The main objective of the contributions contained in this volume is to present the thermodynamic foundations of the response of elastic and dissipative materials. In particular, the governing equations of non linear thermoelasticity and thermoinelasticity as well as the basic properties of these equations as resulting from the primary assumptions of continuum thermodynamics are derived. The global formulation of thermodynamics of continua is discussed. A special attention is paid to the properties of the balance equations on a singular surface. The possible forms of the second law of thermodynamics are discussed within the frame work ofaxiomatic thermodynamics. Furthermore, the thermodynamiG requirements for differ ent kinds of materials are examined. The secondary purpose of the Course was to discuss some connections between rational and classical formulations of the principles of thermodynamics. The present volume contains the texts of three (of the four delivered) Course lectures. I hope it will constitute a useful source of information on the problems presented and discussed in Udine. Special thanks are due to the International Centre for Mechanical Sciences whose direction encouraged us to prepare and to deliver the lectures.

Thermomechanics of Solids and Structures: Physical Mechanisms, Continuum Mechanics, and Applications covers kinematics, balance equations, the strict thermodynamic frameworks of thermoelasticity, thermoplasticity, creep covering constitutive equations, the physical mechanisms of deformation, along with computational aspects. The book concludes with coverage of the thermodynamics of solids and applications of the constitutive three-dimensional model to both one-dimensional homogeneous and composite beam structures. Practical applications of the theories and techniques covered are emphasized throughout the book, with analytical solutions provided for various problems. - Provides foundational knowledge on continuum mechanics, covering kinematics, balance equations, isothermal elasticity and plasticity, variational principles, and more - Presents applications of constitutive 3D models to homogeneous and composite beams, including equations for stress and displacement estimation in thermoelastic beam problems - Reviews experimental results of thermoelastic material behavior, along with case studies to support reviews - Covers the inelastic behavior of materials at elevated temperatures, with experimental results for both monotonic and cyclic tensile tests presented - Looks at the physical mechanisms, experimental results, and constitutive modeling of creep

Finite element modeling has developed into one of the most important tools at an engineer's disposal, especially in applications involving nonlinearity. While engineers coping with such applications may have access to powerful computers and finite element codes, too often they lack the strong foundation in finite element analysis (FEA) that nonline

This book presents a liber amicorum dedicated to Wolfgang H. Müller, and highlights recent advances in Prof. Müller’s major fields of research: continuum mechanics, generalized mechanics, thermodynamics, mechanochemistry, and geomechanics. Over 50 of Prof. Müller’s friends and colleagues contributed to this book, which commemorates his 60th birthday and was published in recognition of his outstanding contributions.

Thermodynamic Approaches in Engineering Systems responds to the need for a synthesizing volume that throws light upon the extensive field of thermodynamics from a chemical engineering perspective that applies basic ideas and key results from the field to chemical engineering problems. This book outlines and interprets the most valuable achievements in applied non-equilibrium thermodynamics obtained within the recent fifty years. It synthesizes nontrivial achievements of thermodynamics in important branches of chemical and biochemical engineering. Readers will gain an update on what has been achieved, what new research problems could be stated, and what kind of further studies should be developed within specialized research. - Presents clearly structured chapters beginning with an introduction, elaboration of the process, and results summarized in a conclusion - Written by a first-class expert in the field of advanced methods in thermodynamics - Provides a synthesis of recent thermodynamic developments in practical systems - Presents very elaborate literature discussions from the past fifty years

The main objective of the contributions contained in this volume is to present the thermodynamic foundations of the response of elastic and dissipative materials. In particular, the governing equations of non linear thermoelasticity and thermoinelasticity as well as the basic properties of these equations as resulting from the primary assumptions of continuum thermodynamics are derived. The global formulation of thermodynamics of continua is discussed. A special attention is paid to the properties of the balance equations on a singular surface. The possible forms of the second law of thermodynamics are discussed within the frame work ofaxiomatic thermodynamics. Furthermore, the thermodynamiG requirements for differ ent kinds of materials are examined. The secondary purpose of the Course was to discuss some connections between rational and classical formulations of the principles of thermodynamics. The present volume contains the texts of three (of the four delivered) Course lectures. I hope it will constitute a useful source of information on the problems presented and discussed in Udine. Special thanks are due to the International Centre for Mechanical Sciences whose direction encouraged us to prepare and to deliver the lectures.

Recent Advances in Computational Mechanics contains selected papers presented at the jubilee 20th Conference on Computer Methods in Mechanics (CMM 2013), which took place from 27 to 31 August 2013 at the Poznan University of Technology. The first Polish Conference on Computer Methods in Mechanics was held in Poznan in 1973. This very successful me

This book discusses the extension of classical continuum models. To the first class addressed belong various thermodynamic models of multicomponent systems, and to the second class belong primarily microstructures created by phase transformations.

Contributed by world-renowned specialists on the occasion of Paul Germain's 80th birthday, this unique book reflects the foundational works and the intellectual influence of this author. It presents the realm of modern thermomechanics with its extraordinary wealth of applications to the behaviour of materials, whether solid or fluid. The thirty-one contributions follow an easygoing autobiographical sketch by Paul Germain, and highlight the power and richness of a methodological approach to the phenomenology of many materials. This approach combines harmoniously thermodynamics and continuum theory in order to provide exploitable, thermodynamically admissible models of a large variety of behaviours and phenomena, including those of diffusion, thermoelasticity, viscoplasticity, relaxation, hysteresis, wetting, shape-memory effects, growth, phase transitions, stability, fracture, shocks, machining of materials, microstructured solids, complex fluids, etc. Especially aimed at graduate students, researchers, and engineers in mechanical engineering and materials science, this book also presents the state of the art in an active field of research and opens new horizons in other scientific fields, such as applied mathematics and applied physics, because of the intellectual satisfaction and remarkable efficiency provided by the advocated approach.