Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product.Create your own STM32 programs with ease!Get up and running programming the STM32 line of microcontrollers from STMicroelectronics using the hands-on information contained in this easy-to-follow guide. Written by an experienced electronics hobbyist and author, Programming with STM32: Getting Started with the Nucleo Board and C/C++ features start-to-finish projects that clearly demonstrate each technique. Discover how to set up a stable development toolchain, write custom programs, download your programs to the development board, and execute them. You will even learn how to work with external servos and LED displays!•Explore the features of STM32 microcontrollers from STMicroelectonics•Configure your Nucleo-64 Microcontroller development board•Establish a toolchain and start developing interesting applications •Add specialized code and create cool custom functions•Automatically generate C code using the STM32CubeMX application•Work with the ARM Cortex Microcontroller Software Interface Standard and the STM hardware abstraction layer (HAL).•Control servos, LEDs, and other hardware using PWM•Transfer data to and from peripheral devices using DMA•Generate waveforms and pulses through your microcontroller’s DAC

Using FreeRTOS and libopencm3 instead of the Arduino software environment, this book will help you develop multi-tasking applications that go beyond Arduino norms. In addition to the usual peripherals found in the typical Arduino device, the STM32 device includes a USB controller, RTC (Real Time Clock), DMA (Direct Memory Access controller), CAN bus and more. Each chapter contains clear explanations of the STM32 hardware capabilities to help get you started with the device, including GPIO and several other ST Microelectronics peripherals like USB and CAN bus controller. You’ll learn how to download and set up the libopencm3 + FreeRTOS development environment, using GCC. With everything set up, you’ll leverage FreeRTOS to create tasks, queues, and mutexes. You’ll also learn to work with the I2C bus to add GPIO using the PCF8574 chip. And how to create PWM output for RC control using hardware timers. You'll be introduced to new concepts that are necessary to master the STM32, such as how to extend code with GCC overlays using an external Winbond ​W25Q32 flash chip. Your knowledge is tested at the end of each chapter with exercises. Upon completing this book, you’ll be ready to work with any of the devices in the STM32 family. Beginning STM32 provides the professional, student, or hobbyist a way to learn about ARM without costing an arm! What You'll Learn Initialize and use the libopencm3 drivers and handle interrupts Use DMA to drive a SPI based OLED displaying an analog meter Read PWM from an RC control using hardware timers Who This Book Is For Experienced embedded engineers, students, hobbyists and makers wishing to explore the ARM architecture, going beyond Arduino limits.

This book covers the peripheral programming of the STM32 Arm chip. Throughout this book, we use C language to program the STM32F4xx chip peripherals such as I/O ports, ADCs, Timers, DACs, SPIs, I2Cs and UARTs. We use STM32F446RE NUCLEO Development Board which is based on ARM(R) Cortex(R)-M4 MCU. Volume 1 of this series is dedicated to Arm Assembly Language Programming and Architecture. See our website for other titles in this series: www.MicroDigitalEd.com You can also find the tutorials, source codes, PowerPoints and other support materials for this book on our website.

ARM-based Microcontroller Projects Using mbed gives readers a good understanding of the basic architecture and programming of ARM-based microcontrollers using ARM's mbed software. The book presents the technology through a project-based approach with clearly structured sections that enable readers to use or modify them for their application. Sections include: Project title, Description of the project, Aim of the project, Block diagram of the project, Circuit diagram of the project, Construction of the project, Program listing, and a Suggestions for expansion. This book will be a valuable resource for professional engineers, students and researchers in computer engineering, computer science, automatic control engineering and mechatronics. - Includes a wide variety of projects, such as digital/analog inputs and outputs (GPIO, ADC, DAC), serial communications (UART, 12C, SPI), WIFI, Bluetooth, DC and servo motors - Based on the popular Nucleo-L476RG development board, but can be easily modified to any ARM compatible processor - Shows how to develop robotic applications for a mobile robot - Contains complete mbed program listings for all the projects in the book

