Past storms such as Hurricanes Andrew, Hugo, Charley, Katrina, and Rita, and recent events such as Hurricane Ike continue to show the vulnerability of our “built environment”. While good design and construction cannot totally eliminate risk, every storm has shown that sound design and construction can significantly reduce the risk to life and damage to property. With that in mind, the Federal Emergency Management Agency (FEMA) has developed this manual to help the community of homebuilders, contractors, and local engineering professionals in rebuilding homes destroyed by hurricanes, and designing and building safer and less vulnerable new homes. The intent of the manual is to provide homebuilders, contractors, and engineering professionals with a series of recommended foundation designs that will help create safer and stronger buildings in coastal areas. The designs are intended to help support rebuilding efforts after coastal areas have been damaged by floods, high winds, or other natural hazards. The foundations may differ somewhat from traditional construction techniques; however, they represent what are considered to be some of the better approaches to constructing strong and safe foundations in hazardous coastal areas. The objectives used to guide the development of this manual are: To provide residential foundation designs that will require minimal engineering oversight; To provide foundation designs that are flexible enough to accommodate many of the homes identified in A Pattern Book for Gulf Coast Neighborhoods prepared for the Mississippi Governor's Rebuilding Commission on Recovery, Rebuilding, and Renewal; To utilize "model" layouts so that many homes can be constructed without significant additional engineering efforts. The focus of this document is on the foundations of residential buildings. The assumption is that those who are designing and building new homes will be responsible for ensuring that the building itself is designed according to the latest building code (International Building Code®, International Residential Code®, and FEMA guidance) and any local requirements. The user of this manual is directed to other publications that also address disaster-resistant construction. Although the foundation designs are geared to the coastal environment subject to storm surge, waves, floating debris, and high winds, several are suitable for supporting homes on sites protected by levees and floodwalls or in riverine areas subjected to high-velocity flows. Design professionals can be contacted to ensure the foundation designs provided in this manual are suitable for specific sites. This edition of FEMA 550 introduces the Case H foundation, which is an open/deep foundation developed for use in coastal high hazard areas (V zones). It is also appropriate to use the Case H foundation in Coastal A and non-coastal A zones. Case H foundations incorporate elevated reinforced concrete beams that provide three important benefits. One, the elevated beams work in conjunction with the reinforced concrete columns and grade beams to produce a structural frame that is more efficient at resisting lateral loads than the grade beams and cantilevered columns used in other FEMA 550 open foundations. The increased efficiency allows foundations to be constructed with smaller columns that are less exposed to flood forces. The second benefit is that the elevated reinforced concrete beams provide a continuous foundation that can support many homes constructed to prescriptive designs from codes and standards such as the IRC, the American Forest and Paper Association's Wood Frame Construction Manual for One- and Two-Family Dwellings (WFCM), and the International Code Council's Standard for Residential Construction in High Wind Regions (ICC-600). The third benefit that Case H foundations provide is the ability to support relatively narrow homes. It is anticipated that Case H foundations can be used for several styles of modular homes.

FULL COLOR publication. The purpose of this design manual is to provide recommended foundation designs and guidance for rebuilding homes destroyed by hurricanes in coastal areas. In addition, the manual is intended to provide guidance in designing and building safer and less vulnerable homes to reduce the risk to life and property. The intent of the manual is to provide homebuilders, contractors, and engineering professionals with a series of recommended foundation designs that will help create safer and stronger buildings in coastal areas. The designs are intended to help support rebuilding efforts after coastal areas have been damaged by floods, high winds, or other natural hazards. The foundations may differ somewhat from traditional construction techniques; however, they represent what are considered to be some of the better approaches to constructing strong and safe foundations in hazardous coastal areas. The objectives used to guide the development of this manual are: To provide residential foundation designs that will require minimal engineering oversight; To provide foundation designs that are flexible enough to accommodate many of the homes identified in A Pattern Book for Gulf Coast Neighborhoods prepared for the Mississippi Governor's Rebuilding Commission on Recovery, Rebuilding, and Renewal; To utilize "model" layouts so that many homes can be constructed without significant additional engineering efforts. The focus of this document is on the foundations of residential buildings. The assumption is that those who are designing and building new homes will be responsible for ensuring that the building itself is designed according to the latest building code (International Building Code(r) [IBC(r)], International Residential Code(r) [IRC(r)], and FEMA guidance) and any local requi

