This report presents a cost analysis of Purified Isophthalic Acid (PIA) production from m-xylene. The process examined is a typical oxidation process. In this process, p-xylene is oxidized to Isophthalic Acid. The Isophthalic Acid from reaction is separated as a Crude Isophthalic Acid (CIA) intermediate. The CIA is subjected to purification via hydrogenation in order to obtain PIA as the final product. This report was developed based essentially on the following reference(s): Keywords: Unsaturated Polyester, UPR, Phthalic Acid, Meta-Xylene, PIA

The Effect of Sterilization Methods on Plastics and Elastomers, Fourth Edition brings together a wide range of essential data on the sterilization of plastics and elastomers, thus enabling engineers to make optimal material choices and design decisions. The data tables in this book enable engineers and scientists to select the right materials and sterilization method for a given product or application. The book is a unique and essential reference for anybody working with plastic materials that are likely to be exposed to sterilization methods, be it in medical device or packaging development, food packaging or other applications. - Presents essential data and practical guidance for engineers and scientists working with plastics in applications that require sterile packaging and equipment - Updated edition removes obsolete data, updates manufacturers, verifies data accuracy, and adds new plastics materials for comparison - Provides essential information and guidance for FDA submissions required for new medical devices

Guides readers through the entire process of liquid filtrations, from a basic understanding and lab scale testing to advanced process applications and up-scaling of processes Wet Cake Filtration is a key method in solid-liquid separation and plays an important role in many industrial processes from the separation of solid products from a liquid, to removing contaminants in wastewater treatment. Furthermore, separation processes are rarely isolated and the integration as well as necessary pre-treatments in the process chain must be carefully considered and implemented. Supported by more than 40 years of research, development, and teaching, this book provides a comprehensive treatment of all relevant aspects in wet cake filtration as a key method in solid-liquid-separation. The first part of Wet Cake Filtration: Fundamentals, Equipment, Strategies discusses general principles and applications of wet cake filtration, determination of proper feed streams, and filter cake formation. The next chapters deal with variations of pre-treatment and process conditions, including necessary aspects of lab scale tests, up-scaling, and filter design. This is further strengthened with chapters examining particle purification, yield maximization, and cake deliquoring. Lastly, the filter media is discussed as the central piece of wet cake filtration. Beside the different possibilities of available filter media structures and process relevant aspects of filter media selection, the reliable characterization of pore sizes by porometry and innovative additional functionalities are introduced. -Provides information on wet cake filtration?the necessary pre-treatments and process considerations?to guide the reader to develop or improve their own processes -Offers the necessary tools that allow the engineer to transform a lab scale test into a scaled-up process -Presents cake filtration process-related topics like slurry characterization or slurry pretreatment, and special developments such as hyperbaric filtration or steam pressure filtration -Discusses promising new processes like gasless cake desaturation and shrinkage crack free cake desaturation Wet Cake Filtration is a must-have resource for every engineer working with wet cake filtration, including water chemists, catalytic chemists, food chemists, chemical engineers, biotechnologists, and process engineers.

Permeability properties are essential data for the selection of materials and design of products across a broad range of market sectors from food packaging to Automotive applications to Medical Devices. This unique handbook brings together a wealth of permeability data in a form that enables quick like-for-like comparisons between materials. The data is supported by a full explanation of its interpretation, and an introduction to the engineering aspects of permeability in polymers. The third edition includes expanded explanatory text which makes the book accessible to novices as well as experienced engineers, written by industry insider and author Larry McKeen (DuPont), and 20% new data and major new explanatory text sections to aid in the interpretation and application of the data. - A unique collection of permeability data designed to enable quick like-for-like comparisons between different materials - Third edition includes 20% new data and expanded explanatory text, which makes the book accessible to novices as well as experienced engineers - Essential reference for materials engineers, design engineers and applications engineers across sectors including packaging, automotive and medical devices

No book has been published that gives a detailed description of all the types of plastic materials used in medical devices, the unique requirements that the materials need to comply with and the ways standard plastics can be modified to meet such needs. This book will start with an introduction to medical devices, their classification and some of the regulations (both US and global) that affect their design, production and sale. A couple of chapters will focus on all the requirements that plastics need to meet for medical device applications. The subsequent chapters describe the various types of plastic materials, their properties profiles, the advantages and disadvantages for medical device applications, the techniques by which their properties can be enhanced, and real-world examples of their use. Comparative tables will allow readers to find the right classes of materials suitable for their applications or new product development needs.

