposal of new regulations to promote the use of waste in the manufacture of CBM. - Favors the institution of the circular economy in the construction industry by eliminating the barriers that currently prevent industrial waste from being valorized by its inclusion in CBM design - Features an in-depth exploration of the strengths and weaknesses of new raw materials and their application to CBMs - Features real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others - Presents current, state-of-the-art, and future-prospects for the use of industrial waste in CBMs

Concrete is the most used man-made material in the world since its invention. The widespread use of this material has led to continuous developments such as ultra-high strength concrete and self-compacting concrete. Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste focuses on the recent development which the use of various types of recycled waste materials as aggregate in the production of various types of concrete. By drawing together information and data from various fields and sources, Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste provides full coverage of this subject. Divided into two parts, a compilation of varied literature data related to the use of various types of industrial waste as aggregates in concrete is followed by a discussion of the use of construction and demolition waste as aggregate in concrete. The properties of the aggregates and their effect on various concrete properties are presented, and the quantitative procedure to estimate the properties of concrete containing construction and demolition waste as aggregates is explained. Current codes and practices developed in various countries to use construction and demolition waste as aggregates in concrete and issues related to the sustainability of cement and concrete production are also discussed. The comprehensive information presented in Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste will be helpful to graduate students, researchers and concrete technologists. The collected data will also be an essential reference for practicing engineers who face problems concerning the use of these materials in concrete production.

This book describes how, given the global challenge of a shortage of natural resources in the 21st century, the recycling of waste concrete is one of the most important means of implementing sustainable construction development strategies. Firstly, the book presents key findings on the micro- and meso-structure of recycled aggregate concrete (RAC), while the second part focuses on the mechanical properties of RAC: the strength, elastic modulus, Poisson’s ratio, stress-strain curve, etc. The third part of the book explores research on the durability of RAC: carbonization, chloride penetration, shrinkage and creep. It then presents key information on the mechanical behavior and seismic performance of RAC elements and structures: beams, columns, slabs, beam-column joints, and frames. Lastly, the book puts forward design guidelines for recycled aggregate concrete structures. Taken as a whole, the research results – based on a series of investigations the author has condu cted on the mechanical properties, durability and structural performance of recycled aggregate concrete (RAC) over the past 10 years – demonstrate that, with proper design and construction, it is safe and feasible to utilize RAC structures in civil engineering applications. The book will greatly benefit researchers, postgraduates, and engineers in civil engineering with an interest in this field.

Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. - Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste

Over two billion tonnes of waste are generated in the European Union every year, approximately half of which comes from the construction industry. Increasing pressure on landfill sites, accompanied by escalating prices and a growing awareness of environmental concerns has made the minimization of this waste and ites responsible disposal an absolute necessity. The Environment Protection Act 1990 placed a Duty of Care on every individual involved in the creation, storage, transportation or disposal of waste. This practical guide for everyone involved with the construction industry outlines how to manage waste from construction economically and in accordance with the legal requirements of the Duty of Care. It explains in detail all actions required of the responsible person and offers extremely practical advice on how to minimize the amount of waste produced, thus saving costs and reducing the environmental impact.

This new RILEM report contains state-of-the-art reviews on three topics: recycling of demolished concrete, recycling of masonry rubble and localized cutting by blasting of concrete. It has been compiled by an international RILEM Committee and draws on research and practical experience worldwide.

Due to the demand for new urban construction, its repair, and its maintenance, the concrete and construction enterprises continue to grow, as do their use of finite natural resources. The industry is now under pressure to seek ways to minimize the use of rapidly depleting natural resources. Effective utilization of various waste materials, often found in abundance, may be the key as they not only ward off deleterious environmental hazards, but they have also been known to produce wealth by adding value through ecology. Recycled Waste Materials in Concrete Construction: Emerging Research and Opportunities is a detailed scholarly resource that discusses different types of industrial, agricultural, and natural wastes that are either currently in use in the concrete industry or demonstrate potential for future use and how they can be used as additives or replacements for cement and other construction materials. Highlighting topics such as engineering properties, material durability, and raw materials, this books targets engineers, construction professionals, contractors, consulting firms, government officials, cement and waste material industries, policymakers, academicians, and researchers.