This book systematizes the concepts of contemporary coastal zone management and suggests possible structural and non-structural management tools for decision-making processes. Some successful adaptation measures and case studies on oceanic processes and coastal protection are discussed. High-frequency communications in coastal and marine environments are also addressed.All chapters contribute relevant information and useful content to scientists and other readers interested or concerned about the lack of adequate management actions and the installation of appropriate protections or their ineffectiveness in containing coastal vulnerabilities and risks.

NOTE: NO FURTHER DISCOUNT FOR THIS PRINT PRODUCT -- OVERSTOCK SALE -- Signficantly reduced lsit price FEMA produced this series of 37 fact sheets to provide technical guidance and recommendations concerning the construction of coastal residential buildings. The fact sheets present information aimed at improving the performance of buildings subject to flood and wind forces in coastal environments. Photographs and drawings illustrate National Flood Insurance Program (NFIP) regulatory requirements, the proper siting of coastal buildings, and recommended design and construction practices for building components, including structural connections, the building envelope, and utilities. Many of the fact sheets also include lists of FEMA and other resources that provide more information about the topics discussed. Where appropriate, resources are accompanied by active web links. A list of the individual fact sheets that are contained inFEMA P-499, follows.Category 1 GeneralFact Sheet No. 1.1, Coastal Building Successes and FailuresFact Sheet No. 1.2, Summary of Coastal Construction Requirements and RecommendationsFact Sheet No. 1.3, Using a Flood Insurance Rate Map (FIRM)Fact Sheet No. 1.4, Lowest Floor ElevationFact Sheet No. 1.5, V-Zone Design and Construction CertificationFact Sheet No. 1.6, Designing for Flood Levels Above the BFEFact Sheet No. 1.7, Coastal Building MaterialsFact Sheet No. 1.8, Non-Traditional Building Materials and SystemsFact Sheet No. 1.9, Moisture Barrier Systems Category 2 Planning Fact Sheet No. 2.1, How Do Siting and Design Decisions Affect the Owner's Costs?Fact Sheet No. 2.2, Selecting a Lot and Siting the Building Category 3 Foundations Fact Sheet No. 3.1, Foundations in Coastal AreasFact Sheet No. 3.2, Pile InstallationFact Sheet No. 3.3, Wood-Pile-to-Beam ConnectionsFact Sheet No. 3.4, Reinforced Masonry Pier ConstructionFact Sheet No. 3.5, Foundation Walls Category 4 Load Paths Fact Sheet No. 4.1, Load PathsFact Sheet No. 4.2, Masonry DetailsFact Sheet No. 4.3, Use of Connectors and Brackets Category 5 Wall Systems Fact Sheet No. 5.1, HousewrapFact Sheet No. 5.2, Roof-to-Wall and Deck-to-Wall FlashingFact Sheet No. 5.3, Siding Installation in High-Wind RegionsFact Sheet No. 5.4, Attachment of Brick Veneer In High-Wind Regions Category 6 Openings Fact Sheet No. 6.1, Window and Door InstallationFact Sheet No. 6.2, Protection of Openings Shutters and Glazing Category 7 - Roofing Fact Sheet No. 7.1, Roof Sheathing InstallationFact Sheet No. 7.2, Roof Underlayment for Asphalt Shingle RoofsFact Sheet No. 7.3, Asphalt Shingle Roofing for High-Wind RegionsFact Sheet No. 7.4, Tile Roofing for High-Wind AreasFact Sheet No. 7.5, Minimizing Water Intrusion through Roof Vents in High-Wind RegionsFact Sheet No. 7.6, Metal Roof Systems in High-Wind Regions Category 8 Attachments Fact Sheet No. 8.1, Enclosures and Breakaway WallsFact Sheet No. 8.2, Decks, Pools, and Accessory StructuresFact Sheet No. 8.3, Protecting Utilities Category 9 Repairs Fact Sheet No. 9.1, Repairs, Remodeling, Additions, and Retrofitting FloodFact Sheet No. 9.2, Repairs, Remodeling, Additions, and Retrofitting Wind Category G Guide Fact Sheet No. G.1, Technical Fact Sheet GuideFact Sheet No. G.2, References and Resources"