Build a strong foundation in designing and implementing real-time systems with the help of practical examples Key Features Get up and running with the fundamentals of RTOS and apply them on STM32 Enhance your programming skills to design and build real-world embedded systems Get to grips with advanced techniques for implementing embedded systems Book DescriptionA real-time operating system (RTOS) is used to develop systems that respond to events within strict timelines. Real-time embedded systems have applications in various industries, from automotive and aerospace through to laboratory test equipment and consumer electronics. These systems provide consistent and reliable timing and are designed to run without intervention for years. This microcontrollers book starts by introducing you to the concept of RTOS and compares some other alternative methods for achieving real-time performance. Once you've understood the fundamentals, such as tasks, queues, mutexes, and semaphores, you'll learn what to look for when selecting a microcontroller and development environment. By working through examples that use an STM32F7 Nucleo board, the STM32CubeIDE, and SEGGER debug tools, including SEGGER J-Link, Ozone, and SystemView, you'll gain an understanding of preemptive scheduling policies and task communication. The book will then help you develop highly efficient low-level drivers and analyze their real-time performance and CPU utilization. Finally, you'll cover tips for troubleshooting and be able to take your new-found skills to the next level. By the end of this book, you'll have built on your embedded system skills and will be able to create real-time systems using microcontrollers and FreeRTOS.What you will learn Understand when to use an RTOS for a project Explore RTOS concepts such as tasks, mutexes, semaphores, and queues Discover different microcontroller units (MCUs) and choose the best one for your project Evaluate and select the best IDE and middleware stack for your project Use professional-grade tools for analyzing and debugging your application Get FreeRTOS-based applications up and running on an STM32 board Who this book is for This book is for embedded engineers, students, or anyone interested in learning the complete RTOS feature set with embedded devices. A basic understanding of the C programming language and embedded systems or microcontrollers will be helpful.

EMBEDDED DIGITAL CONTROL WITH MICROCONTROLLERS Explore a concise and practical introduction to implementation methods and the theory of digital control systems on microcontrollers Embedded Digital Control with Microcontrollers delivers expert instruction in digital control system implementation techniques on the widely used ARM Cortex-M microcontroller. The accomplished authors present the included information in three phases. First, they describe how to implement prototype digital control systems via the Python programming language in order to help the reader better understand theoretical digital control concepts. Second, the book offers readers direction on using the C programming language to implement digital control systems on actual microcontrollers. This will allow readers to solve real-life problems involving digital control, robotics, and mechatronics. Finally, readers will learn how to merge the theoretical and practical issues discussed in the book by implementing digital control systems in real-life applications. Throughout the book, the application of digital control systems using the Python programming language ensures the reader can apply the theory contained within. Readers will also benefit from the inclusion of: A thorough introduction to the hardware used in the book, including STM32 Nucleo Development Boards and motor drive expansion boards An exploration of the software used in the book, including Python, MicroPython, and Mbed Practical discussions of digital control basics, including discrete-time signals, discrete-time systems, linear and time-invariant systems, and constant coefficient difference equations An examination of how to represent a continuous-time system in digital form, including analog-to-digital conversion and digital-to-analog conversion Perfect for undergraduate students in electrical engineering, Embedded Digital Control with Microcontrollers will also earn a place in the libraries of professional engineers and hobbyists working on digital control and robotics systems seeking a one-stop reference for digital control systems on microcontrollers.

This book introduces basic programming of ARM Cortex chips in assembly language and the fundamentals of embedded system design. It presents data representations, assembly instruction syntax, implementing basic controls of C language at the assembly level, and instruction encoding and decoding. The book also covers many advanced components of embedded systems, such as software and hardware interrupts, general purpose I/O, LCD driver, keypad interaction, real-time clock, stepper motor control, PWM input and output, digital input capture, direct memory access (DMA), digital and analog conversion, and serial communication (USART, I2C, SPI, and USB).