Part of a series of core databooks within the William Andrew Plastics Design Library, Fatigue and Tribological Properties of Plastics and Elastomers provides a comprehensive collection of graphical multipoint data and tabular data covering fatigue and tribology.The concept of fatigue is very straightforward: if an object is subjected to a stress or deformation, and it is repeated, the object becomes weaker. This weakening of plastic material is called fatigue. Tribology is the science and technology of surfaces in contact with each other and therefore covers friction, lubrication and wear. The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues for engineers and scientists involved in the plastics industry and product design with plastics.Fatigue and Tribological Properties of Plastics and Elastomers, Second Edition is an update of all that has changed in the world of plastics since the 1st edition appeared nearly 15 years ago, and has been reorganized from a polymer chemistry point of view. - A hard-working reference tool: part of the daily workflow of engineers and scientists involved in the plastics industry and product design with plastics - The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues - The data in this book provide engineers with the tools they need to design for low failure rates

This book focuses on the polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasizes the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. With major sections for each additive function, this book provides a highly practical guide for engineers and scientists creating and using polyolefin compounds, who will find in this book a wealth of detail and practical guidance. This unique resource will enable them to make practical decisions about the use of the various additives, fillers, and reinforcements specific to this family of materials. ABOUT THE AUTHOR Michael Tolinski is a freelance writer and a lecturer at the University of Michigan's College of Engineering. He is a frequent contributor to Plastics Engineering and Manufacturing Engineering. - Structured to make it easy for the reader to find solutions for specific property requirements - Contains a number of short case studies about companies that have used or developed a particular additive to achieve a desired result - Covers environmental resistance, mechanical property enhancement, appearance enhancement, processing aids, and other modifications of form and function

Handbook of Adhesives and Surface Preparation provides a thoroughly practical survey of all aspects of adhesives technology from selection and surface preparation to industrial applications and health and environmental factors. The resulting handbook is a hard-working reference for a wide range of engineers and technicians working in the adhesives industry and a variety of industry sectors that make considerable use of adhesives. Particular attention is given to adhesives applications in the automotive, aerospace, medical, dental and electronics sectors. - A handbook that truly focuses on the applied aspects of adhesives selection and applications: this is a book that won't gather dust on the shelf - Provides practical techniques for rendering materials surfaces adherable - Sector-based studies explore the specific issues for automotive and aerospace, medical, dental and electronics

In recent years, the applications of fluoropolymer additives have expanded significantly, with even the meaning of 'fluoropolymer additives' expanding from relatively the narrow definition of PTFE powder fillers to a wide variety of fluoropolymer elastomers, used as a processing aid for plastics processing such as extrusion, injection molding, and film blowing. The benefits of fluoropolymer additives used in plastics are the elimination of sharkskin defects, increases in process speed and output (up to 20%), the reduction of die build up, the reduction of gels and optical defects, etc. In addition, fluropolymer additives are being increasingly used in inks, lubricants, and coatings. For example, in the coating industry fluoropolymer additives can increase the life cycle of exterior coatings due to their excellent weatherability and subsequently increase the time between recoats. Engineers and scientist involved in polymer processing need practical information about these additives, their applications, and proper and safe handling. Until now much of this information has been difficult to obtain because of commercial secrecy. Existing books on polymer additives only include the briefest of coverage of fluoropolymer additives. In this first book on an additive group of growing importance, the authors review the commercial additives available on the market. The applications chapters provide readers with a step by step description of techniques to select and incorporate these additives in various products. UNIQUE FEATURES AND BENEFITS: Fluoropolymer additives are becoming more widely used with key applications including use as a polymer processing aid (increasing speed and reducing faults) and as an additive to lubricants, inks and coatings. This book is the only practical guide available to the selection and use of fluoropolymer additives, and will help readers to optimize existing fluoropolymer applications and implement new ones. Fluoropolymers are known as an area where detailed information is hard to come by. In this book two former DuPont employees provide a wide range of industry sectors with the essential practical information and data they need to realize the full benefits of fluoropolymer additives. Written for practicing engineers, Ebnesajjad and Morgan take a highly practical approach to the subject, based on real-world experience and case studies.