FEMA's Hazard Mitigation Grant Program is a powerful resource in the combined effort by Federal, State, and local government, as well as private industry and homeowners, to end the cycle of repetitive disaster damage. The Robert T. Stafford Disaster Relief and Emergency Assistance Act was passed on November 23, 1988, amending Public Law 93-288, the Disaster Relief Act of 1974. The Stafford Act included Section 404, which established the Hazard Mitigation Grant Program. In 1993, the Hazard Mitigation and Relocation Act amended Section 404 to increase the amount of HMGP funds available and the cost-share to 75 percent Federal. This amendment also encouraged the use of property acquisition and other non-structural flood mitigation measures. In an effort to streamline HMGP delivery, FEMA encourages States to develop their mitigation programs before disaster strikes. States are adopting a more active HMGP management role. Increased capabilities may include: Conducting comprehensive all-hazard mitigation planning prior to disaster events; Providing applicants technical assistance on sound mitigation techniques and hazard mitigation policy and procedures; Coordinating mitigation programs through interagency teams or councils. Conducting benefit-cost analyses; and Preparing National Environmental Policy Act reviews for FEMA approval. States that integrate the HMGP with their frequently updated State Administrative and Hazard Mitigation Plans will create cohesive and effective approaches to loss reduction. This type of coordinated approach minimizes the distinction between “predisaster” and “post-disaster” time periods, and instead produces an ongoing mitigation effort. Hazard mitigation is any sustained action taken to reduce or eliminate long-term risk to people and property from natural hazards and their effects. A key purpose of the HMGP is to ensure that the opportunity to take critical mitigation measures to protect life and property from future disasters is not lost during the recovery and reconstruction process following a disaster. Program grant funds available under Section 404 of the Stafford Act provide States with the incentive and capability to implement mitigation measures that previously may have been infeasible. The purpose of this Desk Reference is to: Provide comprehensive information about FEMA's Hazard Mitigation Grant Program (HMGP); Increase awareness of the HMGP as an integral part of statewide hazard mitigation efforts; and Encourage deeper commitments and increased responsibilities on the part of all States and communities to reduce damage and losses from natural disasters. This Desk Reference is organized to simplify program information and assist the reader with practical guidance for successful participation in the program. Lists of program-related acronyms and definitions are included, along with appendices that amplify selected aspects of the HMGP. This Desk Reference is organized into 14 sections, each of which presents a major HMGP subject area. In each section, information is presented on the right side of the page. In several sections, job aids containing supplemental material are provided. The job aids for each section can be found at the end of the section. At the front of each section, there is a detailed table of contents to help you locate specific information.

The Rapid Visual Screening (RVS) handbook can be used by trained personnel to identify, inventory, and screen buildings that are potentially seismically vulnerable. The RVS procedure comprises a method and several forms that help users to quickly identify, inventory, and score buildings according to their risk of collapse if hit by major earthquakes. The RVS handbook describes how to identify the structural type and key weakness characteristics, how to complete the screening forms, and how to manage a successful RVS program.

Meant to aid State & local emergency managers in their efforts to develop & maintain a viable all-hazard emergency operations plan. This guide clarifies the preparedness, response, & short-term recovery planning elements that warrant inclusion in emergency operations plans. It offers the best judgment & recommendations on how to deal with the entire planning process -- from forming a planning team to writing the plan. Specific topics of discussion include: preliminary considerations, the planning process, emergency operations plan format, basic plan content, functional annex content, hazard-unique planning, & linking Federal & State operations.

Standard ASCE/SEI 24-05 provides minimum requirements for flood-resistant design and construction of structures located in flood hazard areas.